BS EN 62282-3-200:2016 - Fuel cell technologies. Stationary fuel cell power systems. Performance test methods

BS EN 62282-3-200:2016

Fuel cell technologies. Stationary fuel cell power systems. Performance test methods

Status : Current   Published : March 2016



This part of IEC 62282 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows:

  • power output under specified operating and transient conditions;

  • electrical and heat recovery efficiency under specified operating conditions;

  • environmental characteristics; for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions.

This standard does not provide coverage for electromagnetic compatibility (EMC).

This standard does not apply to small stationary fuel cell power systems with electric power output of less than 10 kW which are dealt with IEC 62282‑3‑201.

Fuel cell power systems may have different subsystems depending upon types of fuel cell and applications, and they have different streams of material and energy into and out of them. However, a common system diagram and boundary has been defined for evaluation of the fuel cell power system (see Figure 1).

The following conditions are considered in order to determine the system boundary of the fuel cell power system:

  • all energy recovery systems are included within the system boundary;

  • all kinds of electric energy storage devices are considered outside the system boundary;

  • calculation of the heating value of the input fuel (such as natural gas, propane gas and pure hydrogen gas, etc.) is based on the conditions of the fuel at the boundary of the fuel cell power system.

[Image removed.]

Standard NumberBS EN 62282-3-200:2016
TitleFuel cell technologies. Stationary fuel cell power systems. Performance test methods
Publication Date31 March 2016
Normative References(Required to achieve compliance to this standard)ISO 11541, ISO 7934, EN ISO 10523, EN 61672-2, ISO 10849, EN ISO 11541, EN 61143, EN 60051, IEC 62282-3-201, ISO 6975, IEC 60688, ISO 11564, ASTM F2602, EN 61672-1, ISO 6060, EN 61000-4-13, ASTM D4809, ISO 5815-2, IEC 61028, ISO 5167, ISO 3744, ISO 8217:2017, ISO/IEC Guide 98-3:2008, ISO 3648, ISO 4677-1, ISO 4677-2, ISO 6974, IEC 61000-4-7, EN ISO 6975, ISO 10101, IEC 60359, IEC 61000-4-13, ISO 16622, EN 61000-4-7, IEC 61672-1, ISO 11042-2, ISO 14687-1, EN 62282-3-201, ISO 10523, EN ISO 6974, EN 50470-1, IEC 61672-2, ISO 6326, ISO 7935, EN ISO 6326, IEC 61143, EN 62053-22, EN 61028, EN ISO 10101, ISO 10396, ISO 11042-1, EN ISO 5167, EN 60359, EN 60688, ISO/TR 15916, EN ISO 3744, ISO 11632, IEC 62052-11, IEC 60051, IEC 62053-22, ISO 5348
Informative References(Provided for Information)ISO 6976:1995, IEC 60050-151, EN ISO 6976:2005, IEC TS 62282-1:2013, IEC 60050-300, ISO 9000, ASME PTC 50, IEC 60050, EN ISO 9000, ISO 14687-3, ISO 10780, ISO 11086
ReplacesBS EN 62282-3-200:2012
International RelationshipsEN 62282-3-200:2016,IEC 62282-3-200:2015
Draft Superseded By14/30280137 DC
DescriptorsEfficiency, Thermal efficiency, Stationary, Energy technology, Direct energy conversion, Performance testing, Power output, Fuels, Electrical testing, Electric cells, Fuel cells, Environmental engineering
Title in FrenchTechnologies des piles à combustible. Systèmes à piles à combustible stationnaires. Méthodes d'essai des performances
Title in GermanBrennstoffzellentechnologien. Stationäre Brennstoffzellen-Energiesysteme. Leistungskennwerteprüfverfahren
ISBN978 0 580 82344 2
File Size2.93 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Develop a PAS

Develop a fast-track standardization document in 9-12 months


Access, view and download standards with multiple user access, across multiple sites with BSOL

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version