BS EN ISO 1101:2013 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out

BS EN ISO 1101:2013

Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out

Status : Revised, Superseded, Withdrawn   Published : May 2013 Replaced By : BS EN ISO 1101:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN ISO 1101:2013 is an international standard is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638).

It influences chain links 1, 2 and 3 of the chain of standards on form, orientation, location and run out, and chain link 1 of the chain of standards on datums.

The ISO GPS Master plan given in ISO/TR 14638 gives an overview of the ISO GPS system of which this document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document.

The default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise stated.

Content of BS EN ISO 1101:2013 include:

Scope
Normative references
Terms and definitions
Basic concepts
Symbols
Tolerance frame
Toleranced features
Tolerance zones
Datums
Supplementary indications
Theoretically exact dimensions (TED)
Restrictive specifications
Projected tolerance zone
Free state condition
Interrelationship of geometrical tolerances
Intersection planes
Orientation planes
Definitions of geometrical tolerances




Standard NumberBS EN ISO 1101:2013
TitleGeometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
StatusRevised, Superseded, Withdrawn
Publication Date31 May 2013
Withdrawn Date28 February 2017
Normative References(Required to achieve compliance to this standard)ISO 1660:1987, ISO 14660-2:1999, ISO 14660-1:1999, ISO 12781-1:2011, ISO 12781-2:2011, ISO 10579:2010, ISO 17450-2, ISO 5458:1998, ISO 12780-2:2011, ISO 12180-2:2011, ISO 2692:2006, ISO 12780-1:2011, ISO 128-24:1999, ISO 5459:2011, ISO 12181-2:2011, ISO 8015:2011, ISO 12181-1:2011, ISO 12180-1:2011
Informative References(Provided for Information)ISO 129, ISO 81714-1, ISO 16792, ISO/TR 5460:1985, ISO 3098-0, ISO 128, ISO/TR 14638:1995, ISO 3098-5, ISO 3098-2:2000, ISO 7083:1983, ISO 3040:1990
Replaced ByBS EN ISO 1101:2017
ReplacesBS ISO 10578:1992, BS EN ISO 1101:2005
International RelationshipsISO 1101:2012/Cor 1:2013,ISO 1101:2012,EN ISO 1101:2013
DescriptorsOrientation, Geometry, Drawings, Tolerances (measurement), Engineering drawings, Form tolerances, Tolerances of position, Technical drawing, Graphic representation, Graphic symbols, Symbols, Dimensional tolerances
ICS01.100.20
17.040.10
17.040.40
Title in FrenchSpécification géométrique des produits (GPS). Tolérancement géométrique. Tolérancement de forme, orientation, position et battement
Title in GermanGeometrische Produktspezifikation (GPS). Geometrische Tolerierung. Tolerierung von Form, Richtung, Ort und Lauf
CommitteeTPR/1
ISBN978 0 580 75107 3
PublisherBSI
FormatA4
DeliveryNo
Pages112
File Size3.099 MB
Price£292.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN ISO 8015:2011
    Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
  • BS EN ISO 5459:2011
    Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
  • BS EN ISO 1302:2002
    Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
  • BS EN 22768-1:1993, ISO 2768-1:1989
    General tolerances Tolerances for linear and angular dimensions without individual tolerance indications