BS EN 61048:2006+A1:2016 - Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements

BS EN 61048:2006+A1:2016

Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements

Status : Current   Published : August 2006

Format
PDF

Format
HARDCOPY



This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kVAr, and not less than 0,1 µF, having a rated voltage not exceeding 1 000 V, which are intended for use in discharge lamp circuits operating at 50 Hz or 60 Hz and at altitudes up to 3 000 m.

NOTE

These lamps and associated ballasts are covered by IEC 60081, IEC 60901, IEC 60188, IEC 60192, IEC 60662, and IEC 61167 and by IEC 61347‑2‑8 and IEC 61347‑2‑9, respectively.

It covers capacitors intended for connection in shunt or in series with the lamp circuit or an effective combination of these.

It covers only impregnated or unimpregnated capacitors, having a dielectric of paper, plastic film or a combination of both, either metallized or with metal foil electrodes.

This standard does not cover radio-interference suppressor capacitors the requirements for which are found in IEC 60384‑14.

Tests given in this standard are type tests. Requirements for testing individual capacitors during production are not included.

Particular requirements for built-in capacitors having an insulation equivalent to double or reinforced insulation are given in Annex E.




Standard NumberBS EN 61048:2006+A1:2016
TitleAuxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
StatusCurrent
Publication Date31 August 2006
Normative References(Required to achieve compliance to this standard)IEC 61049:1991, EN 60529:1991, EN 60529/Corrigendum:1993, IEC 60269, IEC 60598-1, EN 60269, IEC 60695-11-5, IEC 60529:1989, EN 60695-2-11:2001, IEC 60695-2-11, EN 60695-11-5:2005, ISO 4046-4:2002, EN 61049:1993, IEC 61049/Corrigendum:1992, EN 60598-1:2004
Informative References(Provided for Information)EN 60662:1993, BS EN 61167:2018, IEC 60410, EN 61347-2-8:2001, EN 61167:1994, IEC 60901, IEC 61347-2-8, EN 60188:2001, EN 60901:1996, IEC 60662, EN 60192:2001, EN 60384-14:2005, IEC 60192, IEC 60068-2-78, EN 61347-2-9:2001, EN 60081:1998, IEC 60188, IEC 61347-2-9, JIS C 4908:1995, IEC 60081, IEC 60384-14, EN 60068-2-78:2001, BS EN 60745-2-14:2009, IEC 61167:2018
International RelationshipsIEC 61048:2006/AMD1:2015,EN 61048:2006/A1:2016
Amended ByAmendment, February 2016
Draft Superseded By12/30263952 DC
DescriptorsCapacitors, High-voltage tests, Marking, Thermal testing, Leak tests, Mechanical testing, Rated voltage, Heating tests, Conformity, Destructive testing, Damp-heat tests, Circuits, Leakage paths, Tracking tests, Clearance distances, Fluorescent lamps, Electric terminals, Electrical testing, Discharge lamps, Lamps, Type testing, Testing conditions, Electrical safety, Tubular lamps
ICS29.140.30
29.140.99
Title in FrenchAppareils auxiliaires pour lampes. Condensateurs destines a etre utilise s dans les circuits de lampes tubulaires a fluorescence et autres lampes a decharge. Prescriptions generales et de securite
Title in GermanGeraete fuer Lampen. Kondensatoren fuer Leuchtstofflampen- und andere Entladungslampenkreise. Allgemeine Anforderungen und Sicherheitsanforderungen
CommitteeCPL/34/3
ISBN978 0 580 79089 8
PublisherBSI
FormatA4
DeliveryYes
Pages44
File Size868 KB
Price£214.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months