BS EN ISO 2063-2:2017 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys -- Part 2: Conditions for execution of corrosion protection works by thermal spray processes

BS EN ISO 2063-2:2017

Thermal spraying. Zinc, aluminium and their alloys. Execution of corrosion protection systems

Status : Current   Published : October 2017

Format
PDF

Format
HARDCOPY



What is this standard about?

Iron- and steel-based structures are protected from corrosion by protective coatings. A number of different procedures are available to do this. The ISO 2063 series applies to thermal-sprayed metallic coatings of zinc, aluminium or their alloys. This second part of the standard is for manufacturers of corrosion protection systems. It deals with requirements for the execution of the corrosion protection works by thermal spraying in the workshop and on-site.

Who is this standard for?

  • Coating manufacturers
  • Thermal sprayers

Why should you use this standard?

It specifies requirements for corrosion protection of steel structures, components or parts, which are coated by thermal spraying of zinc, aluminium or their alloys.

This part is aimed at coating manufacturers and covers the application of thermal-sprayed zinc, aluminium and their alloys for protection against corrosion in the temperature range between –50 °C to +200 °C. It applies to metallic corrosion protection coatings in the case of new fabrication in the workshop, as well as on-site and for repair on-site after assembly.

It includes:

  • Requirements covering surface preparation, thermal spraying, testing and post treatments, e.g. sealing of the coating
  • Requirements for coating thickness, minimum adhesive strength and surface conditions, specified in a coating specification
  • Recommendations for suitable process steps and quality assurance measures for new production and maintenance and for supervising of corrosion protection works
  • Requirements for the equipment, the working place and the qualification of the spray and testing personnel


NOTE: Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of this document.

What’s changed since the last update?

BS EN ISO 2063:2005 has been split into two parts. This has created the opportunity to add elements that had been in ISO 14713 but were taken out of that standard when it was revised in 2009, specifically: reference to aluminium coatings; recommended design considerations for thermal spraying; and spray process related instructions. 

Part 1 of BS EN ISO 2063 now addresses design and planning engineering while this part, Part 2, is targeted at manufacturers and specifies the necessary requirements for adequate and safe manufacture.  




Standard NumberBS EN ISO 2063-2:2017
TitleThermal spraying. Zinc, aluminium and their alloys. Execution of corrosion protection systems
StatusCurrent
Publication Date23 October 2017
Normative References(Required to achieve compliance to this standard)ISO 14918:1998, ISO 8044:2015, ISO 2063-1:2017, ISO 14923:2003, ISO 8501-1:2007, ISO 2178:2016, ISO 4624:2016, ISO 1463:2003, ISO 8503-1:2012, ISO 14916:2017, ISO 14922-1:1999, ISO 14917:2017
Informative References(Provided for Information)ISO 12944-2:1998, EN 1395-7:2007, ISO 8501-3:2006, ISO 8503-4:2012, ISO 12944-6:1998, ISO 19840:2012, ISO 12944-5:2007, ISO 8502-4:2017, CEN/TR 15339-4:2014, EN 15339-2:2007, EN 13507:2010, CEN/TR 15339-6:2014, ISO 2064:1996, ISO 8501-2:1994, ISO 17834:2003, ISO 14919:2015, EN 1395-6:2007, ISO 12944-1:1998, CEN/TR 15339-1:2014, EN 1395-2:2007, ISO 12944-4:1998, ISO 12944-7:1998, ISO 14713-1:2017, ISO 8503-2:2012, CEN/TR 15339-3:2014, ISO 12690:2010, ISO 12679:2011, ISO 11126-4:1993 (R08), ISO 4288:1996, ISO 11126-3:1993(R08), ASTM D61-0, ISO 11126-7:1995 (R08), EN 1395-1:2007, EN 15520:2007, ISO 12944-3:1998, ISO 8502-3:2017, EN 1395-3:2007, ISO 8503-5:2017, ISO 14232-1:2017, ISO 12671:2012, ASTM F1130 - 99(2014), ISO 8503-3:2012, ISO 11124-2:1993 (R08), EN 15648:2009, CEN/TR 15339-5:2014, ISO 11126-10:2000
ReplacesBS EN ISO 2063:2005
International RelationshipsEN ISO 2063-2:2017,ISO 2063-2:2017
Draft Superseded By14/30273520 DC
DescriptorsSpraying (coating), Thickness measurement, Corrosion protection, Cut-through tests, Test equipment, Zinc alloys, Aluminium, Adhesion tests, Testing conditions, Surface treatment, Zinc, Metal coatings, Iron, Aluminium alloys, Protective coatings, Steels, Metal spraying, Thickness, Painting, Sealing processes, Coatings
ICS25.220.20
25.220.40
Title in FrenchProjection thermique. Zinc, aluminium et alliages de ces métaux Exécution des système de protection contre la corrosion
Title in GermanThermisches Spritzen. Zink, Aluminium und ihre Legierungen Ausführung von Korrosionsschutzsystemen
CommitteeSTI/40
ISBN978 0 580 81082 4
PublisherBSI
FormatA4
DeliveryYes
Pages48
File Size1.366 MB
Price£240.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world