BS EN 12201-5:2011 - Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fitness for purpose of the system

BS EN 12201-5:2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fitness for purpose of the system

Status : Current, Project Underway   Published : November 2011

Format
PDF

Format
HARDCOPY



This European Standard specifies the characteristics of the fitness for purpose of the assembled piping systems intended for the conveyance of water intended for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. It also specifies the method of preparation of test piece joints, and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions. NOTE 1 For PE components intended for the conveyance of water for human consumption and raw water prior to treatment attention is drawn to the introduction of this part of EN 12201. Components manufactured for water for other purposes may not be suitable for water supply for human consumption. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with Parts 1 to 4 of EN 12201 it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar 1) ; b) an operating temperature of 20 °C as a reference temperature. c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. NOTE 2 For applications operating at constant temperatures greater than 20 °C up to 40 °C, see Annex A of EN 12201-1:2011. EN 12201 (all parts) covers a range of allowable operating pressures and gives requirements concerning colours and additives. NOTE 3 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.




Standard NumberBS EN 12201-5:2011
TitlePlastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Fitness for purpose of the system
StatusCurrent, Project Underway
Publication Date30 November 2011
Normative References(Required to achieve compliance to this standard)ISO 1167-2:2006, ISO 13956, EN 12201-1, ISO 11414:2009, EN 713, ISO 1167-4:2007, EN 715, EN ISO 1167-1, EN 12201-2, EN 911, ISO 13954, ISO 14236:2000, ISO 13955, ISO 1167-1:2006, ISO 11413:2008, EN ISO 1167-4, EN 712, EN ISO 1167-2, ISO 13953, prEN 12201-4:2011, EN 12201-3
Informative References(Provided for Information)98/83/EC, CEN/TS 12201-7, 89/106/EEC
ReplacesBS EN 12201-5:2003, BS EN 13244-5:2002
International RelationshipsEN 12201-5:2011
Draft Superseded By10/30212153 DC
DescriptorsPolyethylene, Pressure pipes, Potable water, Drainpipes, Pressure, Drainage, Fitness for purpose, Pipes, Plastic pipelines, Pipe couplings, Pipework systems, Sewerage, Plastics, Testing conditions, Pipe fittings, Water, Water supply, Water supply and waste systems (building, Valves, Sewers, Water supply (buildings)
ICS23.040.05
91.140.60
93.030
Title in FrenchSystèmes de canalisations en plastique pour l'alimentation en eau et pour branchements et les collecteurs d'assainissement avec pression. Polyéthylène (PE). Aptitude à l'emploi du système
Title in GermanKunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen. Polyethylen (PE). Gebrauchstauglichkeit des Systems
CommitteePRI/88/2
ISBN978 0 580 69592 6
PublisherBSI
FormatA4
DeliveryYes
Pages20
File Size365 KB
Price£130.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Collaborate, Innovate, Accelerate.


Customers who bought this product also bought

  • BS EN 12201-1:2011
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
  • BS EN 12201-2:2011+A1:2013
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Pipes
  • BS EN 12201-3:2011+A1:2012
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fittings
  • BS EN 12201-4:2012
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves