BS EN 1870-15:2012 - Safety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

BS EN 1870-15:2012

Safety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

Status : Confirmed, Current   Published : October 2012

Format
PDF

Format
HARDCOPY



This European Standard specifies all requirements and/or measures to reduce the hazards and limit the risks on multi-blade cross-cut sawing machines (with minimum two saw unit) with integrated feed of the work-piece and manual loading and/or unloading fitted with a saw blade drive motor for each saw unit, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This document deals with all significant hazards, hazardous situations and events which are relevant to these machines as stated in Clause 4. It does not deal with any hazards relating to the mechanical loading and/or unloading of the work-piece or which result from the combination of the machine with any other. This document does not cover machines designed for climb cutting (see 3.2.10). The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic and/or pneumatic. This document is not applicable to multi-blade cross-cut sawing machines with integrated feed of the work-piece and manual loading and/or unloading which are manufactured before the date of its publication as EN. NOTE Machines covered by this document are listed under 1.3 of Annex IV of the Machinery Directive.




Standard NumberBS EN 1870-15:2012
TitleSafety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
StatusConfirmed, Current
Publication Date31 October 2012
Confirm Date16 July 2018
Normative References(Required to achieve compliance to this standard)EN ISO 13849-1:2008, EN 614-1:2006/AMD 1:2009, EN ISO 9614-1:2009, EN ISO 11688-1:2009, EN ISO 13857:2008, ISO 11202:2010, EN 894-3:2000/AMD 1:2008, ISO 4413:2010, EN 1005-2:2003/AMD 1:2008, EN 60204-1:2006, EN ISO 12100:2010, ISO 12100:2010, ISO 3745:2003, EN ISO 4413:2010, EN 61800-5-2:2007, IEC 61800-5-2:2007, EN 614-2:2000/AMD 1:2008, EN ISO 3743-2:2009, EN ISO 11204:2010, IEC 61310-1:2007, EN 1088:1995/AMD 2:2008, EN ISO 3743-1:2010, EN 894-2:1997/AMD 1:2008, EN ISO 3745:2009, EN 1005-3:2002/AMD 1:2008, EN 1005-1:2001/AMD 1:2008, EN ISO 3744:2010, ISO 3746:2010, IEC 60529:1989, ISO 9614-1:1993, EN 50370-2:2003, EN 614-1:2006, EN 50370-1:2005, EN 1005-2:2003, EN 894-1:1997, EN 1088:1995, EN 1037:1995, EN 1005-4:2005, EN 1837:1999, ISO 4871:1996, EN 847-1:2005, ISO 13850:2006, EN 1005-1:2001, EN 894-3:2000, EN 614-2:2000, EN 1005-3:2002, EN 894-2:1997, ISO/TR 11688-1:1995, ISO 7960:1995, ISO 3743-2:1994, EN 60529:1991, EN 12779:2004, ISO 13849-1:2006, EN 1037:1995/AMD 1:2008, EN 894-1:1997/AMD 1:2008, ISO 3743-1:2010, EN 1837:1999/AMD 1:2009, IEC 60825-1:2007, IS
Informative References(Provided for Information)EN 1093-9:1998, EN 1093-11:2001, EN 1093-11:2001/AMD 1:2008, IEC 60947-5-1:2003, EN 60947-4-1:2001, 2006/42/EC, IEC 60947-4-1:2000, EN 1093-9:1998/AMD 1:2008, EN 60947-5-1:2004
ReplacesBS EN 1870-15:2004+A1:2009
International RelationshipsEN 1870-15:2012
Draft Superseded By10/30232425 DC
DescriptorsBlades, Safety measures, Occupational safety, Sawing machines, Machine tools, Woodworking machines, Hazards, Equipment safety, Circular saws (machines)
ICS79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Machines à scier multi-lames pour tronçonnage à avance mécanisée de la pièce et chargement et/ou déchargement manuels
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Mehrfachablängkreissägemaschinen mit mechanischem Vorschub für das Werkstück und Handbeschickung und/oder Handentnahme
CommitteeMTE/23
ISBN978 0 580 72427 5
PublisherBSI
FormatA4
DeliveryYes
Pages54
File Size1.774 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.