BS EN 415-10:2014 - Safety of packaging machines. General Requirements

BS EN 415-10:2014

Safety of packaging machines. General Requirements

Status : Current, Project Underway   Published : January 2014



This European Standard gives general requirements for packaging machines which are defined in the scope of EN 415 1 or are in the scope of another relevant machine specific part of EN 415. When used together with a relevant machine specific part of EN 415, it gives the requirements for that specific type of machine. This document deals with safety requirements and their verification for design, construction, installation, commissioning, operation, adjustment, maintenance and cleaning of packaging machines when used as intended and under the conditions of misuse foreseeable by a manufacturer. The extent to which hazards, hazardous situations and events are covered is indicated in Clause 4. The hazards on a specific machine can vary depending on its working principle; the type, size and mass of the product; the packaging material; auxiliary equipment attached to the machine and the environment in which the machine is used. If the machine presents hazards that are not dealt with in this standard, the manufacturer should assess these hazards by using the principles detailed in EN ISO 12100:2010. Such deviations or additions are outside the scope of this standard. Exclusions This European Standard is not applicable to the following: - machines that were manufactured before the date of publication of this document by CEN. This standard does not consider the following: - the risk resulting from the use of machines in public accessed areas. NOTE For machines used in public accessed areas different or additional requirements can apply. It is the responsibility of the manufacturer to identify such additional risks, which are outside the scope of this standard or such deviating risks which arise from this specific use, and provide suitable protective measures in accordance with EN ISO 12100. - the use of packaging machines in potentially explosive atmospheres; - specific health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject; - hazards that may be associated with decommissioning packaging machines.

Standard NumberBS EN 415-10:2014
TitleSafety of packaging machines. General Requirements
StatusCurrent, Project Underway
Publication Date31 January 2014
Normative References(Required to achieve compliance to this standard)EN 1037, EN 619, EN 626-2, IEC 61310-3:2007, IEC 60529:1989, ISO 4414:2010, IEC/TS 61496-3, EN ISO 14119:2013, ISO 3864-1, ISO 14122-1:2001, ISO 13857:2008, EN ISO 12100:2010, EN 61496-1:2004+A1:2008, IEC 60204-1:2005, ISO 13732-3:2005, ISO 4413:2010, EN 415-9, EN 61800-5-2:2007, EN 618, EN 349, ISO 14122-2, EN 60825-1:2007, EN ISO 4414:2010, EN 415-1, ISO 12100:2010, EN 626-1:1994+A1:2008, EN 60529:1991, EN 1672-2:2005+A1:2009, EN ISO 11553-1:2008, ISO 3864-2:2016, ISO 3864-3, EN 1837, EN ISO 13856-2, EN ISO 13732-1:2008, IEC 60825-1:2007, ISO 13850, IEC 61496-1:2004, EN ISO 14122-3, EN ISO 13856-1, EN ISO 14122-1:2001, EN 614-2, CLC/TS 61496-2, CLC/TS 61496-3, EN 1005-3, ISO 13856-1, EN 13478, EN 60947-5-5, EN ISO 14122-2, ISO 3864-2, ISO 13856-2, ISO 14122-3, ISO 13855:2010, EN ISO 7010, EN 1005-4, EN 12198-3, EN ISO 4413:2010, EN ISO 13732-3:2008, ISO 14119:2013, EN 60204-1:2006, EN ISO 13850, EN 1005-2, ISO 13732-1:2006, ISO 13849-1:2006, EN 12198-2, IEC 60947-5-5, ISO 11553-1:2005, EN 614-1, EN ISO 13857:2008, EN ISO 13849-1:2008, EN 61310-3, IEC/TS 61496-2, EN ISO 13855:2
Informative References(Provided for Information)EN 61000-6-4:2007, EN ISO 7731:2008, IEC 61508-1:2010, EN 61000-6-1:2007, EN 61508-1:2010, IEC 60947-5-1:2003, EN ISO 11688-1:2009, EN 61508-3:2010, EN ISO 11200:2009, IEC 61508-3:2010, EN 61508-2:2010, EN 60947-5-1:2004, ISO 11201:2010, ISO 7731:2003, ISO 13849-2:2012, EN ISO 9614-2:1996, IEC 61508-2:2010, IEC 61000-6-2:2005, ISO 9614-2:1996, EN 13463-1:2009, EN 842:1996+A1:2008, EN 894-1:1997+A1:2008, ISO 12001:1996, EN 894-3:2000+A1:2008, EN 14491:2012, EN 1005-5:2007, EN 894-2:1997+A1:2008, IEC 61310-2:1995, ISO 4871:1996, EN 14373:2005, EN 1127-1:2011, ISO 14163:1998, ISO 15667:2000, ISO 11203:1995, ISO/TR 11688-1:1995, EN 61000-6-2:2005, EN ISO 15667:2000, IEC 82079-1, EN 61000-6-3:2007, EN ISO 12001:2009, EN 61310-2:2008, EN ISO 3746:2010, EN ISO 11203:2009, ISO 11200:1995/CORR1:1997, ISO 11204:2010, IEC 60079-0:2007, EN ISO 11202:2010, EN 60079-0:2009, ISO 13856-3:2013, EN ISO 11204:2010, IEC/TS 62046:2008, EN ISO 11161:2007, ISO 3744:2010, ISO 3746:2010, CLC/TS 62046:2008, IEC 61000-6-4:2006, EN ISO 13856-3:2013, EN 82079-1, EN ISO 3744:2010, EN ISO 13849-2:
International RelationshipsEN 415-10:2014
Draft Superseded By11/30247811 DC
DescriptorsTesting conditions, Acoustic measurement, Materials handling, Machine noise, Sound intensity, Work stations, Equipment safety, Packaging, Packaging machines, Safety measures, Occupational safety
Title in FrenchSécurité des machines d'emballage. Prescriptions générales
Title in GermanSicherheit von Verpackungsmaschinen. Allgemeine Anforderungen
ISBN978 0 580 75636 8
File Size2.997 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Access, view and download standards with multiple user access, across multiple sites with BSOL

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Customers who bought this product also bought

  • BS EN 415-1:2014
    Safety of packaging machines Terminology and classification of packaging machines and associated equipment