PD CEN/TR 16514:2013 - Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol

PD CEN/TR 16514:2013

Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol

Status : Current   Published : June 2013



This Technical Report presents an overview and time plan for test methods and requirements that could be expected for future unleaded petrol and petrol blends in Europe. This means unleaded petrol with an ethanol/oxygenates level higher than allowed in the Fuels Quality Directive, Annex I [4], which is petrol containing up to 3,7 % (m/m) of oxygen, more familiarly known as E10. Specific issues that may apply for certain levels or types of oxygenates are highlighted where appropriate in the appropriate sections of this report. This report does not take into account all issues related to vehicles that are specially designed to run on a much wider range of oxygenate contents above E10+, for example up to E85. The report covers fuels and vehicle concepts for both E10+-capable (without engine efficiency gains) and E10+-optimised (with engine efficiency gains). NOTE 1 Following the large possible combinations and levels of oxygenates, the work focuses on unleaded petrol with a nominal ethanol content between 10 % (V/V) and 25 % (V/V). Once the ethanol is higher than approximately 20 % to 25 % (depending on the vehicle) more engine and vehicle measures would likely be needed. NOTE 2 For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, ?, respectively. NOTE 3 Although EN 228 speaks about and defines "unleaded petrol", the wording "petrol" is used throughout this document for the sake of readability.

Standard NumberPD CEN/TR 16514:2013
TitleAutomotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
Publication Date30 June 2013
Normative References(Required to achieve compliance to this standard)EN 228, EN 14214, EN 15376
Informative References(Provided for Information)CONCAWE report 3/08, 98/70/EC, 93/12/EEC, 2003/17/EC, 2009/30/EC, 1999/32/EC, 2009/28/EC, 2001/77/EC, 2003/30/EC, 2011/63/EU, Regulation 443/2009, Regulation 510/2011, EN ISO 5163, ISO 5163, EN ISO 5164, ISO 5164, SAE paper 2012-01-1274, DIN 51756-7, S.A.E. 2012-01-1277, CEN/TR 15993, EN 15492, EN 590, EN 16270, SAE Paper Number: 09SFL-290, SAE Technical Paper 902132, S.A.E. 940478, SAE Automotive Fuels Reference Book, CEN/TR 15367-2, CEN/TR 15367-3, API Technical Report 939-DI, ASTM D4806, EN 858, EN ISO 4259, ISO 4259, EN ISO 20846, ISO 20846, EN ISO 20884, ISO 20884, EN 16135, EN 16136, EN 237, ASTM D2699, ASTM D2700, EN ISO 3675, ISO 3675, EN ISO 12185, ISO 12185, ISO 91-1, EN ISO 7536, ISO 7536, CEN/TS 15293:2011, ASTM D7525, EN ISO 6246, ISO 6246, ASTM D381, EN ISO 2160, ISO 2160, EN 15553, EN ISO 22854, ISO 22854, EN 13132, EN 1601, EN 12177, EN 238, EN 13016-1, ASTM D5191, ASTM D6378, EN ISO 3405, ISO 3405, EN ISO 3170, ISO 3170, EN ISO 3171, ISO 3171, ASTM D7671, ASTM D7667, IP 227, SAE paper 2005-01-3708, API 650
International RelationshipsCEN/TR 16514:2013
DescriptorsGasoline, Motor vehicles, Unleaded gasoline, Automotive fuels, Liquid fuels, Fuels, Petrol engines, Internal combustion engines, Fuel pumps, Marking, Grades (quality), Chemical properties, Octane number, Physical properties of materials, Volatility, Antiknock ratings, Test methods
Title in FrenchCarburants pour automobiles. Essence sans plomb contenant plus de 3,7 % (m/m) d'oxygène. Feuille de route, méthodes d'essai et exigences pour les essences E10+
Title in GermanKraftstoffe für Kraftfahrzeuge. Unverbleiter Ottokraftstoff mit höheren Gehalten an Oxygenaten als 3,7 % (m/m). Roadmap, Prüfverfahren und Anforderungen für E10+ Ottokraftstoff
ISBN978 0 580 81088 6
File Size2.342 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Worldwide Standards
We can source any standard from anywhere in the world