BS EN 61800-2:2015 - Adjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems

BS EN 61800-2:2015

Adjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems

Status : Current, Work in hand   Published : October 2015

Format
PDF

Format
HARDCOPY



IEC 61800-2:2015 applies to adjustable speed electric a.c. power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the a.c. motors. It applies to adjustable speed electric power drive systems intended to feed a.c. motors from a BDM connected to line-to-line voltages up to and including 1 kV a.c. 50 Hz or 60 Hz and/or voltages up to and including 1,5 kV d.c. input side.


NOTE 1 Adjustable speed electric a.c. power drive systems intended to feed a.c. motors, and with rated converter input voltages above 1 000 V a.c. are covered by IEC 61800-4.


NOTE 2 Adjustable speed electric d.c. power drive systems intended to feed d.c. motors are covered by IEC 61800-1.


NOTE 3 For adjustable speed electric a.c. power drive systems having series-connected electronic power converter sections, the line-to-line voltage is the sum of the series connected input voltages.


Traction applications and electric vehicles are excluded from the scope of this standard. IEC 61800-2:2015 is intended to define the following aspects of an a.c. power drive system (PDS):


- principal parts of the PDS;


- ratings and performance;


- specifications for the environment in which the PDS is intended to be installed and operated;


- other specifications which might be applicable when specifying a complete PDS.


This standard provides minimum requirements, which may be used for the development of a specification between customer and manufacturer. This edition includes the following significant technical changes with respect to the previous edition.


a) Clause 1 (Scope) has been updated,


b) Clause 2 (Normative references) has been updated,


c) Clause 3 (Definitions) has been updated including fundamental definitions to be used across the IEC 61800 series of standards,


d) Clause 4 has been updated with respect to:


1) description of the basic topology for BDM/CDM/PDS (4.2);


2) ratings and performance (4.3 and 4.4);


3) reference to applicable standards within the IEC 61800 series with respect to EMC (IEC 61800-3), Electrical safety (IEC 61800-5-1), Functional safety (IEC 61800-5-2), Load duty aspects (IEC TR 61800-6), Communication profiles (IEC 61800-7 series) and Power interface voltage (IEC TS 61800-8) to avoid conflicting requirements (4.5, 4.6, 4.7, 4.10, 4.11, 4.12);


4) update of requirement for ECO design (4.8);


5) update of requirement for environmental evaluation (4.9);


6) implementation of requirement for explosive atmosphere (4.13).


e) Clause 5 has been updated with test requirement in order to provide a clear link between design requirement and test requirement.


f) Clause 6 has been updated to harmonize the marking and documentation requirement within the IEC 61800 series.


g) Existing Annexes A to G have been deleted and replaced with new Annexes A to C.




Standard NumberBS EN 61800-2:2015
TitleAdjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems
StatusCurrent, Work in hand
Publication Date31 October 2015
Normative References(Required to achieve compliance to this standard)EN 61800-5-1:2007, EN 61800-3, IEC 61800-3, IEC 61800-7-1, EN 60068, IEC 60079, EN 60721-3-1:1997, IEC 60529, EN 60068-2-27:2009, EN 60068-2-52:1996, IEC 60146-1-1, IEC 60068-2-2:2007, EN 60079, EN 60038, IEC 60038, IEC 60034-9, IEC 61800-7, EN 60068-2-78:2013, EN 60721-3-3:1995, EN 61800-5-2:2007, EN 60034-9, EN 61800-7-1, EN 60721-3-3:1995+A2:1997, EN 60068-2-2:2007, IEC 60664-1, IEC 61800-5-2:2007, IEC/TR 60146-1-2, IEC 60721-3-4:1995, IEC 60721-3-1:1997, IEC 61800-5-1:2007, IEC 60068-2-52:1996, IEC 60068-2-68:1994, IEC 60721-3-2:1997, EN 61800-7, EN 60721-3-4:1995, IEC 60721-3-3:1994, IEC/TR 61800-6, IEC 60721-3-3:1994/A2:1996, EN 60721-3-4:1995+A1:1997, IEC 60068-2-78:2012, EN 60146-1-1, EN 60068-2-68:1996, CLC/TR 61800-6, IEC 60068, IEC 60721-3-3:1994/A1:1995, EN 60529, IEC 60050, IEC 60068-2-6:2007, IEC 60068-2-27:2008, EN 60721-3-2:1997, IEC 60721-3-4:1995/A1:1996, EN 60664-1, EN 60068-2-6:2008
Informative References(Provided for Information)IEC 60034-1, EN 60204-1, IEC 61131-2, IEC TS 61800-8, IEC 61158-1, HD 60364, EN 60034-1, EN 61158-2, IEC 60204-1, ANSI/AHRI 1211, EN 61158, EN 50325-4, IEC 61378-1, IEC 61158-2, IEC 61800-1, IEC 61378-3, IEC 61800-4, EN 61131-2, EN 61439-1, EN 50598-2, IEC 60027-3, IEC 61439-1, EN 50495, EN 61158-1, IEC 61158, CSA C838-13, EN 60027-3, EN 61800-1, IEC 60721-2-6, IEC 60364, EN 61800-4, EN 50598-3, IEC TS 62578, EN 61378-1
ReplacesBS EN 61800-2:1998, IEC 61800-2:1998
International RelationshipsEN 61800-2:2015,IEC 61800-2:2015
Draft Superseded By13/30248785 DC
DescriptorsLabels, Efficiency, Transient voltages, Cooling equipment, Torque, Dynamic testing, Electric load, Classification systems, Transformers, Installation, Electrical protection equipment, Performance testing, Ratings, Storage, Wave properties and phenomena, Electrical braking, Electric control equipment, Transportation, Alternating current, Voltage, Safety devices, Standard deviation, Control equipment, Control systems, Control samples, Protected electrical equipment, Overload (electric), Response time, Consumer-supplier relations, Harmonics, Life (durability), Environment (working), Torsional strength, Alternating-current motors, Frequencies, Low-voltage equipment, Electrical equipment, Noise (environmental), Accuracy, Electrical faults, Electrical transmission systems, Performance, Testing conditions, Safety measures, Rated current, Velocity, Approval testing, Climate, Earthing, Switchgear, Vibration, Instructions for use, Waveforms, Power losses, Electric convertors, Electric motors, Alarm systems, Adjustment, Mechanical shock, Electrical testing, Electric reactors, Topology, Marking, Power transmission systems, Selection, Electric power systems, Rated voltage
ICS29.160.30
29.200
Title in FrenchEntraînements électriques de puissance à vitesse variable. Exigences générales. Spécifications de dimensionnement pour systèmes d'entraînement de puissance à vitesse variable en courant alternatif et basse tension
Title in GermanDrehzahlveränderbare elektrische Antriebe. Allgemeine Anforderungen. Festlegungen für die Bemessung von Niederspannungs-Wechselstrom-Antriebssystemen mit einstellbarer Frequenz
CommitteePEL/22
ISBN978 0 580 75848 5
PublisherBSI
FormatA4
DeliveryYes
Pages98
File Size1.363 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version