BS EN ISO 4126-2:2003 - Safety devices for protection against excessive pressure. Bursting disc safety devices – BSI British Standards

BS EN ISO 4126-2:2003

Safety devices for protection against excessive pressure. Bursting disc safety devices

Status : Superseded, Withdrawn   Published : February 2003 Replaced By : BS EN ISO 4126-2:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001


BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure. Bursting disc safety devices

BS EN ISO 4126-2 specifies the requirements for bursting disc safety devices. It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging. The requirements for the application, selection and installation of bursting disc safety devices are given in Part 6 of BS EN ISO 4126.

Contents of BS EN ISO 4126-2:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Terms and definitions
  • Materials
  • Selection of materials
  • Material specifications
  • Protection from corrosion
  • Types of bursting discs
  • Conventional domed bursting discs (forward acting)
  • Reverse domed bursting discs (reverse acting
  • Flat bursting discs
  • Other types and designs
  • Bursting disc holders
  • Design
  • Types
  • Connections
  • Back pressure supports
  • General
  • Opening back pressure supports
  • Non-opening back pressure supports
  • Temperature shields
  • Stiffening rings
  • Gaskets/seals
  • Assembly of bursting disc safety devices
  • General
  • Bursting disc safety devices with replaceable bursting disc assemblies
  • Bursting disc safety devices with non-replaceable bursting disc assemblies
  • Specified bursting pressure requirements
  • Inspection by the manufacturer
  • Test procedures
  • General
  • Pressure testing
  • Burst testing
  • Leak testing
  • Non-destructive examination
  • Certification
  • Product designation
  • Marking
  • General
  • Bursting discs/bursting disc assemblies
  • Bursting disc holders
  • Bursting disc safety devices with non-replaceable bursting disc assemblies
  • Ancillary components
  • Omission of markings
  • Preparation for storage and transportation
  • General
  • Marking of packages
  • Provision of assembly and installation instructions
  • Provision of documents, loose identification plates etc.
  • Materials
  • Materials
  • Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC (PED)
  • Bibliography



Standard NumberBS EN ISO 4126-2:2003
TitleSafety devices for protection against excessive pressure. Bursting disc safety devices
StatusSuperseded, Withdrawn
Publication Date10 February 2003
Withdrawn Date20 March 2019
Normative References(Required to achieve compliance to this standard)EN 10028-1:2017, EN 1092-1:2018, BS EN 1092-1:2018, EN 10222-1:2017, DIN 17850, EN 485-4, ASTM B265, EN 573-4, EN 10088-1, BS 3073, EN 1333, ASTM B333, ASTM B443, DIN 17743, ASTM B162, EN ISO 6708, ASTM B209, DIN 17740, EN 10095, ASTM B424, EN 1652, ASTM B127, ASTM B575, EN 1653, EN 10028-7, EN 485-1, EN 485-3, SEW 400, DIN 17742, ASTM B708, ASTM B569, BS 3072, EN 573-3, ASTM AMD 240/AMD 240M, DIN 17744, ASTM B168, EN 485-2
Informative References(Provided for Information)ASTM B574, EN 10216-2, ASTM B550/B550M, ASTM B364, ASTM A576, ASTM AMD 210/AMD 210M, ASTM AMD 494/AMD 494M, ASTM B165, prEN 12516-1, BS 3146-1, ASTM AMD 182/AMD 182M, ASTM B473, ASTM A519, ASTM B584, ASTM B166, prEN 10216-5, BS 3074, ASTM AMD 790/AMD 790M, ASTM B367, BS 3076, ASTM AMD 696/AMD 696M, EN 10272, ASTM AMD 351/AMD 351M, EN 10087, ASTM B160, DIN 17869, EN 10273, ASTM AMD 312/AMD 312M, ASTM B164, ASTM AMD 106, DIN 17861, prEN 1759-1, ASTM AMD 36/AMD 36M, ASTM AMD 216/AMD 216M, ASTM B167, ASTM B444, EN 10025, ASTM B381, ASTM AMD 479/AMD 479M, ASTM B564, ASTM AMD 105/AMD 105M, ASTM B423, ASTM B348, ASTM AMD 789/AMD 789M, ASTM B335, ASTM B161, ASTM AMD 516/AMD 516, EN 10088-3, BS 3146-2, ASTM B425, ASTM B446, ASTM B493, ASTM AMD 350/AMD 350M, EN 10088-2, DIN 17860, EN 10222-2:2017, EN 10222-3:2017, EN 10222-5:2017, DIN 17864, DIN 17851, EN 10028-4:2017, EN 10028-2:2017, DIN 17862
Replaced ByBS EN ISO 4126-2:2019
ReplacesBS 2915:1990
International RelationshipsISO 4126-2:2003,EN ISO 4126-2:2003
Amended ByAMD 15405
AMD 16820
Corrigendum, July 2009; Corrigendum, December 2006
DescriptorsMarking, Inspection, Pressure equipment, Packaging, Certification (approval), Safety valves, Valves, Bursting discs, Safety devices, Pressure testing, Design
ICS13.240
23.060.40
Title in FrenchDispositifs de sécurité pour la protection contre les pressions excessives. Dispositifs de sûreté à disque de rupture
Title in GermanSicherheitseinrichtungen gegen unzulässigen Überdruck. Berstscheibeneinrichtungen
CommitteePSE/18/6
ISBN978 0 580 67726 7
PublisherBSI
FormatA4
DeliveryYes
Pages40
File Size732 KB
Price£214.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN ISO 4126-3:2006
    Safety devices for protection against excessive pressure Safety valves and bursting disc safety devices in combination
  • BS ISO 4126-9:2008
    Safety devices for protection against excessive pressure Application and installation of safety devices excluding stand-alone bursting disc safety devices
  • BS ISO 4126-10:2010
    Safety devices for protection against excessive pressure Sizing of safety valves for gas/liquid two-phase flow
  • BS EN ISO 4126-4:2013
    Safety devices for protection against excessive pressure Pilot-operated safety valves