BS EN 14033-2:2008+A1:2011 - Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working

BS EN 14033-2:2008+A1:2011

Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working

Status : Superseded, Withdrawn   Published : August 2008 Replaced By : BS EN 14033-2:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


1.1 General This European Standard defines the specific technical railway requirements for working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1. This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M. Additional requirements can apply for working on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures. This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels and underground infrastructures. This European Standard covers the safety requirements for the railway specific problems for working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex J is included for information. In all cases an authorisation to work is required to access the infrastructure. This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation. This European Standard does not apply to - the requirements with regard to the quality of work, including the related measuring methods, and the performance of the machine; ) - the specific requirements established by each railway infrastructure manager for the use of machines which will be the subject of negotiation between the manufacturer and the infrastructure manager. This European Standard does not deal with the following additional requirements: - working methods; - operation in severe working conditions requiring special measures (e.g. work in tunnels or in cuttings, extreme environmental conditions such as freezer applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields); - operation subject to special rules (e.g. potentially explosive atmospheres); - hazards due to errors in software; - hazards occurring when used to handle suspended loads which may swing freely; - hazards due to wind pressure greater than normal e.g. pressures caused by the passing of trains at speed in excess of 190 km/h. 1.2 Validity of this European Standard This European Standard applies to all machines, which are ordered after one year from the publication date of this European Standard.




Standard NumberBS EN 14033-2:2008+A1:2011
TitleRailway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
StatusSuperseded, Withdrawn
Publication Date29 August 2008
Withdrawn Date05 July 2017
Normative References(Required to achieve compliance to this standard)EN 14363:2005, EN 12077-2:1998, ISO 12100-2:2003, EN 280, UIC 505-1:2006, ISO 7731:2003, EN 14033-3:2009/AMD 1:2011, EN 791, UIC 505-4:1977, EN 3-7:2004/AMD 1, UIC 702:2003, EN 12999, EN ISO 12100-2, EN ISO 7731, EN 14033-3:2009, ISO 4310, EN 50153:2002, ISO 4305, EN 50122-1, EN 3-7:2004, EN 14033-1:2011
Informative References(Provided for Information)DIN 6164-2:1980, FprEN 15955-2:2011, FprEN 15954-1:2011, NF F 58-002, ERRI (ORE) B55/RP8, DIN 6164-1:1980, GM/RT2180 Issue 3, FprEN 15955-1:2011, FprEN 15954-2:2011, EN 13848-3, EN 15746-2:2010, EN 13977:2011, EN 15746-1:2010
Replaced ByBS EN 14033-2:2017
International RelationshipsEN 14033-2:2008+A1:2011
Amended ByAmendment, February 2012; Corrigendum, March 2009
DescriptorsInstructions for use, Railway maintenance vehicles, Handbooks, Railway track, Maintenance, Railway vehicles, Safety measures, Inspection, Occupational safety, Certificates of conformity, Equipment safety, Verification, Working conditions (physical), Railway fixed equipment, Warning devices, Loading, Materials handling equipment Railway applications
ICS45.120
93.100
Title in FrenchApplications ferroviaires. Voie. Machines de construction et de maintenance empruntant exclusivement les voies ferrées. Prescriptions techniques pour le travail
Title in GermanBahnanwendungen. Oberbau. Schienengebundene Bau- und Instandhaltungsmaschinen. Technische Anforderungen an den Arbeitseinsatz
CommitteeRAE/2
ISBN978 0 580 74952 0
PublisherBSI
FormatA4
DeliveryYes
Pages80
File Size1.218 MB
Price£274.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months