BS EN 1870-16:2012 - Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting

BS EN 1870-16:2012

Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting

Status : Confirmed, Current   Published : October 2012

Format
PDF

Format
HARDCOPY



This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of ? 200 mm, fitted or not with pneumatic systems, hereinafter referred to as the machine, designed to cut solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. The requirements of this document apply to stationary and displaceable double mitre saw for V-cutting (see 3.3.3 and 3.3.4). The requirements of this document apply to all machines whatever their method of control, e.g. electromechanical and/or electronic. This document does not apply to transportable mitre saws or any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 1 Transportable motor-operated electric single blade mitre saws are covered by the requirements of EN 61029-1:2009 and EN 61029-2-9:2009. This document is not applicable to double mitre sawing machines for V-cutting fitted with hydraulic system. This document is not applicable to double mitre sawing machines for V-cutting which are manufactured before the date of its publication as EN. NOTE 2 Machines covered by this document are listed under 1.4 of Annex IV of the Machinery Directive.




Standard NumberBS EN 1870-16:2012
TitleSafety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting
StatusConfirmed, Current
Publication Date31 October 2012
Confirm Date16 July 2018
Normative References(Required to achieve compliance to this standard)ISO 4414:2010, EN ISO 3743-2:2009, EN ISO 3744:2010, EN 614-1:2006/AMD 1:2009, ISO 11204:2010, EN 1760-1:1997/AMD 1:2009, ISO 13849-1:2006, EN ISO 13850:2008, EN 894-2:1997/AMD 1:2008, EN 60204-1:2006, EN ISO 4871:2009, EN 1088:1995/AMD 2:2008, EN 1005-2:2003/AMD 1:2008, ISO 3746:2010, CLC/TS 61496-2:2006, EN 1005-1:2001/AMD 1:2008, EN ISO 4414:2010, ISO 3744:2010, EN 894-1:1997/AMD 1:2008, IEC 60529:1989, IEC 60439-1:1999, EN 61310-1:2008, IEC 61310-1:2007, EN ISO 3746:2010, IEC 60204-1:2005, EN 894-1:1997, EN 574:1996, EN 847-1:2005, EN 50370-1:2005, EN 1037:1995, ISO 3743-2:1994, ISO 9614-1:1993, ISO/TR 11688-1:1995, EN 1005-3:2002, EN 894-2:1997, EN 614-2:2000, EN 1005-1:2001, EN 50370-2:2003, ISO 13850:2006, EN 1088:1995, ISO 7960:1995, EN 1760-1:1997, ISO 4871:1996, EN 60529:1991, EN 614-1:2006, EN 1005-2:2003, EN 1005-4:2005, EN 894-3:2000, EN ISO 3745:2009, EN ISO 13849-1:2008, EN ISO 11688-1:2009, ISO 3743-1:2010, EN 60439-1:1999, EN 894-3:2000/AMD 1:2008, EN ISO 9614-1:2009, EN 614-2:2000/AMD 1:2008, IEC 61800-5-2:2007, EN ISO 11204:2010, EN ISO 3743-1:201
Informative References(Provided for Information)EN 12779:2004, IEC 61508-1:1998, EN 1093-9:1998, IEC 61029-2-9:1995, EN 1093-11:2001, IEC 61029-1:1990, EN 12779:2004/AMD 1:2009, IEC 61496-1:2004, EN 61496-1:2004, EN 61029-1:2009, 2006/42/EC, EN 61029-2-9:2009, EN ISO 11688-2:2000, EN 1093-11:2001/AMD 1:2008, EN 61508-1:2001, IEC 61508-1:1998/Corrigendum:1999, ISO TR 11688-2:1998, EN 1093-9:1998/AMD 1:2008
ReplacesBS EN 1870-16:2005+A1:2009
International RelationshipsEN 1870-16:2012
Draft Superseded By10/30232428 DC
DescriptorsElectrical safety, Equipment safety, Safety measures, Machine tools, Woodworking machines, Verification, Hazards, Circular saws (machines), Occupational safety, Sawing machines
ICS79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Tronçonneuses doubles à coupe en V
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Klinkschnittkreissägemaschinen
CommitteeMTE/23
ISBN978 0 580 72428 2
PublisherBSI
FormatA4
DeliveryYes
Pages54
File Size950 KB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version