BS EN 60079-30-1:2017 - Explosive atmospheres. Electrical resistance trace heating. General and testing requirements

BS EN 60079-30-1:2017

Explosive atmospheres. Electrical resistance trace heating. General and testing requirements

Status : Current   Published : July 2017

Format
PDF

Format
HARDCOPY



IEC/IEEE 60079-30-1:2015 specifies general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for EPL Ga and Da. This standard covers trace heaters that comprise either factory or field (work-site) assembled units, and which may be series trace heaters, parallel trace heaters, trace heater pads, or trace heater panels that have been assembled and/or terminated in accordance with the manufacturer's instructions. This standard also includes requirements for termination assemblies and control methods used with trace heating systems. The explosive atmospheres referred to in this standard are those defined in IEC 60079-10-1 and IEC 60079-10-2. Annexes D and E outline the application of this standard for those users applying the Division method of area classification. This standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1 (refer to Clause 1 - Scope of the document). Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence. This first edition of IEC/IEEE 60079-30-1 cancels and replaces the first edition of IEC 60079-30-1 published in 2007 and constitutes a technical revision. This edition includes the following significant changes, apart from the general revision and updating of the first edition of IEC 60079-30-1 and harmonization with IEEE Std.515, with respect to the previous edition:


- the inclusion of a minimum temperature impact test;


- the addition of a mechanical procedure in the thermal stability test;


- the inclusion of a thermal performance test to replace the thermal safety requirements;


- the inclusion of a second procedure utilizing a plate fixture for sheath temperature determination;


- the inclusion of an ultraviolet and condensation test;


- the revision and significant expansion of documentation requirements;


- the addition of Annexes covering requirements for Divisions 1 and 2;


- the addition of a table covering the applicability of requirements from IEC 60079-0;


- the addition of an Annex covering trace heater product design verification methodology (formerly located in IEC 60079-30-2);


- the further harmonization of this edition with several national standards. Please refer to the Foreword of the document for the significance of changes between IEC 60079-30-1, Edition 1.0 (2007) and IEC/IEEE 60079-30-1, Edition 1.0 (2015). Keywords: electric surface heating equipment used in explosive atmospheres, equipment protection levels Gb, Gc, Db, and Dc




Standard NumberBS EN 60079-30-1:2017
TitleExplosive atmospheres. Electrical resistance trace heating. General and testing requirements
StatusCurrent
Publication Date31 July 2017
Normative References(Required to achieve compliance to this standard)ISO 4892-1:2016, ASTM D5025 - 12E1, IEC 60079-0:2011, IEC 60695-11-3:2012, IEC 60050-426:2008, ISO 4892-2:2013, ASTM G155 - 13, IEC 60050-151:2001, ISO 4582:2007
Informative References(Provided for Information)ASTM D5207 - 14, IEC 62395-2:2013, IEC 62395-1:2013, IEC 60079-7:2015
ReplacesBS EN 60079-30-1:2007
International RelationshipsEN 60079-30-1:2017,IEC/IEEE 60079-30-1:2015
Draft Superseded By14/30267384 DC
DescriptorsExplosive atmospheres, Electrical equipment, Protected electrical equipment, Electrical safety, Electrical resistance, Heaters, Electric heaters, Trace heating systems, Electric cables, Electrical heating elements, Industrial, Heating equipment, Pipes, Test methods
ICS29.260.20
Title in FrenchAtmosphères explosives Traçage par résistance électrique. Exigences générales et d'essai
Title in GermanExplosionsgefährdeter Bereiche Elektrische Widerstands-Begleitheizungen. Allgemeine Anforderungen und Prüfanforderungen
CommitteeEXL/31
ISBN978 0 580 79820 7
PublisherBSI
FormatA4
DeliveryYes
Pages74
File Size3.577 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 60079-30-2:2017
    Explosive atmospheres Electrical resistance trace heating. Application guide for design, installation and maintenance