BS EN 61534-1:2011+A1:2014 - Powertrack systems. General requirements

BS EN 61534-1:2011+A1:2014

Powertrack systems. General requirements

Status : Current, Work in hand   Published : August 2011

Format
PDF

Format
HARDCOPY



1.1 This part of IEC 61534 specifies general requirements and tests for powertrack (PT) systems with a rated voltage not exceeding 277 V a.c. single phase, or 480 V a.c. two or three phase 50 Hz or 60 Hz with a rated current not exceeding 63 A. These systems are used for distributing electricity in household, commercial and industrial premises.

1.2 Powertrack systems, according to this standard, are intended for use under the following conditions:

  • an ambient temperature in the range —5 °C to + 40 °C, the average value over a 24 h period not exceeding 35 °C;

  • a situation not subject to a source of heat likely to raise temperatures above the limits specified above;

  • an altitude not exceeding 2000 m above sea level;

  • an atmosphere not subject to excessive pollution by smoke, chemical fumes, prolonged periods of high humidity or other abnormal conditions.

In locations where special conditions prevail, as in ships, vehicles and the like and in hazardous locations, for instance, where explosions are liable to occur, special constructions may be necessary.

This standard does not apply to

  • cable trunking systems and cable ducting systems covered by IEC 61084[8]1;

  • busbar trunking systems covered by IEC 60439‑2[5];

  • electrical supply track systems for luminaires covered by IEC 60570[6].




Standard NumberBS EN 61534-1:2011+A1:2014
TitlePowertrack systems. General requirements
StatusCurrent, Work in hand
Publication Date31 August 2011
Normative References(Required to achieve compliance to this standard)EN 61210:2010, EN 60038:2011, EN 60060-1:2010, IEC 60038:2009, EN 60439-2:2000, EN 60999-1:2000, EN 60068-2-52, ISO 2081:2008, IEC 60884-1:2002, HD 60364-4-444:2010, IEC 60127-1:2006, EN ISO 2081:2008, EN 60695-10-2:2003, IEC 60269-1:2006, EN 60999-2:2003, IEC 60112:2003, EN 60695-11-2:2003, EN 60998-2-3:2004, EN 60998-1:2004, EN 60695-2-11:2001, IEC 60884-1:2002/AMD 1:2006, EN 60529:1991, ISO 2093:1986, IEC 61032:1997, IEC 60695-11-2:2003, IEC 61210:2010, IEC 60999-2:2003, EN 60068-2-75, EN 60112:2003, EN 60529:1991/Corrigendum:1993, EN 60269-1:2007, IEC 60999-1:1999, IEC 60695-10-2:2003, IEC 60060-1:2010, EN 60127-1:2006, IEC 60695-2-11:2000, EN ISO 1456:2009, IEC 60068-2-75, ISO 1456:2009, EN 60570:2003, IEC 60998-1:2002, IEC 60529:1989, IEC 60417-DB, EN 61032:1998, EN 60664-1:2007, IEC 60998-2-3:2002, IEC 60068-2-52
Informative References(Provided for Information)EN 60998-2-3:2004, IEC 60570:2003, EN 60112:2003, EN 60695-2-11:2001, HD 60364-4-444:2010, IEC 60664-1:2007, EN 60998-1:2004, EN ISO 1456:2009, EN 61032:1998, EN ISO 2081:2008, IEC 60439-2:2000, EN 60038:2011, EN 60570:2003, IEC 60364-4-44:2007, EN 60999-1:2000, EN 60068-2-52, EN 60269-1:2007, EN 60695-10-2:2003, IEC 60050-151:2001, EN 60127-1:2006, IEC 61084, IEC 60050-441:1984, IEC 60050-604:1987, IEC 60050-195:1998, EN 60529:1991, EN 60060-1:2010, EN 60068-2-75, EN 60439-2:2000, EN 60999-2:2003, EN 60529:1991/Corrigendum:1993, EN 60664-1:2007, EN 60695-11-2:2003, EN 61210:2010
ReplacesBS EN 61534-1:2003
International RelationshipsIEC 61534-1:2011/AMD1:2014,EN 61534-1:2011/A1:2014,EN 60601-1-8:2007/corrigendum,EN 60601-1-8:2007
Amended ByAmendment, September 2014
Draft Superseded By13/30271797 DC
DescriptorsHeight, Air pollution, Rated current, Electrical connections, Temperature, Rated voltage, Ambient temperature, Electric power systems, Electrical installations, Electrical components, Electric wiring systems, Electrical equipment, Bus-bars
ICS29.060.10
29.120.10
Title in FrenchSystèmes de conducteurs préfabriqués. Exigences générales
Title in GermanStromschienensysteme. Allgemeine Anforderungen
CommitteePEL/213
ISBN978 0 580 80750 3
PublisherBSI
FormatA4
DeliveryYes
Pages74
File Size1.917 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world