BS EN 15827:2011 - Railway applications. Requirements for bogies and running gears

BS EN 15827:2011

Railway applications. Requirements for bogies and running gears

Status : Confirmed, Current   Published : April 2011

Format
PDF

Format
HARDCOPY



This European Standard consolidates all the separate requirements specified in rolling stock TSIs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope. There are many European Standards that specify the design requirements and associated processes of bogie and running gear components and sub-assemblies. There are also European standards that specify vehicle performance and validation requirements that depend directly on the bogies or running gear. The objective of this standard is to bring all these separate design criteria together. This is accomplished by specifying the design and validation processes to be used for bogies and running gear with particular focus on the two key disciplines of dynamic behaviour and structural integrity. To ensure that safe operation can be continued throughout the product life the definition of a maintenance plan is also required. This European Standard is applicable to bogies and running gear intended for vehicles that will operate under the Interoperability Directives on designated TEN routes. The requirements, however, can be used in other applications at the discretion of the interested parties. It specifies the requirements to achieve a satisfactory design of bogie or running gear and to validate the design against the relevant performance and safety criteria. Technical requirements are specified directly or by making reference to the relevant European standards and include the nature and content of an auditable record that should be produced of the design and validation processes. The requirements address only the design and validation of bogies and running gear. No requirements are set for other systems components that are attached to the bogies or running gear, except to establish that a satisfactory interface has been provided. NOTE Specifications that relate to bogies and running




Standard NumberBS EN 15827:2011
TitleRailway applications. Requirements for bogies and running gears
StatusConfirmed, Current
Publication Date30 April 2011
Confirm Date27 July 2016
Normative References(Required to achieve compliance to this standard)EN 12663-2, EN 15687, EN 12081, EN 14817, EN 473, ISO 6892-1:2009, EN 14363, EN 13298, prEN 15839, EN 13104, prEN 14535-2, EN 60721-3-5, EN 13802, EN 15273-1, EN 15085-2, EN 15273-2, EN 13261, EN 13979-1:2019, EN 14535-1:2019, EN 15227, EN 15085-4, IEC 60721-3-5:1997, EN 15528, EN 13749:2005, BS EN 14535-1:2019, EN 15085-5, EN 13597, EN 15085-1, ISO 3095:2005, EN 14200, EN 12299, EN ISO 3095, EN 15437-1, EN ISO 6892-1, EN 13262, EN 13715, prEN 15892, EN 12663-1, EN 50125-1, prEN 15437-2, EN 13913, EN 13103, EN 12082, EN 12080, EN 15686, EN 15085-3, EN 15313, EN 15049, EN 13260, EN 15663
Informative References(Provided for Information)EN 13803-2, 2008/57/EC, HS TSI RST, ISO 9001:2008, EN 1032, CR TSI RST WAG, NF E 22 620, NF E 22 621, NF F 32 101, DIN 25201-1, EN ISO 9001, UIC 518:2009-09, FprCEN/TS 13979-2, NF E 22 622, RFU-RST-033, DIN 7190, DIN 25201-2, UIC 432, ISO 2631-1, CEN/TS 45545-2:2009, EN 1993-1-9:2005, EN 1999-1-3:2007, EN 15302, EN 13848-1:2019, BS EN 13848-1:2019, NF E 90 401-2, NF E 25 030-1, VDI 2230-1, FprCEN/TS 15718, EN 13803-1
International RelationshipsEN 15827:2011
DescriptorsQuality assurance systems, Railway vehicles, Acceptance (approval), Vehicle suspension systems, Verification, Railway vehicle components, Wheels, Structural design, Maintenance, Loading, Dynamics, Axles, Bogies, Qualification approval, Strength of materials, Axle boxes, Railway equipment Railway applications
ICS45.040
Title in FrenchApplications ferroviaires. Exigences pour bogies et organes de roulement
Title in GermanBahnanwendungen. Anforderungen für Drehgestelle und Fahrwerke
CommitteeRAE/3
ISBN978 0 580 68169 1
PublisherBSI
FormatA4
DeliveryYes
Pages84
File Size647 KB
Price£274.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Customers who bought this product also bought

  • BS EN 13749:2011
    Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
  • BS EN 15807:2011
    Railway applications. Pneumatic half couplings