BS EN 12201-1:2011 - Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). General
Maintenance will be taking place for Shop on Friday 21st February between 17:00 and 19:00 UK time. Shop will be unavailable during this time or will have limited functionality. Please accept our apologies for any inconvenience caused during this essential maintenance.

BS EN 12201-1:2011

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). General

Status : Current, Under review   Published : November 2011

Format
PDF

Format
HARDCOPY



This European Standard specifies the general aspects of polyethylene (PE) pressure piping systems (mains and service pipes) for buried or above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. NOTE 1 For PE components intended for the conveyance of water intended for human consumption and raw water prior to treatment attention is drawn to Clause 5 of this European Standard. Components manufactured for water for other purposes, drainage and sewerage may not be suitable for water supply for human consumption. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with Parts 2 to 5 of EN 12201, it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar ); b) an operating temperature of 20 °C as a reference temperature; c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. NOTE 2 For applications operating at constant temperatures greater than 20 °C and up to 40 °C, see Annex A. EN 12201 (all parts) covers a range of allowable operating pressures and gives requirements concerning colours and additives. NOTE 3 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.




Standard NumberBS EN 12201-1:2011
TitlePlastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). General
StatusCurrent, Under review
Publication Date30 November 2011
Normative References(Required to achieve compliance to this standard)EN ISO 13479, EN ISO 15512, ISO 1043-1:2001, EN 12201-3, EN ISO 13478, ISO 1183-2:2004, ISO 472:1999, ISO 15512:1999, ISO 6964, EN 12201-2:2011, ISO 13478:2007, ISO/DIS 9080:2010, ISO 13479:2009, EN ISO 12162, EN ISO 1183-2, ISO 1167-1:2006, EN ISO 1183-1, ISO 11357-6, ISO 1167-2:2006, EN ISO 1133, ISO 1183-1:2004, ISO 11413:2008, EN ISO 16871, ISO 12162:2009, ISO 11414:2009, ISO 1133:2005, ISO 18553, EN ISO 1167-1, EN ISO 13477, prEN ISO 9080, ISO 16871:2003, EN ISO 1043-1:2001, prEN 12201-4:2011, EN 12099, ISO 6259-3, EN ISO 6259-1, ISO 6259-1:1997, EN ISO 472:2001, ISO 13954, EN ISO 1167-2, ISO 13477:2008, ISO 13953
Informative References(Provided for Information)ISO 13761:1996, ISO 4065:1996, ISO 2:1973, 98/83/EC, CEN/TS 12201-7, EN 12201-5, 89/106/EEC, ISO 760:1978
ReplacesBS EN 12201-1:2003, BS EN 13244-1:2002
International RelationshipsEN 12201-1:2011
Draft Superseded By10/30212144 DC
DescriptorsPipe fittings, Sewers, Pressure pipes, Plastic pipelines, Potable water, Water supply, Water supply and waste systems (building, Physical properties of materials, Testing conditions, Definitions, Polyethylene, Drainpipes, Plastics, Drainage, Valves, Pipes, Water supply (buildings), Colour, Pressure, Pipework systems, Water, Sewerage, Additives
ICS23.040.05
91.140.60
93.030
Title in FrenchSystèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression. Polyéthylène (PE). Généralités
Title in GermanKunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen. Polyethylen (PE). Allgemeines
CommitteePRI/88/2
ISBN978 0 580 69589 6
PublisherBSI
FormatA4
DeliveryYes
Pages26
File Size459 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 12201-5:2011
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fitness for purpose of the system
  • BS EN 12201-2:2011+A1:2013
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Pipes
  • BS EN 12201-3:2011+A1:2012
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fittings
  • BS EN 12201-4:2012
    Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves