BS EN 81-22:2014 - Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Electric lifts with inclined path

BS EN 81-22:2014

Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Electric lifts with inclined path

Status : Under review, Current   Published : June 2014

Format
PDF

Format
HARDCOPY



1.1 This European Standard specifies the safety rules for the construction and installation of permanently installed new electric lifts, with traction or positive drive, serving defined landings levels, having a vehicle designed to convey passengers or passengers and loads, suspended by ropes or chains and travelling in a vertical plan along guide rails that are inclined at an angle of between 15° and 75° in relation to the horizontal. 1.2 In addition to the requirements of this standard, supplementary requirements should be considered in special cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dangerous goods, etc.). 1.3 This European Standard does not cover: a) lifts with drives other than those stated in 1.1; b) installation of electric lifts in existing buildings to the extent that space does not permit; c) important modifications (see Annex E) to a lift installed before this standard is brought into application; d) lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances; e) safety during transport, installation, repairs, and dismantling of lifts; f) lifts with rated speed ? 0,15 m/s. However, this standard may usefully be taken as a basis. Noise is not dealt with in this standard because it is not relevant to the safe use of the lift. Vibrations are dealt with for electric parts only. Direct effects on human bodies are not considered as harmful. 1.4 This European Standard does not specify the additional requirements necessary for the use of lifts in case of fire. 1.5 Taking into account the state of art, the scope of the present standard is limited as follows: - inclination: a variation in inclination is permitted for the travel path; - travel path: confined within the vertical plane; - maximum capacity of the car: 7 500 kg (100 passengers); - maximum rated speed (v): 4 m/s. Both characteristics (capacity and speed) are linked by the relation given in the following Figure 1. (...) The standard applies to all the constituent components of the lift including: running tracks, guides, safety gear operating device, counter-rails, but excludes the supporting structures, civil engineering structures and anchorages that are dealt with by other regulations. 1.6 This standard is not applicable for inclined lifts which are manufactured before the date of its publication as EN.




Standard NumberBS EN 81-22:2014
TitleSafety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Electric lifts with inclined path
StatusUnder review, Current
Publication Date30 June 2014
Normative References(Required to achieve compliance to this standard)IEC 61508-1:2010, HD 60364-6:2007, IEC 60947-5-1:2003, EN 60204-1:2006, IEC 62326-1:2002, IEC 60068-2-27:2008, IEC 61249-2, IEC 60227-4, IEC 60364-6:2006, IEC 60227-5, IEC 60947-4-1:2009, IEC 60068-2-6:2007, HD 21.3 S3, EN 61558-1:2005, IEC 60364-4-41:2005, EN 60068-2-14:2009, EN ISO 12100:2010, ISO 12100:2010, HD 22.4 S4, EN 61249-2, HD 60364-4-41:2007, IEC 61508-7:2010, EN 60747-5-5:2011, ISO 7465:2007, IEC 60068-2-14:2009, HD 214 S2, EN 60664-1:2007, EN 61508-7:2010, EN 131-2:2010+A1:2012, EN 81-58:2003, EN 50214:2006, EN 81-28:2003, EN 13796-1:2005, EN 12015:2014, IEC 60112, EN 13015:2001+A1:2008, EN 60529:1991, EN 12016:2013, EN 10025-2:2004, EN 81-1:1998+A3:2009, EN 60947-5-1:2004, EN 60947-4-1:2010, EN 60068-2-6:2008, IEC 60529:1989, IEC 60664-1:2007, IEC 60227-3, IEC 61439-1:2011, IEC 61558-1:2005, EN 61508-1:2010, IEC 60204-1:2005, IEC 61508-3:2010, IEC 60747-5-5:2007, EN 60068-2-27:2009, HD 21.4 S2, EN 60269-1:2007, EN ISO 13857:2008, IEC 60269-1:2006, IEC 61508-2:2010, EN 61508-2:2010, HD 21.5 S3, EN 61508-3:2010, EN 61800-5-2:2007, IEC 61800-5-2:2007, EN 6232
Informative References(Provided for Information)CEN/TR 14819-1:2004, EN 81-77:2013, DIN 51130, BGR 181:2003, IEC 60364-5-54, IEC 61508-4, EN ISO/IEC 17025, EN 1991-1-4, EN 12930, EN 61508-6, 95/16/EC, EN 61508-4, EN 60204, EN ISO/IEC 17065, EN 1997-1, EN 12929-1, IEC 61508-6, IEC 60204, EN 61508-5, EN 1998-1, EN 13107, EN 1991-1, IEC 61508-5, HD 516 S2, ISO/IEC 17065, CEN/TR 81-10, ISO/IEC 17025, HD 60364-5-54
International RelationshipsEN 81-22:2014
DescriptorsElectrical protection equipment, Lifts, Lift wells, Construction, Warning devices, People, Signals, Installation, Safety, Electric lifts, Landing doors
ICS91.140.90
Title in FrenchRègles de sécurité pour la construction et l'installation des ascenseurs. Ascenseurs pour le transport de personnes et d'objets. Ascenseurs électriques à voie inclinée
Title in GermanSicherheitsregeln für die Konstruktion und den Einbau von Aufzügen. Aufzüge für den Personen- und Gütertransport. Elektrisch betriebene Aufzüge mit geneigter Fahrbahn
CommitteeMHE/4
ISBN978 0 580 81297 2
PublisherBSI
FormatA4
DeliveryYes
Pages212
File Size4.042 MB
Price£378.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards