BS EN 848-2:2007+A2:2012 - Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle hand fed/integrated fed routing machines

BS EN 848-2:2007+A2:2012

Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle hand fed/integrated fed routing machines

Status : Current   Published : March 2007



This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate, edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer. This document does not apply to inverted pin routers and radial arm routers (machines where the work piece is fixed and the tool head is manually moved); NC boring machines and NC routing machines; hand-held routers or any adaptation permitting their use in a different mode, e.g. bench mounting; routing machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down. This document is not applicable to single spindle hand fed/integrated fed routing machines which are manufactured before the date of its publication as EN.

Standard NumberBS EN 848-2:2007+A2:2012
TitleSafety of woodworking machines. One side moulding machines with rotating tool. Single spindle hand fed/integrated fed routing machines
Publication Date30 March 2007
Normative References(Required to achieve compliance to this standard)EN 847-1:2005/AMD 1:2007, EN 847-2:2001, EN 847-3:2004, EN 894-1:1997/AMD 1:2008, EN 894-2:1997/AMD 1:2008, EN 894-3:2000/AMD 1:2008, EN 1005-1:2001/AMD 1:2008, EN 1005-2:2003/AMD 1:2008, EN 1005-3:2002/AMD 1:2008, EN 1005-4:2005/AMD 1:2008, EN 1037:1995/AMD 1:2008, EN 1088:1995/AMD 2:2008, EN 1837:1999/AMD 1:2008, EN 50370-1:2005, EN 50370-2:2003, EN 60204-1:2006, IEC 60204-1:2005, EN 60439-1:1999, IEC 60439-1:1999, EN 60529:1991, IEC 60529:1989, EN 61800-5-2:2007, IEC 61800-5-2:2007, EN ISO 3743-1:2010, ISO 3743-1:2010, EN ISO 3743-2:2009, ISO 3743-2:1994, EN ISO 3744:2010, ISO 3744:2010, EN ISO 3745:2009, ISO 3745:2003, EN ISO 3746:2010, ISO 3746:2010, EN ISO 4413:2010, ISO 4413:2010, EN ISO 4414:2010, ISO 4414:2010, EN ISO 4871:2009, ISO 4871:1996, EN ISO 9614-1:2009, ISO 9614-1:1993, EN ISO 11202:2010, ISO 11202:2010, EN ISO 11204:2010, ISO 11204:2010, EN ISO 11688-1:2009, ISO/TR 11688-1:1995, EN ISO 12100:2010, ISO 12100:2010, EN ISO 13849-1:2008, ISO 13849-1:2006, EN ISO 13850:2008, ISO 13850:2006, ISO 7948:1987, ISO 7960:1995, EN 847-1:2005, EN 894-1:1997
Informative References(Provided for Information)EN 614-1:2006, EN 614-2:2000, EN 848-3:2007, EN 1093-9:1998/AMD 1:2008, EN 1093-11:2001/AMD 1:2008, EN 12779:2004/AMD 1:2009, EN 60745-1:2009, ICE 60745-1:2006, EN 60745-2-17:2003, IEC 60745-2-17:2003, EN 60947-4-1:2001, IEC 60947-4-1:2000, EN 60947-5-1:2004, ICE 60947-5-1:2003, EN 61029-1:2000, IEC 61029-1:1990, EN 61029-2-8:2010, IEC 61029-2-8:1995, IEC 61029-2-8:1995/AMD 1:1999, IEC 61029-2-8:1995/AMD 2:2001, EN 61310-1:2008, IEC 61310-1:2007, EN 62061:2005, IEC 62061:2005, EN ISO 11688-2:2000, ISO/TR 11688-2:1998, EN ISO 13849-2:2008, ISO 13849-2:2003, EN ISO 13857:2008, ISO 13857:2008, 2006/42/EC, EN 1093-9:1998, EN 1093-11:2001, EN 12779:2004
International RelationshipsEN 848-2:2007
Amended ByAmendment, June 2010. Amends and replaces BS EN 848-2:2007. Amendment, January 2013. Amends and replaces BS EN 848-2:2007+A1:2009. Corrigendum, January 2013.
Draft Superseded By04/301784 DC09/30178363 DC
DescriptorsWoodworking machines, Machine tools, Woodworking, Moulding equipment, Production equipment, Rotating parts, Rotating electric machines, Hazards, Accident prevention, Occupational safety, Equipment safety, Safety measures, Spindles, Routing machines, Milling cutters, Machine tool components, Control devices, Composition, Stopping, Emergency measures, Velocity, Failure (mechanical), Feeders (materials handling equipment), Braking systems, Performance testing, Testing conditions, Machine guards, Noise (environmental), Acoustic measurement, Tensile strength, Thickness, Handbooks, Marking, Operators (personnel), Training
Title in FrenchSécurité des machines pour le travail du bois. Machines à fraiser sur une face à outil rotatif. Défonceuses monobroches à avance manuelle/mécanisée
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug. Einspindelige Oberfräsmaschinen mit Handvorschub/mechanischem Vorschub
ISBN978 0 580 76831 6
File Size1.547 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Worldwide Standards
We can source any standard from anywhere in the world

Develop a PAS

Develop a fast-track standardization document in 9-12 months