BS EN 14359:2006+A1:2010 - Gas-loaded accumulators for fluid power applications

BS EN 14359:2006+A1:2010

Gas-loaded accumulators for fluid power applications

Status : Superseded, Withdrawn   Published : November 2006 Replaced By : BS EN 14359:2017

*To ask about withdrawn titles contact the
Customer Relations, +44 345 086 9001

1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications (see 1.2). 1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators: - bladder type; - diaphragm type; - piston type; - transfer type; - gas bottles used to provide additional gas capacity. They consist of one or several parts joined together by a variety of mechanical means and by welding. 1.3 This European Standard applies to gas-loaded accumulators which operate with the following conditions: - subject to an internal gauge pressure greater than 0,5 bar; - working temperature of not lower than -50 °C and not higher than +200 °C; - containing Group 2 liquids and gases as defined in the Pressure Equipment Directive 97/23/EC. It does not apply to: - accumulators for use with dangerous fluids (see NOTE 1). NOTE 1 Fluid power applications utilize non-dangerous fluids as categorized in ISO 6743-4 in addition to an inert gas (e.g. nitrogen) which is used as the pre-charging medium. NOTE 2 There are no design limits to the volume of the accumulator.

Standard NumberBS EN 14359:2006+A1:2010
TitleGas-loaded accumulators for fluid power applications
StatusSuperseded, Withdrawn
Publication Date30 November 2006
Withdrawn Date09 June 2017
Normative References(Required to achieve compliance to this standard)ISO 6506-1:2005, ISO 6506-2:2005, EN 13018, ISO 9110-2, ISO 6506-3:2005, EN 13445-4, EN ISO 6506-1, EN ISO 898-1:1999, EN 10002-1, EN ISO 6506-3, EN 10045-1, ISO 9110-1, ISO 15614-1:2004, EN 1043-1, EN ISO 6506-2, ISO 10771-1, EN 1968:2002, FprEN ISO 15614-1, EN 13445-2:2002, ISO 262, EN 13445-3:2002, ISO 898-1:1999, EN 10204:2004
Informative References(Provided for Information)97/23/EC, EN ISO 6743-4:2001, ISO 9000:2005, ISO 6743-4:1999, ISO 5596:1999, EN ISO 9001:2000, EN ISO 9000:2005, ISO 10945:1994, ISO 2944:2000, ISO 9001:2000, ISO 10946:1999, EN 982:1996, ISO 5598:1985
Replaced ByBS EN 14359:2017
ReplacesBS 7201-1:1989
International RelationshipsEN 14359:2006+A1:2010
Amended ByAmendment, April 2011
DescriptorsCast steels, Environment (working), Design, Austenitic steels, Marking, Mathematical calculations, Fluid equipment, Hydraulic equipment, Pressure vessels, Hydraulic accumulators, Instructions for use, Inspection, Mechanical testing, Steels, Conformity, Hydropneumatic accumulators, Acceptance (approval), Production, Hydraulic transmission systems, Equipment safety, Technical documents
Title in FrenchAccumulateurs hydropneumatiques pour transmissions hydrauliques
Title in GermanHydrospeicher für Hydraulikanwendungen
ISBN978 0 580 70172 6
File Size1.993 MB

*To ask about withdrawn titles contact the
Customer Relations, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Worldwide Standards
We can source any standard from anywhere in the world

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Develop a PAS

Develop a fast-track standardization document in 9-12 months