BS EN 267:2009+A1:2011 - Automatic forced draught burners for liquid fuels

BS EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

Status : Withdrawn   Published : March 2010 Replaced By : BS EN 267:2020

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This European Standard applies to automatic forced draught oil burners supplied with: - a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and - higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation. This European Standard is applicable to: - single burners fitted to a single combustion chamber; - single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account; - single-fuel and dual-fuel burners when operating on oil only; - the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function. This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J. It deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K. This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance. This European Standard does not deal with hazards due to specific applications. This European Standard deals also with forced draught burners intended to be used with biogenous fuels, mixtures. This European Standard deals also with burners equipped to increase the total appliance efficiency; see Annex L.




Standard NumberBS EN 267:2009+A1:2011
TitleAutomatic forced draught burners for liquid fuels
StatusWithdrawn
Publication Date31 March 2010
Withdrawn Date05 February 2020
Normative References(Required to achieve compliance to this standard)EN 10305-4, EN ISO 9606-5, EN ISO 11688-1:1998, EN ISO 9606-2, EN 953, ISO 9330-5, EN 1854, ISO 15609-1:2004, EN 15035, EN 1088:1995/AMD 2:2008, ISO 12100-2:2003, EN 287-1, ISO 23553-1:2007, ISO 9329-1, EN 10204, EN 10220, EN ISO 15609-5, ISO 9606- 2:2004, ISO 15609-5:2004, ISO 13857:2008, EN 1044, ISO 15612:2004, EN ISO 13857, EN ISO 15609-4, EN 61310-1, EN ISO 12100-1:2003, ISO 12100-1:2003, EN 10305-6, IEC 60730-1:1999, EN ISO 4871, EN ISO 12100-2:2003, EN ISO 9606-4, EN ISO 9606-3, EN ISO 15609-1, IEC 60529:1989, ISO 15609-2:2001, ISO 1129, EN 60730-1, EN ISO 23553-1, EN 1254-1, EN 1057, ISO 13849-1:2006, ISO 6806:1992, EN 1092-1:2018, ISO 228-1:2000, ISO/TR 11688-1:1995, ISO 3183, EN 13611:2007, ISO 8217:2017, EN 15036-1:2006, ISO 1127:1992, BS EN 1092-1:2018, ISO 9606-5:2000, EN 50156-1:2004, ISO 9606-4:1999, ISO 7-1, ISO 4871:1996, ISO 9606-3:1999, ISO 15609-4:2009, EN 60529, EN 1092-3, EN 1092-2, ISO 9330-6, EN 1254-4, EN 60335-2-102:2005, EN 676:2003/AMD 2:2008, ISO 9330-4, ISO 9330-2, IEC 61310-1:2007, IEC 60335-2-102:2004, EN 10305-2, EN 230, EN 10305-3, EN ISO 15609-2
Informative References(Provided for Information)EN 746-2, EN 746-1, ISO/IEC 17025:2005, EN 746-5, EN 12953-6, ISO 13732-1:2006, 98/79/EC, EN 12952-11, EN 746-8, EN 746-4, EN 12952-7, EN 12516-3, 98/37/EC, EN 746-3, prEN 746-7, 2006/42/EC, prEN 746-6, EN 12953-9, EN ISO/IEC 17025, EN ISO 13732-1, 97/23/EC, EN 1050:1996
Replaced ByBS EN 267:2020
ReplacesBS EN 267:1999
International RelationshipsEN 267:2009+A1:2011
Amended ByAmendment, September 2011
Draft Superseded By11/30231764 DC
DescriptorsSmoke, Safety measures, Testing conditions, Viscosity, Exhaust gases, Marking, Combustion test methods, Automatic, Classification systems, Determination of content, Forced-draught burners, Laboratory testing, Combustion products, Electrical safety, Pressure, Temperature, Burners, Oil-fuelled devices, Emission, Design
ICS27.060.10
Title in FrenchBrûleurs automatiques à air soufflé pour combustibles liquides
Title in GermanAutomatische Brenner mit Gebläse für flüssige Brennstoffe
CommitteeGSE/27
ISBN978 0 580 72223 3
PublisherBSI
FormatA4
DeliveryYes
Pages92
File Size1.06 MB
Price£274.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world