BS EN 1012-3:2013 - Compressors and vacuum pumps. Safety requirements. Process compressors

BS EN 1012-3:2013

Compressors and vacuum pumps. Safety requirements. Process compressors

Status : Confirmed, Current   Published : November 2013

Format
PDF

Format
HARDCOPY



This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part of EN 1012 includes under the general term compressor units those machines which comprise: - the compressor; - a drive system including the prime mover; - any component or device supplied which is necessary for operation. This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN. The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site. Excluded are: - refrigerant compressors used in refrigerating systems or heat pumps for which the safety requirements are given in EN 60335-2-34 or EN 12693; - the specification of performance levels and/or safety integrity levels for safety related parts of control systems. Performance levels and/or safety integrity levels are an important aspect of compressor design and should be determined by the manufacturer and the user based on a risk assessment (see Introduction). This European Standard does not cover those safety aspects of road transport dealt with by EC legislation for trailers.




Standard NumberBS EN 1012-3:2013
TitleCompressors and vacuum pumps. Safety requirements. Process compressors
StatusConfirmed, Current
Publication Date30 November 2013
Confirm Date11 September 2019
Normative References(Required to achieve compliance to this standard)ISO 8573-1, ISO 14122-4, ISO 14122-1, EN 13309, EN ISO 2151:2008, IEC 60417:2002, IEC 60204-1:2005, IEC 61310-2:2007, IEC 61508-5, IEC 61508-2:2010, EN 626-1:1994/A1:2008, IEC 61508-7, EN 837-2, EN 1005-2, IEC 61000-6-2, EN 60079-14, EN ISO 15667, IEC 60079-0:2011, EN ISO 4414:2010, IEC 62061, BS ISO 8573-4:2019, EN 764-7:2002, ISO 3857-1, EN 13155, ISO 8573-4:2019, ISO 8573-2:2018, ISO 14163, ISO 13850:2006, EN 13445-5:2009, EN 60079-1, EN ISO 14122-4, EN ISO 12100:2010, EN 13463-1, ISO 15667, EN 61511-3, IEC 61508-1:2010, EN 61508-2:2010, IEC 61508-6, EN 61508-5, EN 60079-0, EN 61508-3, EN ISO 14122-2, EN 61508-7, EN ISO 11688-1, EN 12195-1, ISO 13849-1:2006, EN 61000-6-4, ISO 15156-1, IEC 61508-4, ISO 12100:2010, ISO 2151:2004, EN ISO 13857, IEC 60079-14, EN 61508-1:2010, ISO 3857-2, EN 60204-1:2006, EN 60204-11, EN 1127-1, EN 61508-4, IEC 61511-3, ISO 14122-2, EN ISO 13849-1:2008, ISO 8573-3, EN ISO 14163, IEC 61511-2, IEC 61000-6-4, ISO 14122-3, ISO 4413:2010, EN ISO 4126-1, EN 61000-6-2, EN 953:1997/A1:2009, ISO 13857, EN ISO 14122-1, EN ISO 15156-1, ISO 4414:2010, IEC 61511-1
Informative References(Provided for Information)2006/42/EC, EN ISO 3266, ISO 13732-1, VDMA 4315-5, ISO 5389, EN ISO 13732-1, EN 837-3, EN ISO 10439, EN 1991, EN 62502, IGC Doc 27/10/E, ISO 7010:2011, EN 614-1, ISO 13849-2, VDMA 4315-8, ISO 3266, EN 547-1, EN ISO 13732-3, EN 1088:1995/A2:2008, EN 349:1993/A1:2008, ISO 4126-9, EN 61078, EN ISO 13849-2, EN 60417-1:1999, VDMA 4315-7, EN 12560, EN 13463-6, ISO 13707, EURO-Chlorine-Recommendation GEST 79/82, NACE MR0103, ISO 16852, EN 61310-1:1995, VDMA 4315-6, ISO 10439, EN 1012-1:2010, ISO 7000, ISO 1217, EN 12693, ISO 13732-3, ISO 3864-1, DIN 4844-2, IEC 61165:2006, NACE MR0175-91, IEC 61511, ISO/TR 11688-2, ISO 21789, IEC 60335-2-34, EN 13861, EN ISO 7010, IEC 62502, EN 12640, EN 13478, IEC 61310-3, VDMA 4315-1, EN 60335-2-34, ISA-TR84.00.02:2002, ANSI/ISA 84.00.01:2004, IEC 60417-1, ISA 91.00.01, DIN 25424-2, EN ISO 16852, EN 1514-1, ISO 10440-1, EN 61165, ISO 3864-4, IEC 61310-1:2007, EN 1998-1, IEC 61078, IGC Doc 123/04/E, EURO-Chlorine-Recommendation GEST 79/81, EN ISO 11688-2, EN 286-1, EN 837-1, EN 1998-4, ISO/TR 23849, EN 13463-5, EN 61310-3
International RelationshipsEN 1012-3:2013
Draft Superseded By13/30273033 DC
DescriptorsRelief valves, Compressors, Instructions for use, Noise control (acoustic), Fire safety, Occupational safety, Signs, Maintenance, Lubricating oils, Installation, Pressure testing, Noise (environmental), Hazards, Safety measures, Fire risks, Design, Lubricating systems, Selection, Fluid equipment, Stability, Equipment safety, Symbols, Failure (mechanical), Leak tests, Electrical safety, Verification, Colour, Safety devices, Oxygen, Explosions, Air compressors, Ergonomics
ICS23.140
23.160
Title in FrenchCompresseurs et pompes à vide. Prescriptions de sécurité. Compresseurs de procédé
Title in GermanKompressoren und Vakuumpumpen. Sicherheitsanforderungen. Prozesskompressoren
CommitteeMCE/8/-/1
ISBN978 0 580 80944 6
PublisherBSI
FormatA4
DeliveryYes
Pages110
File Size2.05 MB
Price£292.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards