BS EN 1870-14:2007+A2:2012 - Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines

BS EN 1870-14:2007+A2:2012

Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines

Status : Current, Under review   Published : March 2008

Format
PDF

Format
HARDCOPY



This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with: - the facility for scoring; - an angle cutting device; - a middle support device; - a programmable stop for parallel vertical cuts; - the facility for grooving with a width of at most 20 mm in one pass by using a milling tools, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. The machines are designed for cutting panels of the following materials: a) wood based materials such as chipboard, fibreboard, plywood and also these materials where they are covered with plastic / light alloy laminates; b) solid wood; c) hardened rubber and hardened plastic material; d) non ferrous materials e.g. light alloy; e) compound materials with core consisting of polyurethane or mineral material laminated with light alloy. This European Standard does not apply to vertical panel saws with pressure beam and saw unit mounted behind the workpiece support. This European Standard does not deal with hazards relating to the combination of a single machine being used with any other machine (as part of a line). This European Standard is not applicable to vertical panel saws which are manufactured before the date of its publication as EN. NOTE Machines covered by this standard are listed under A.1.4 of Annex IV of the Machinery Directive.




Standard NumberBS EN 1870-14:2007+A2:2012
TitleSafety of woodworking machines. Circular sawing machines. Vertical panel sawing machines
StatusCurrent, Under review
Publication Date31 March 2008
Normative References(Required to achieve compliance to this standard)ISO 3746:2010, EN 894-3:2000/AMD 1:2008, EN 847-1:2005/AMD 1:2007, EN 61310-1:2008, EN ISO 13850:2008, EN 1005-2:2003/AMD 1:2008, EN ISO 12100:2010, EN ISO 11688-1:2009, IEC 60204-1:2005, EN ISO 3744:2010, EN 1037:1995/AMD 1:2008, EN ISO 13849-1:2008, ISO 3744:2010, EN ISO 11204:2010, ISO 11202:2010, EN 894-1:1997/AMD 1:2008, EN 1005-4:2005/AMD 1:2008, EN 1005-3:2002/AMD 1:2008, ISO 3745:2003, EN ISO 11202:2010, EN ISO 9614-1:2009, ISO 3743-1:2010, IEC 60529:1989, EN 894-2:1997, EN 50178:1997, EN 50370-1:2005, ISO 13850:2006, EN 1088:1995, ISO 4871:1996, EN 1037:1995, EN 1005-4:2005, EN 847-1:2005, ISO 3743-2:1994, ISO 7960:1995, EN 1005-1:2001, ISO/TR 11688-1:1995, EN 60529:1991, EN 1005-2:2003, ISO 9614-1:1993, EN 50370-2:2003, EN 894-3:2000, EN 1005-3:2002, EN 894-1:1997, EN 61496-1:2004, EN ISO 3743-1:2010, ISO 13849-1:2006, EN 60204-1:2006, EN 1088:1995/AMD 2:2008, IEC 61496-1:2004, EN ISO 4414:2010, EN 1005-1:2001/AMD 1:2008, IEC 61310-1:2007, EN ISO 13857:2008, EN ISO 3743-2:2009, EN 60439-1:1999, EN ISO 13849-2:2008, ISO 12100:2010, IEC 60439-1:1999, EN 894-
Informative References(Provided for Information)EN 1093-11:2001, EN 1093-9:1998, EN 614-2:2000, EN 614-1:2006, EN 12779:2004, EN 1050:1996, ISO/TR 11688-2:2001, EN 614-1:2006/AMD 1:2009, EN 12779:2004/AMD 1:2009, EN 1093-11:2001/AMD 1:2008, EN 614-2:2000/AMD 1:2008, EN 60947-4-1:2001, EN 1093-9:1998/AMD 1:2008, HD 21.1 S4:2002, IEC 60947-5-1:2003, EN 60947-5-1:2004, EN ISO 11688-2:2000, IEC 60947-4-1:2000, 2006/42/EC, HD 22.1 S4:2002
International RelationshipsEN 1870-14:2007+A2:2012
Amended ByAmendment, April 2012
Draft Superseded By11/30231787 DC
DescriptorsOccupational safety, Instructions for use, Sawing machines, Circular saws (machines), Hazards, Machine tools, Control systems, Noise (environmental), Woodworking machines, Safety measures, Verification, Safety devices, Electrical safety, Equipment safety
ICS79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Machines à scies circulaires. Scies à panneaux verticales
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Kreissägemaschinen. Vertikalplattenkreissägemaschinen
CommitteeMTE/23
ISBN978 0 580 72231 8
PublisherBSI
FormatA4
DeliveryYes
Pages60
File Size1.035 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards