BS EN 13852-1:2013 - Cranes. Offshore cranes. General-purpose offshore cranes

BS EN 13852-1:2013

Cranes. Offshore cranes. General-purpose offshore cranes

Status : Current   Published : October 2013

Format
PDF

Format
HARDCOPY



This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of - or hazards relating to the following: a) fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane; b) lifting accessories, i.e. any item between the hook and the load; c) minimum design temperature below ?20 °C; d) operations at an ambient temperature above 45 °C; NOTE: For equipment designed for operation in explosive atmospheres, the normal ambient temperature range is ?20 °C to +40 °C, unless otherwise specified and marked. See Annex O and relevant standards indicated for complete information. e) lifting operations involving more than one crane; f) accidental loads due to collisions; g) hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 m; h) emergency rescue operations; (except training) i) subsea lifting operations. The significant hazards covered by this European standard are identified in Clause 4. This European Standard includes requirements for the lifting of personnel by a general-purpose offshore crane.




Standard NumberBS EN 13852-1:2013
TitleCranes. Offshore cranes. General-purpose offshore cranes
StatusCurrent
Publication Date31 October 2013
Normative References(Required to achieve compliance to this standard)EN 614-1:2006+A1:2009, EN 842:1996+A1:2008, EN 953:1997+A1:2009, EN 1127-1:2011, EN 10025-1:2004, EN 10025-2:2004, EN 10025-3:2004, EN 10025-4:2004, EN 10025-5:2004, EN 10025-6:2004+A1:2009, EN 10083-1:2006, EN 10083-2:2006, EN 10204:2004, EN 12077-2:1998+A1:2008, EN 12385-1:2002+A1:2008, EN 12385-2:2002+A1:2008, EN 12385-3:2004+A1:2008, EN 12385-4:2002+A1:2008, EN 12644-1:2001+A1:2008, EN 12644-2:2000+A1:2008, EN 13001-1:2004+A1:2009, EN 13001-2:2011, CEN/TS 13001-3-1:2004, CEN/TS 13001-3-2:2008, CEN/TS 13001-3-5:2010, EN 13135:2013, EN 13411-3:2004+A1:2008, EN 13411-4:2011, EN 13411-6:2004+A1:2008, EN 13411-7:2006+A1:2008, EN 13463-1:2009, EN 13478:2001+A1:2008, EN 13557:2003+A2:2008, EN 13586:2004+A1:2008, EN 14502-1:2010, EN 60079-0:2009, IEC 60079-0:2007+CORR, EN 60079-14:2008, IEC 60079-14:2007, EN 60079-15:2010, IEC 60079-15:2010, EN 60204-32:2008, IEC 60204-32:2008, EN 61000-6-2:2005, IEC 61000-6-2:2005, EN 61000-6-4:2007, IEC 61000-6-4:2006, EN 61508, IEC 61508, EN ISO 898-1:2013, ISO 899-1:2013, EN ISO 3744:2010, ISO 3744:2010, EN ISO 4413:2010, ISO 44
Informative References(Provided for Information)EN 894-3:2000+A1:2008, EN 1005-3:2002+A1:2008, CLC/TR 50404:2003, EN 60079-1:2007, IEC 60079-1:2007, EN 60079-2:2007, IEC 60079-2:2007, EN 60079-5:2007, IEC 60079-5:2007, EN 60079-6:2007, IEC 60079-6:2007, EN 60079-7:2007, IEC 60079-7:2007, EN 60079-10:2003, IEC 60079-10:2002, EN 60079-11:2012, IEC 60079-11:2001, EN 60079-18:2009, IEC 60079-18:2009, EN 60079-25:2010, IEC 60079-25:2010, EN 61310-1:2008, IEC 61310-1:2007, EN 61310-2:2008, IEC 61310-2:2007, EN 61310-3:2008, IEC 61310-3:2007, IEC/TS 60079-32-1:XX, IEC 60079-32-2:XX, ISO 9374-1:1989, ISO 9374-4:1989
ReplacesBS EN 13852-1:2004
International RelationshipsEN 13852-1:2013
Draft Superseded By11/30235009 DC
DescriptorsCranes, Offshore construction works
ICS47.020.40
53.020.20
Title in FrenchAppareils de levage à charge suspendue. Grues off-shore. Grues off-shore pour usage général
Title in GermanKrane. Offshore-Krane. Offshore-Krane für allgemeine Verwendung
CommitteeMHE/3/-/10
ISBN978 0 580 72942 3
PublisherBSI
FormatA4
DeliveryYes
Pages100
File Size1.521 MB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought