BS EN ISO 28765:2011 - Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN ISO 28765:2011

Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges

Status : Revised, Withdrawn   Published : April 2011 Replaced By : BS EN ISO 28765:2016

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


ISO 28765:2008 establishes the requirements for the design and use of vitreous-enamel-coated bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges. It applies to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation. It applies where the tank is cylindrical and is mounted on a load-bearing base substantially at or above ground level; the product of the tank diameter in metres and the wall height in metres lies within the range 5 to 500; the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m; the stored material has the characteristics of a liquid, exerting a negligible frictional force on the tank wall; the stored material may be undergoing treatment as part of a municipal or industrial effluent treatment process; the internal pressure in the headspace above the liquid does not exceed 50 kPa and the internal partial vacuum above the liquid does not exceed 10 kPa; the walls of the tank are vertical; the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank may have a rise or fall built in to allow complete emptying of the tank contents, the slope of which does not exceed 1:100; there is negligible inertial and impact load due to tank filling; the minimum thickness of the tank shell is 1,5 mm; the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of sheets made from aluminium or stainless steel are outside the scope of this International Standard); the temperature of the tank wall during operation is within the range -50 °C to +100 °C under all operating conditions. This International Standard also gives details of procedures to be followed during installation on site and for inspection and maintenance of the installed tank. It does not apply to chemical-reaction vessels. It does not apply to tanks fitted with floating roofs. It does not cover resistance to fire.




Standard NumberBS EN ISO 28765:2011
TitleVitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
StatusRevised, Withdrawn
Publication Date30 April 2011
Withdrawn Date29 February 2016
Cross ReferencesISO 2178, ISO 2747, ISO 2859-1, ISO 4532, ISO 6370-2, ISO 8289:2000, ISO 15686-1, ISO 28706-1:2008, ISO 28706-2:2008, ISO 28706-3:2008, ISO 28706-4:2008, EN 101, EN 1993-1-6, EN 1993-4-1, EN 1993-4-2, EN 1998-4, EN 10209:1996, EN 14430:2004, ANSI/AWWA D 103-97, ISO 9001, EN 10111, EN 10149-1, ASTM A 1011, Uniform Building Code 1997, EN 1991-4, ISO 4528, BS 5502-22, BS 5502-50, BS 5395-3, BS 6399-2, BS 6399-3, BS 7793-1, BS 7793-2, BS 7885, DIN 4119-2, UK Water Industry Specification WIS 4-25-01, EN 1998-1, International Building Code
Replaced ByBS EN ISO 28765:2016
ReplacesBS EN 15282:2007
International RelationshipsEN ISO 28765:2011,ISO 28765:2008
Draft Superseded By10/30232007 DC
DescriptorsVitreous enamel, Ceramic coatings, Protective coatings, Coatings, Tanks (containers), Bulk storage containers, Water storage, Water treatment, Sewage treatment, Effluents (sewage), Industrial water pollutants, Trade effluents, Steels, Cylindrical shape, Structural design, Installation, Inspection
ICS13.060.01
23.020.10
25.220.50
Title in FrenchÉmaux vitrifiés. Conception de réservoirs en acier boulonnés pour le stockage ou le traitement des eaux ou des effluents d'eaux usées urbains ou industriels
Title in GermanEmails und Emaillierungen. Gestaltung von verschraubten Stahlbehältern für die Speicherung oder Behandlung von Wasser oder kommunalen und industriellen Abwässern und Abwasserschlamm
CommitteeSTI/36
ISBN978 0 580 72288 2
PublisherBSI
FormatA4
DeliveryNo
Pages36
File Size701 KB
Price£206.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world