BS EN 60127-6:2014 - Miniature fuses. Fuse-holders for miniature fuse-links

BS EN 60127-6:2014

Miniature fuses. Fuse-holders for miniature fuse-links

Status : Current, Work in hand   Published : November 2014

Format
PDF

Format
HARDCOPY



This part of IEC 60127 is applicable to fuse-holders for miniature cartridge fuse-links according to IEC 60127‑2 and sub-miniature fuse-links according to IEC 60127‑3 for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors.

Examples of fuse-holder types with different features are given in Table 1.

Table 1
Features of unexposed or exposed fuse-holders

[This table has been removed.]

NOTE

This list is not intended to be comprehensive and fuse-holders which are not listed are not necessarily excluded from the scope.

This part of IEC 60127 applies to fuse-holders with:

  • a maximum rated current of 16 A; and

  • a maximum rated voltage of 1 500 V d.c. or 1 000 V a.c.; and

  • for use up to 2 000 m above sea-level, unless otherwise specified.

The object of this standard is to establish uniform requirements for safety and the assessment of electrical, mechanical, thermal and climatic properties of fuse-holders and the compatibility between fuse-holders and fuse-links.




Standard NumberBS EN 60127-6:2014
TitleMiniature fuses. Fuse-holders for miniature fuse-links
StatusCurrent, Work in hand
Publication Date30 November 2014
Normative References(Required to achieve compliance to this standard)IEC 60664-1:2007, EN 60695-2-13:2010+A1:2014, EN 60068-2-1:2007, IEC 60068-3-4:2001, IEC 60999-1:1999, IEC 60068-2-27:2008, IEC 60068-2-78:2012, EN 60999-1:2000, EN 60529:1991+A1:2000, EN 60068-2-6:2008, EN 60068-2-2:2007, IEC 60068-1:2013, EN 60112:2003+A1:2009, EN 60112:2003, EN 60127-3:1996+A2:2003, EN 60695-2-13:2010, IEC 60068-2-47:2005, EN 60664-1:2007, EN 60127-1:2006+A1:2011, IEC 60127-2:2003, EN 60068-1:2014, EN 61140:2002+A1:2006, IEC 60695-2-13:2010, IEC 60529:1989/AMD1:1999, EN 60695-11-5:2005, EN 61140:2002, EN 60127-2:2003+A2:2010, EN 60127-1:2006, IEC 60068-2-45:1980/AMD1:1993, IEC 60127-3:1988/AMD1:1991, ISO 3:1973, IEC 61140:2001/AMD1:2004, IEC 60112:2003/AMD1:2009, IEC 60127-2:2003/AMD1:2003, EN 60068-2-45:1992, IEC 60068-2-75:1997, EN 60529:1991, IEC 60127-3:1988, IEC 60529:1989/AMD2:2013, IEC 60127-3:1988/AMD2:2002, IEC 60068-2-45:1980, IEC 60127-2:2003/AMD2:2010, IEC 60695-2-12:2010/AMD1:2014, IEC 60695-2-13:2010/AMD1:2014, EN 60127-3:1996+ corr. June:1996, EN 60068-2-20:2008, EN 60127-3:1996, EN 60216-1:2013, IEC 60050, IEC 60529:1989
Informative References(Provided for Information)IEC 60050-212:2010, IEC 60060-1:2010, EN 60060-1:2010, IEC 60050-826:2004, IEC 60050-151:2001, ISO 1302:2002, IEC 60050-212:2010/Amendment 1:2000, IEC 60060-3:2006, IEC 60364-4-44:2007, HD 60364-4-444:2010, EN ISO 1302:2002, IEC 60050-581:2008, EN 60060-3:2006, IEC 60050-441:1984, HD 60364-4-442:2012
ReplacesBS EN 60127-6:1994, IEC 60127-6:1994
International RelationshipsEN 60127-6:2014,IEC 60127-6:2014
Draft Superseded By12/30259014 DC
DescriptorsLeakage paths, Endurance testing, Fuse-holders, Type testing, Testing conditions, Electrical insulation, Fuses, Contact resistance, Specimen preparation, Tensile testing, Miniature, Rated voltage, Cartridge fuse-links, Thermal testing, Temperature, Test equipment, Compatibility, Dimensions, Electrical safety, Instructions for use, Impact testing, Electrical measurement, Fuse-links, Design, Impulse-voltage tests, Electrical testing, Electrical protection equipment, Rated current, Withstand voltage, Clearance distances, Corrosion resistance, Seatings, Dielectric-strength tests, Mechanical testing, Marking, Classification systems
ICS29.120.50
Title in FrenchCoupe-circuits miniatures. Ensembles-porteurs pour cartouches de coupe-circuits miniatures
Title in GermanGeräteschutzsicherungen. G-Sicherungshalter für G-Sicherungseinsätze
CommitteePEL/32
ISBN978 0 580 78014 1
PublisherBSI
FormatA4
DeliveryYes
Pages60
File Size1.987 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version