BS EN 1870-3:2014 - Safety of woodworking machines. Circular sawing machines. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

BS EN 1870-3:2014

Safety of woodworking machines. Circular sawing machines. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

Status : Confirmed, Current   Published : November 2014

Format
PDF

Format
HARDCOPY



This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

NOTE 1

For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8.

This document does not apply to:

  • machines for cross cutting logs;

  • hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, e.g. bench mounting;

NOTE 2

Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745‑1:2009 together with EN 60745‑2‑5:2010.

  • transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand i.e. maximum mass ≤ 25 kg.

NOTE 3

Transportable motor-operated electric tools are covered by the requirements of EN 61029‑1:2009 together with EN 61029‑2‑9:2009 and EN 61029‑2‑11:2009.

This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as European Standard.




Standard NumberBS EN 1870-3:2014
TitleSafety of woodworking machines. Circular sawing machines. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
StatusConfirmed, Current
Publication Date30 November 2014
Confirm Date09 July 2020
Normative References(Required to achieve compliance to this standard)ISO 11204:2010, ISO 13857:2008, EN 60439-1:1999, ISO 3743-1:2010, ISO 13849-1:2006, EN ISO 13850:2008, EN ISO 3745:2012, EN ISO 13856-2:2013, EN ISO 12100:2010, EN ISO 9614-1:2009, EN 60204-1:2006, ISO 3744:2010, EN ISO 11204:2010, IEC 61496-2:2013, EN ISO 3744:2010, IEC 60529:1989, EN ISO 13857:2008, EN ISO 4871:2009, ISO 4414:2010, IEC 61800-5-2:2007, EN ISO 13849-1:2008, ISO 3745:2012, IEC 61310-1:2007, ISO 3746:2010, EN 61800-5-2:2007, ISO 3743-2:1994, EN 50370-1:2005, EN 847-1:2013, EN 1005-1:2001+A1:2008, EN 894-2:1997+A1:2008, EN 574:1996+A1:2008, ISO 9614-1:1993, EN 894-1:1997+A1:2008, EN 894-3:2000+A1:2008, ISO 7960:1995, EN 50370-2:2003, ISO/TR 11688-1:1995, EN 953:1997+A1:2009, ISO 14118:2000, EN 1870-19:2013, EN 1005-2:2003+A1:2008, EN 614-1:2006+A1:2009, EN 60529:1991, EN 1837:1999+A1:2009, EN 50525-2-21:2011, ISO 13850:2006, EN 1005-4:2005+A1:2008, EN 1005-3:2002+A1:2008, EN 60825-1:2007, ISO 13856-2:2013, IEC 60439-1:1999, ISO 13856-1:2013, EN ISO 3743-1:2010, EN ISO 11202:2010, EN ISO 13856-1:2013, IEC 60825-1:2007, IEC 60439-1:1999/A1:2004, EN ISO
Informative References(Provided for Information)EN 12779:2004+A1:2009, ISO 14163:1998, EN 614-2:2000+A1:2008, ISO/TR 11688-2:1998, EN 1093-9:1998+A1:2008, EN 50525-1:2011, EN 1093-11:2001+A1:2008, 2006/42/EC, ISO 13849-2:2012, EN ISO 14163:1998, ISO 286-2:2010, EN ISO 11688-2:2000, EN ISO 13849-2:2012
ReplacesBS EN 1870-3:2001+A1:2009
International RelationshipsEN 1870-3:2014
Draft Superseded By12/30263881 DC
DescriptorsSawing machines, Cross-cut saws, Equipment safety, Circular saws (machines), Benches, Safety measures, Woodworking machines, Machine tools
ICS25.080.60
79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et à scies circulaires à table de menuisier
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Von oben schneidende Kappsägemaschinen und kombinierte Kapp- und Tischkreissägemaschinen
CommitteeMTE/23
ISBN978 0 580 79079 9
PublisherBSI
FormatA4
DeliveryYes
Pages66
File Size1.46 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world