BS EN 16510-1:2018 - Residential solid fuel burning appliances. General requirements and test methods

BS EN 16510-1:2018

Residential solid fuel burning appliances. General requirements and test methods

Status : Current   Published : September 2018

Format
PDF

Format
HARDCOPY



This European Standard is applicable to residential solid fuel burning appliances. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions. Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This European Standard is not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. This European Standard does not cover appliances intended to carry the load of a chimney.




Standard NumberBS EN 16510-1:2018
TitleResidential solid fuel burning appliances. General requirements and test methods
StatusCurrent
Publication Date07 September 2018
Normative References(Required to achieve compliance to this standard)ISO 562:2010, ISO 501:2012, ISO 7-1:1994/Cor 1:2007, ISO 334:2013, ISO 687:2010, ISO 1171:2010, ISO 1928:2009, ISO 609:1996/COR 1:1996, ISO 7-2:2000, EN 303-5:2012, EN 10029:2010, ISO 10849:1996, EN 1563:2011, EN 10025-1:2004, ISO 331:1983, EN 15250, EN 10088-1, EN 13384-2, EN 12828, EN ISO 18125:2017, EN ISO 9606-2, EN 10120, EN ISO 18134-1:2015, EN ISO 9606-1, EN 10028-3, EN 10216-1, EN 60730-1, EN 10088-2, EN 10111, EN 10222-4, EN 14792, EN ISO 16948:2015, EN 10028-2, EN 14793, EN ISO 16994:2016, EN ISO 18122:2015, EN ISO 228-2:2003, EN ISO 228-1:2003, EN ISO 18123:2015, EN 60335-2-102, EN 10027-2, EN 12619, EN 14597, EN 1561:2011, ISO 19579:2006
Informative References(Provided for Information)ISO 17225-3:2014, ISO 17225-5:2014, ISO 17225-2:2014, ISO 17225-4:2014, ISO 17225-6:2014, EN 1856-1:2009, ISO 17225-7:2014, EN 1856-2:2009, ISO 17225-1:2014, EN 13063-3, ISO/TR 25901-3, EN ISO 17225-6:2014, prEN 16510-2-5, EN ISO 4063, EN ISO 17225-4:2014, prEN 16510-2-3, EN ISO 17225-7:2014, EN ISO 17225-2:2014, EN 12809, prEN 16510-2-2, EN ISO 17225-3:2014, EN 15287-2, EN 15287-1, EN 14785, EN ISO 9001, ISO 4063, EN 13240, EN 14989-2, prEN 16510-2-6, prEN 16510-2-4, EN ISO 17225-5:2014, EN ISO 17225-1:2014, CEN/TS 15883:2009, ISO 857-2, ISO 2859 (all parts), EN 12815, prEN 16510-2-1, EN 13384-1, ISO 9001, EN ISO 2553, EN 13229, ISO 2553
ReplacesBS EN 12815:2001+A1:2004, BS EN 13229:2001+A2:2004, BS EN 12809:2001+A1:2004, BS EN 13240:2001+A2:2004
International RelationshipsEN 16510-1:2018
Draft Superseded By13/30271701 DC
DescriptorsSolid-fuelled devices, Heaters, Efficiency, Space-heating systems, Design, Safety measures, Performance testing, Performance, Heating equipment, Instructions for use, Equipment safety, Emission, Marking, Solid fuel heating
ICS01.040.91
91.140.10
97.040.20
97.100.30
Title in FrenchAppareils de chauffage domestiques à combustion solide Exigences générales et méthodes d'essai
Title in GermanHäusliche Feuerstätten für feste Brennstoffe Allgemeine Anforderungen und Prüfverfahren
CommitteeRHE/28
ISBN978 0 580 80745 9
PublisherBSI
FormatA4
DeliveryYes
Pages154
File Size3.127 MB
Price£342.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.