BS EN 1870-10:2013 - Safety of woodworking machines. Circular sawing machines. Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

BS EN 1870-10:2013

Safety of woodworking machines. Circular sawing machines. Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

Status : Confirmed, Current   Published : May 2013



This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single blade automatic and semi-automatic up-cutting cross cut sawing machines with one sawing unit herein after referred to as machines designed to cut solid wood, chip-board, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. For the definition of stationary and displaceable machine see 3.2.4 and 3.2.5. Any work piece positioning equipment fitted to the machine is included in this document. This document does not apply to machines designed for cross cutting logs. This document is not applicable to machines which are manufactured before the date of its publication as EN. NOTE Machines covered by this document are listed under 1.4 of Annex IV of the Machinery Directive.

Standard NumberBS EN 1870-10:2013
TitleSafety of woodworking machines. Circular sawing machines. Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
StatusConfirmed, Current
Publication Date31 May 2013
Confirm Date08 January 2019
Normative References(Required to achieve compliance to this standard)ISO 13857:2008, IEC 61310-1:2007, ISO 4413:2010, EN ISO 4414:2010, ISO 11204:2010, ISO 12100:2010, EN ISO 11204:2010, EN 60439-1:1999, IEC 60439-1:1999, EN 60204-1:2006, EN ISO 4871:2009, IEC 61496-2:2006, EN ISO 3746:2010, EN ISO 11688-1:2009, EN 60825-1:2007, ISO 3745:2012, IEC 60825-1:2007, ISO 3746:2010, IEC 61800-5-2:2007, EN 1005-1:2001+A1:2008, EN 1088:1995+A2:2008, EN 1005-3:2002+A1:2008, EN 1760-1:1997+A1:2009, EN 50370-2:2003, EN 1760-2:2001+A1:2009, ISO 4871:1996, ISO 3743-2:1994, ISO 7960:1995, ISO 9614-1:1993, EN 1005-2:2003+A1:2008, EN 60529:1991, EN 50370-1:2005, EN 1037:1995+A1:2008, ISO/TR 11688-1:1995, EN 894-2:1997+A1:2008, ISO 13850:2006, EN 574:1996+A1:2008, EN 894-3:2000+A1:2008, EN 1005-4:2005+A1:2008, EN 894-1:1997+A1:2008, EN ISO 9614-1:2009, ISO 3743-1:2010, ISO 3744:2010, ISO 13849-1:2006, IEC 60204-1:2005, EN ISO 4413:2010, EN ISO 3743-1:2010, EN ISO 3743-2:2009, EN ISO 11202:2010, EN 61310-1:2008, EN ISO 13849-1:2008, EN ISO 13850:2008, CLC/TS 61496-2:2006, ISO 4414:2010, EN ISO 12100:2010, IEC 60529:1989, EN ISO 3744:2010, EN ISO 3745:
Informative References(Provided for Information)EN 614-1:2006+A1:2009, EN 1093-9:1998+A1:2008, EN 50525-2-21:2011, EN 614-2:2000+A1:2008, EN 1093-11:2001+A1:2008, EN 50525-1:2011, EN 12779:2004+A1:2009, EN 61508-2:2010, EN 61508-7:2010, 2006/42/EC
ReplacesBS EN 1870-10:2003+A1:2009
International RelationshipsEN 1870-10:2013
Draft Superseded By11/30237563 DC
DescriptorsSemi-automatic systems, Electrical safety, Accident prevention, Woodworking machines, Circular saws (machines), Automatic control systems, Hazards, Machine tools, Sawing machines, Occupational safety, Safety measures, Safety engineering, Single, Equipment safety, Instructions for use
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Tronçonneuses monolames automatiques et semi-automatiques à coupe ascendante
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Von unten schneidende automatische und halbautomatische Kappsägemaschinen mit einem Sägeblatt (Untertischkappkreissägemaschinen)
ISBN978 0 580 73575 2
File Size1.241 MB

 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Access, view and download standards with multiple user access, across multiple sites with BSOL

Develop a PAS

Develop a fast-track standardization document in 9-12 months