BS EN IEC 60034-23:2019 Rotating electrical machines. Repair, overhaul and reclamation

BS EN IEC 60034-23:2019

Rotating electrical machines. Repair, overhaul and reclamation

Status : Current   Published : March 2019

Format
PDF

Format
HARDCOPY



What is this standard about?

This part of IEC 60034 covers the procedures necessary to ensure the satisfactory repair, overhaul, and reclamation of all types and sizes of rotating electrical machines covered by the IEC 60034 series. The standard creates a generic industry procedure covering common aspects of a complete repair. The scope of work depends on the machine type, rating, condition, and the importance of plant reliability and safety. It includes

  • determining cause of failure, where necessary;
  • determining the extent of repair, as applicable;
  • defining revised performance, operating and ambient conditions, if required;
  • reviewing the original design, and upgrading the specification of the design, if required;
  • proving the quality and performance of the repaired machine, maintaining or improving the rated energy efficiency;
  • ensuring environmental considerations are taken into account.

This document does not supersede the requirements prescribed in IEC 60079-19 or elsewhere concerning the repair and overhaul for machines used in explosive atmospheres.

Machines for special applications such as hermetic, submersible, nuclear, hydrogen cooled machines, military, aviation and traction motors might have additional requirements, which are the subject of agreement between the service facility and user.

This document is not intended to take the place of the original machine manufacturer’s instructions and recommendations.

Re-designs and performance changes requiring machine designer input are beyond the scope of this document.




Standard NumberBS EN IEC 60034-23:2019
TitleRotating electrical machines. Repair, overhaul and reclamation
StatusCurrent
Publication Date27 March 2019
Normative References(Required to achieve compliance to this standard)IEC 60136:1986, IEC 60050-411:1996, IEC 60034-11, IEC 60034 (all parts), EN 60079-19, IEC 60034-6, IEC 60072-2, IEC 60079-19, EN 60034-6, EN 60060-1, EN IEC 60034, EN 60034-11, EN 60034-30-1, IEC TS 60034-30-2, IEC 60034-1, ISO 21940-11, IEC 60060-1
Informative References(Provided for Information)IEC 60034-2-2, EN 60034-12, EN IEC 60034-4-1, EN 60034-15, IEC TS 60034-18-33, EN 60034-18-22, EN 60034-19, EN IEC 60034-27-4, EN 60034-18-32, IEC 60034-3, EN 60034-8, ISO 4287, ISO 4526, IEC 60404-1-1, IEC 60034-4-1, EN 60034-9, EN 60034-18-21, EN 60034-27-3, IEC 60034-12, IEC 60034-18-31, IEC 60034-10, EN ISO 4287, IEC 60034-18-34, EN 60034-2-1, ISO 6158, IEC 60034-2-1, EN ISO 9001, IEC 60034-18-42, IEC 60034-19, EN 60034-18-34, EN IEC 60034-14, IEC TS 60034-27-2, ISO 21940-32, IEC TS 60034-16-3, EN ISO 6158, IEC 60034-18-1, IEC 60034-16-1, IEC 60034-27-3, EN 60034-18-41, EN 60349-1, EN 60034-16-1, EN ISO 4526, IEC 60034-27-1, EN 60034-18-31, IEC 60034-27-4, ANSI/EASA AR100-2015, IEC 60072-1:1991, ISO 21940-12, IEC 60034-7, EN 60034-7, ISO 9001, EN IEC 60034-27-1, IEC 60034-18-41, IEC 60034-5, IEC TS 60034-16-2, EN 60034-2-2, ISO 20816-1, EN 60034-5, EN 60034-18-1, IEC 60034-8, IEC 60034-18-32, ISO 20958, IEC 60034-14, ISO/R 773, EN 60034-3, IEC 60034-18-21, EN 60034-18-42, IEC 60034-18-22, IEC 60349-1, IEC 60034-15, IEC 60034-9
International RelationshipsEN IEC 60034-23:2019,IEC 60034-23:2019
Draft Superseded By15/30256504 DC
DescriptorsElectromagnetic compatibility, Ratings, Temperature rise, Electrical equipment, Dielectric properties, Electromagnetic fields, Dielectric-strength tests, Rated voltage, Windings, Thermal testing, Mathematical calculations, Rotating electric machines, Marking, Electrical tolerances, Performance, Type testing, Earthing, Electric distortion, Short-circuit currents, Selection, Torque, Equipment safety, Electric machines, Testing conditions, Temperature-rise limit, Environment (working), Classification systems, Life (durability)
ICS29.160.01
Title in FrenchMachines électriques tournantes Réparation, révision et remise en état
Title in GermanDrehende elektrische Maschinen Reparatur, Überholung und Sanierung
CommitteePEL/2
ISBN978 0 580 77394 5
PublisherBSI
FormatA4
DeliveryYes
Pages58
File Size1.359 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version