BS EN 1807-1:2013 - Safety of woodworking machines. Band sawing machines. Table band saws and band re-saws

BS EN 1807-1:2013

Safety of woodworking machines. Band sawing machines. Table band saws and band re-saws

Status : Current   Published : April 2013



This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines designed to cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood. This European Standard does not apply to: a) Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; NOTE 1 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011. b) hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009. c) log band saws. NOTE 3 Log sawing machines are covered by EN 1807-2. This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine. This European Standard is not applicable to machines manufactured before the date of its publication as EN. NOTE 4 Machines covered by this document are listed under 4 of Annex IV of the Machinery Directive.

Standard NumberBS EN 1807-1:2013
TitleSafety of woodworking machines. Band sawing machines. Table band saws and band re-saws
Publication Date30 April 2013
Normative References(Required to achieve compliance to this standard)EN ISO 3745:2012, ISO 13849-1:2006, IEC 60529:1989, EN ISO 3744:2010, ISO 13857:2008, ISO 11204:2010, EN ISO 4871:2009, EN ISO 11204:2010, EN ISO 4414:2010, EN 894-2:1997+A1:2008, EN 60529:1991, EN 1088:1995+A2:2008, EN 1005-2:2003+A1:2008, EN 1760-1:1997+A1:2009, ISO 1940-1:1986, EN 50370-1:2005, EN 1005-4:2005+A1:2008, ISO 13850:2006, EN 1760-2:2001+A1:2009, EN 1005-3:2002+A1:2008, EN 50370-2:2003, EN 894-1:1997+A1:2008, EN 894-3:2000+A1:2008, ISO/TR 11688-1:1995, ISO 4871:1996, EN 1037:1995+A1:2008, ISO 9614-1:1993, ISO 7960:1995, EN 614-1:2006+A1:2009, ISO 3743-2:1994, EN 1005-1:2001+A1:2008, IEC 61800-5-2:2007, EN 61800-5-2:2007, EN ISO 4413:2010, CLC/TS 61496-2:2006, EN 60825-1:2007, EN ISO 12100:2010, EN ISO 13849-1:2008, EN ISO 3743-2:2009, EN ISO 13850:2008, IEC 61496-2:2006, EN ISO 3743-1:2010, EN ISO 3746:2010, ISO 12100:2010, IEC 60204-1:2005, ISO 4413:2010, EN 60204-1:2006, EN 60439-1:1999, ISO 11202:2010, ISO 3745:2012, IEC 60439-1:1999, EN 61310-1:2008, IEC 60825-1:2007, EN ISO 11688-1:2009, ISO 3744:2010, HD 22.4 S4:2004, EN ISO 13857:2008, EN ISO 9
Informative References(Provided for Information)IEC 60745-2-20:2003+A1:2008, EN 61029-2-5:2011, IEC 61508- 2:2010, EN 61496-1:2004, IEC 61029-2-5:1993+A1:2001, EN 60947-4-1:2001, ISO 13849-2:2012, EN ISO 13849-2:2012, IEC 60947-5-1:2003, EN 61508-2:2010, IEC 61508-1:2010, IEC 61496-1:2004, 2006/42/EC, EN 61029-1:2009, EN 61508-1:2010, EN 60745-1:2009, EN 60745-2-20:2009, IEC 60947-4-1:2000, EN 60947-5-1:2004, IEC 60745-1:2006, EN ISO 11688-2:2000, EN 12779:2004+A1:2009, EN 50178:1997, IEC 61029-1:1990, EN 50525-1:2011, ISO/TR 11688-2:1998, EN 1093-11:2001+A1:2008, EN 614-2:2000+A1:2008, EN 1093-9:1998+A1:2008, EN 349:1993+A1:2008
ReplacesBS EN 1807:1999+A1:2009
International RelationshipsEN 1807-1:2013
Draft Superseded By12/30253907 DC
DescriptorsPerformance testing, Safety devices, Testing conditions, Vertical, Handbooks, Electrical equipment, Mechanical testing, Warning devices, Acoustic measurement, Marking, Control devices, Terminology, Noise control (acoustic), Ergonomics, Electrical safety, Vibration hazards, Design, Pneumatic equipment, Reports, Maintenance, Band saws, Components, Woodworking machines, Hazards, Instructions for use, Safety measures, Occupational safety, Protective barriers, Position, Access, Test equipment, Equipment safety, Hydraulic equipment, Test specimens, Sawing machines
Title in FrenchSécurité des machines pour le travail du bois - Machines à scier à ruban. Scies à table et scies à refendre
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Bandsägemaschinen. Tischbandsägemaschinen und Trennbandsägemaschinen
ISBN978 0 580 76810 1
File Size1.024 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Worldwide Standards
We can source any standard from anywhere in the world

Develop a PAS

Develop a fast-track standardization document in 9-12 months