BS EN IEC 61800-3:2018 - Adjustable speed electrical power drive systems. EMC requirements and specific test methods

BS EN IEC 61800-3:2018

Adjustable speed electrical power drive systems. EMC requirements and specific test methods

Status : Current, Work in hand   Published : September 2018

Format
PDF

Format
HARDCOPY



IEC 61800-3:2017 is also available as

IEC 61800-3:2017 RLV

which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.



IEC 61800-3:2017 specifies electromagnetic compatibility (EMC) requirements for power drive systems (PDSs, defined in 3.1). These are adjustable speed AC or DC motor drives. Requirements are stated for PDSs with converter input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS.


This third edition cancels and replaces the second edition published in 2004 and Amendment 1:2011. This edition constitutes a technical revision.


This edition includes the following significant technical changes with respect to the previous edition:


a) clarification of requirements for the test report, particularly when a number of alternative test methods exist;


b) introduction of a more detailed test setup for radiated emission measurements, along with the introduction of a 3 m measurement distance for small size equipment;


c) general updates in the informative annexes.




Standard NumberBS EN IEC 61800-3:2018
TitleAdjustable speed electrical power drive systems. EMC requirements and specific test methods
StatusCurrent, Work in hand
Publication Date18 September 2018
Normative References(Required to achieve compliance to this standard)CISPR 32:2015, EN 61000-3-3:2013, EN 55016-1-2:2014, IEC 61000-4-13:2002, EN 61000-3-12:2011, IEC 61000-4-34:2005, IEC 61000-4-5:2014, EN 61000-4-13:2002, CISPR 11:2015/AMD1:2016, EN 61000-4-6:2014, CISPR 22, EN 61000-3-11:2000, EN 55011:2016, EN 61000-4-5:2014, CISPR 16-1-4:2010, IEC 61000-4-6:2013, IEC 61000-4-8:2009, EN 61000-4-3:2006, CISPR 11:2015, IEC 61000-3-12:2011, IEC 61000-3-2:2014, IEC 61000-2-2:2002, EN 61000-3-2:2014, EN 55011:2016/A1:2017, EN 55032:2015, IEC 61000-4-4:2012, EN 61000-4-34:2007, EN 60146-1-1:2010, EN 61000-4-4 (IEC 61000-4-4:2004) AS, IEC 61000-4-2:2008, IEC 61000-4-3:2006, EN 61000-2-4 (IEC 61000-2-4:2002) AS, IEC 61000-4-11:2004, CISPR 16-1-2:2014, IEC 61000-2-4:2002, IEC 61000-3-11:2000, IEC 61000-3-3:2013, IEC 60146-1-1:2009, EN 55016-1-4:2010, EN 61000-2-2 (IEC 61000-2-2:2002) AS, EN 61000-4-2:2009, EN 61000-4-8:2010, EN 61000-4-11 (IEC 61000-4-11:2004) AS
Informative References(Provided for Information)EN 55014-1:2017, EN 61400-21:2008, IEC 61557-8:2014, EN 61000-6-5:2015, IEC 60038:2009, IEC 61000-2-12:2003, IEC 60146-1-3:1991, EN 60146-1-3:1993, EN 61000-6-4:2007, EN 61000-2-12 (IEC 61000-2-12:2003) AS, CISPR 16-2-3:2016, IEC 60364-1:2005, EN 61000-4-10:2017, IEC 61000-6-5:2015, EN IEC 61000-6-2:2019, IEC 61400-21:2008, CISPR 16-2-1:2014, IEC 61800-1:1997, EN 61800-2:2015, IEC 61800-4:2002, IEC 61000-6-2:2016, EN 61800-5-1:2007, BS EN IEC 61000-6-2:2019, EN 60146-2:2000, EN 61557-8:2015, EN 61557-9, EN 60065, HD 60664-1:2007, EN 61000-4, IEC 61557-9, IEC 60065, EN 61800-4:2003, EN 61000-6-1:2018, EN 61800-1:1998, IEC 61000-4, IEC 60664-1:2007, IEC 61000-6-4:2006, IEC 60146-2:1999, HD 60364-1 (IEC 60364-1:2005 Mod), IEC 61000-4-7:2002, EN 61000-4-9:2016, IEC 61000-6-1:2016, EN 61000-4-7:2002, IEC 61800-5-1:2007, IEC 61800-2:2015, IEC 61000-4-9:2016, CISPR 14-1:2016, EN 55016-2-3:2017, EN 55016-2-1:2014, IEC 61000-4-10:2016, EN 60038:2011
ReplacesBS EN 61800-3:2004+A1:2012
International RelationshipsEN 60626-3:2008,EN IEC 61800-3:2018,IEC 61800-3:2017
Draft Superseded By14/30279327 DC
DescriptorsInstallation, Circuits, Electrical equipment, Electrical transmission systems, Industrial facilities, Electric motors, Power transmission systems, Harmonics, Electromagnetic fields, Low frequencies, Adjustment, Compatibility, Radio disturbances, Velocity, Voltage fluctuations, Testing conditions, Electrical safety, Electromagnetic compatibility, Electrical testing, High frequencies, Performance
ICS29.200
33.100.01
Title in FrenchEntraînements électriques de puissance à vitesse variable Exigences de CEM et méthodes d'essais spécifiques
Title in GermanDrehzahlveränderbare elektrische Antriebssysteme EMV-Anforderungen einschließlich spezieller Prüfverfahren
CommitteePEL/22
ISBN978 0 580 82154 7
PublisherBSI
FormatA4
DeliveryYes
Pages128
File Size2.272 MB
Price£314.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world