BS EN 13218:2002+A1:2008 - Machine tools. Safety. Stationary grinding machines – BSI British Standards

BS EN 13218:2002+A1:2008

Machine tools. Safety. Stationary grinding machines

Status : Superseded, Withdrawn   Published : July 2002 Replaced By : BS EN ISO 16089:2015

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN 13218:2002+A1:2008 Machine tools. Safety. Stationary grinding machines

BS EN 13218 specifies the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines intended to be used for the grinding  of workpieces of cold metal.

BS EN 13218 deals with a range of significant hazards.

BS EN 13218 standard does not apply to honing, polishing and belt grinding machines.

BS EN 13218 applies to machines which are manufactured after the date of issue of this standard.

Contents of BS EN 13218:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Mechanical hazards
5.3 Electrical hazards
5.4 Noise
5.5 Vibration
5.6 Hazards resulting from dusts, fumes and mists
5.7 Devices for the use of coolants
5.8 Measures against fire and explosion hazards
5.9 Lighting
5.10 Control systems and control devices
5.11 Electromagnetic compatibility
6 Verification of the safety requirements and/or measures
7 Information for use
7.1 General
7.2 Instruction handbook
7.3 Marking
Annex A (normative) Abrasive product guards, workzone enclosures and their combinations onstationary grinding machines
Annex B (normative) Clamping methods for abrasive products and safety requirements for tool holding devices

 




Standard NumberBS EN 13218:2002+A1:2008
TitleMachine tools. Safety. Stationary grinding machines
StatusSuperseded, Withdrawn
Publication Date10 July 2002
Withdrawn Date30 June 2016
Normative References(Required to achieve compliance to this standard)CR 1030-1EN 287-1, EN 287-2, EN 288-1, EN 294, EN 349, EN 418, EN 547-1, EN 547-2, EN 614-1, EN 626-1, EN 729-1, EN 953, EN 954-1, EN 982, EN 983, EN 1033, EN 1037, EN 1050:1996, EN 1070, EN 1088:1995, EN 1127-1:1997, EN 1837, EN 10025, EN 10130:1991, EN 10130:1991/AMD 1, EN 12096, EN 12413, EN 13236, EN 13478, EN 22553, ISO 2553:1992, EN 25817:1992, ISO 5817:1992, ENV 26385, ISO 6385:1981, EN 50081-2, EN 50082-2, EN 60204-1:1997, IEC 60204-1:1997, EN 61310-2, IEC 61310-2:1995, EN ISO 3744, ISO 3744:1994, EN ISO 3746, ISO 3746:1995, EN ISO 4871, ISO 4871:1996, EN ISO 11201, ISO 11201:1995, EN ISO 11202, ISO 11202:1995, EN ISO 11204, ISO 11204:1995, EN ISO 11688-1, ISO/TR 11688-1:1995, EN ISO 12100-1:2003, ISO 12100-1:2003, EN ISO 12100-2:2003, ISO 12100-2:2003, ISO 230-5, ISO 666, ISO 1052, ISO 1083, ISO 3522, ISO 3574, ISO 4997, ISO 6316, ISO 6361-2
Informative References(Provided for Information)ISO 6103, ISO 11689, 98/37/EC, 98/79/EC, 89/336/EEC, 73/23/EEC, 2006/42/EC
Replaced ByBS EN ISO 16089:2015
International RelationshipsEN 13218:2002
Amended ByAmendment, February 2009. Amends and replaces BS EN 13218:2002. Corrigendum, July 2010.
Draft Superseded By98/708592 DC
DescriptorsMachine tools, Equipment safety, Grinding machines, Stationary, Occupational safety, Metalworking, Hazards, Safety measures, Safety devices, Control devices, Verification, Noise (environmental), Instructions for use
ICS25.080.50
Title in FrenchMachines-outils. Sécurité. Machines à meuler fixes
Title in GermanWerkzeugmaschinen. Sicherheit. Ortsfeste Schleifmaschinen
CommitteeMTE/1/1
ISBN978 0 580 71478 8
PublisherBSI
FormatA4
DeliveryNo
Pages104
File Size2.326 MB
Price£292.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought