BS EN 13617-1:2012 - Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

BS EN 13617-1:2012

Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

Status : Current, Work in hand   Published : June 2012

Format
PDF

Format
HARDCOPY



This European Standard applies to metering pumps, dispensers and remote pumping units to be installed at petrol filling stations, designed to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l min-1, and intended for use and storage at ambient temperatures between 20 °C and +40 °C. Measures in addition to those required by this European Standard may be required for use and storage at temperature outside this range. The need for and nature of additional requirements should be determined by the manufacturer, if necessary after consulting the client. This European Standard deals with all significant hazards, hazardous situations and events relevant to metering pumps, dispensers and remote pumping units, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard gives health and safety related requirements for the selection, construction and performance of the equipment. This European Standard does not deal with noise and with hazards related to transportation and installation. This European Standard does not include any requirements for metering performance. Vapour recovery efficiency rates are not considered within this European Standard. Fuels other than the ones of Explosion Group IIA are excluded from this European Standard. This European Standard is not applicable to metering pumps, dispensers and remote pumping units which are manufactured before the date of publication of this document by CEN. This European Standard does not apply to equipment for use with liquefied petroleum gas (LPG) or liquefied natural gas (LNG) or compressed natural gas (CNG).




Standard NumberBS EN 13617-1:2012
TitlePetrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
StatusCurrent, Work in hand
Publication Date30 June 2012
Normative References(Required to achieve compliance to this standard)ISO 1182, EN 13463-1:2009, ISO 1825, EN ISO 12100:2010, IEC 60730-2-10, EN 14214, EN ISO 1825, EN 60079-7:2007, EN 60079-10-1, ISO 12100:2010, EN 60730-2-10, EN 60529, EN 14125, IEC 60204-1:2005, EN 60079-14, EN ISO 1182, EN 590, IEC 60947-3, IEC 60079-1:2007, HD 21.13 S1, EN 60947-3, EN 60079-1:2007, EN ISO 16852, IEC 60079-10-1, ISO 16852, HD 22.4 S3, EN 60079-0, EN 13617-2, CEN/TS 15293, IEC 60079-7:2006, EN 13012, EN 228, EN 60204-1:2006, ISO 13849-1, IEC 60079-0, EN 60950-1, IEC 60079-14, IEC 60950-1, ISO 11925-3, EN ISO 13849-1, EN 1360, EN 13483, IEC 60529
Informative References(Provided for Information)IEC 60079-15, 94/9/EC, 2006/42/EC, EN 60079-18, EN 1057, EN 60079-25, ISO 9329-3, ISO 9329-2, EN 1127-1, EN 60079-26, IEC 60079-5, IEC 60079-6, EN 13617-3, IEC 60079-11, IEC 60079-25, IEC 60079-18, EN 60079-6, ISO 9329-4, EN 60079-2, EN 60079-15, EN 60079-11, EN 60079-5, ISO 9329-1, IEC 60079-2, CLC/TR 50404, IEC 60079-26
ReplacesBS EN 13617-1:2004+A1:2009
International RelationshipsEN 13617-1:2012
Draft Superseded By10/30219405 DC
DescriptorsGasoline, Fuel pumps, Vending machines, Vapour barriers, Measuring instruments, Explosive atmospheres, Protected electrical equipment, Safety measures, Filling stations, Flammable atmospheres, Design, Filling devices, Hazards, Equipment safety, Pumps, Performance, Test methods, Liquid fuels, Fire safety
ICS75.200
Title in FrenchStations-service. Exigences relatives à la construction et aux performances de sécurité des distributeurs à pompe immergée, distributeurs de carburants et unités de pompage à distance
Title in GermanTankstellen. Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Zapfsäulen, druckversorgten Zapfsäulen und Fernpumpen
CommitteePVE/393
ISBN978 0 580 71238 8
PublisherBSI
FormatA4
DeliveryYes
Pages56
File Size1.466 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS EN 13012:2012
    Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers