BS EN 50411-2-10:2015 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks

BS EN 50411-2-10:2015

Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks

Status : Current   Published : January 2015

Format
PDF

Format
HARDCOPY



1.1 Product definition This specification contains the dimensional, optical, mechanical and environmental performance requirements of a fully installed splice closure for use in optical distribution networks at ground level (category G) in order for it to be categorised as an EN standard product. This type of sealed closure is intended for easy and/or frequent opening and closing in FTTH distribution and drop cable networks. NOTE The sealing performance requirements and test severities of these closures are selected to obtain an IP 67 intrusion protection performance as defined in EN 60529. 1.2 Operating environment The tests selected combined with the severity and duration are representative of an outside plant for ground level environment defined by EN 61753-1, category G: ground level. This corresponds with: - operating temperature range: -40 °C to +65 °C; - direct exposure to non weather protected outside plant conditions; - deployment at ground level up to 3 metres above ground level; - additionally to the category G environment, a deployment till 1 metre below ground level is added. Direct buried applications are allowed, however additional protection will be required when the locations are intended for passage of cars or other heavy vehicles. 1.3 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.4 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 1.5 Allowed fibre and cable types Although the performance tests are carried out on test samples containing dispersion unshifted single mode fibre (see Annex A), the closure, once tested according to this product specification, will be also suited for other fibre types like dispersion shifted, non-zero dispersion shifted and multimode fibres. This closure standard allows both single mode and multimode fibre to be used and covers IEC standard optical fibre cables with their various fibre capacities, types and designs. This includes, but is not limited to, optical fibre cable standards EN 60794-2 (indoor), EN 60794-3 (outdoor).




Standard NumberBS EN 50411-2-10:2015
TitleFibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks
StatusCurrent
Publication Date31 January 2015
Normative References(Required to achieve compliance to this standard)EN 60793-2-50, IEC 61300-3-3, IEC 61300-2-4, IEC 60793-2-50, IEC 61300-2-22, IEC 61300-2-38, IEC 61300-2-23, IEC 61300-3-28, IEC 61300-2-12, EN 61300-2-12, IEC 61300-2-10, EN 61300-3-1, EN 61300-2-33, BS EN IEC 61753-1:2018, EN 60794-2:2017, BS EN 61753-1, EN IEC 61753-1:2018, IEC 61753-1:2018, IEC 60794-2:2017, EN 61300-2-23, IEC 61300-2-33, IEC 61300, EN 61300-2-26, EN 61300-2-10, EN 61300-2-38, EN 61300, EN 61300-2-5, EN 61300-3-28, IEC 61300-2-5, IEC 61300-2-34, EN 61300-2-4, EN 61300-2-34, IEC 61300-2-37, IEC 61300-2-1, EN 61300-2-22, IEC 61300-3-1, EN 61300-2-1, IEC 61300-2-26, EN 61300-3-3, EN 61300-2-37
Informative References(Provided for Information)No other standards are informatively referenced
International RelationshipsEN 50411-2-10:2015
Draft Superseded By13/30277630 DC
DescriptorsMechanical properties of materials, Closures, Fibre optic connectors, Communication cables, Dimensions, Specification (approval), Performance, Optical fibres, Sealed, Environmental testing, Fibre optics, Fibre optic cables, Optical communication systems, Optical properties of materials
ICS33.180.20
Title in FrenchOrganiseurs et boîtiers de fibres à utiliser dans les systèmes de communication par fibres optiques. Spécifications de produits. Boîtiers à épissure de fibres scellés Type 2, catégorie G, pour réseaux de distribution optiques FttH
Title in GermanLWL-Spleißkassetten und -Muffen für die Anwendung in LWL-Kommunikationssystemen. Produktnormen. Abgedichtete LWL-Muffen Typ 2 für die Kategorie G für optische FTTH-Verteilnetze
CommitteeGEL/86/2
ISBN978 0 580 81844 8
PublisherBSI
FormatA4
DeliveryYes
Pages26
File Size788 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards