BS EN 50065-1:2001+A1:2010 - Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances – BSI British Standards

BS EN 50065-1:2001+A1:2010

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances

Status : Revised, Withdrawn   Published : November 2001 Replaced By : BS EN 50065-1:2011

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN 50065-1:2001+A1:2010 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances

BS EN 50065-1 applies to electrical equipment using signals in the frequency range 3 kHz to 148,5 kHz to transmit information on low voltage electrical systems, either on the public electricity distribution network or within installations in consumers premises.

BS EN 50065-1 specifies the frequency bands allocated to the different applications, limits for the terminal output voltage in the operating band and limits for conducted and radiated disturbance. It also gives the methods of measurement.

BS EN 50065-1 does not specify the signal modulation methods nor the coding methods nor functional features (except those for the prevention of mutual interference).

Environmental requirements and tests are not included.

In most countries the transmission of information is subject to regulation. Compliance with this standard does not imply permission to establish communication with locations outside the consumer.s installation or with other consumers through the public electricity distribution network where this would not otherwise be allowed.

The object of BS EN 50065-1 is to limit mutual influence between signal transmission equipment in electrical installations and between such equipment and other equipment. In addition this standard is intended to limit interference caused by signal transmission equipment to sensitive electronic equipment. However, complete freedom from such interference cannot be assured.

Contents of BS EN 50065-1:

1 Scope
2 Normative references
3 Definitions
4 Frequency bands
5 Access protocol
6 Transmitter output voltage
7 Disturbance limits
8 Test conditions
9 Inadvertent operation

Annexes
A (normative) Method of measurement of the frequency range over which a transmitter device detects a signal from another device in the frequency range 125 kHz to 140 kHz
B (normative) Method of measurement of the spectral distribution of a transmitting device.s signal in the frequency range 125 kHz to 140 kHz
C (normative) Methods of measurement (9 kHz to 30 MHz)
D (normative) Methods of measurement of disturbance power (30 MHz to 1GHz
E (normative) Attenuation characteristics of measuring instrument above 150 kHz
F (informative)Design for a single artificial network intended to show the performance of a signalling system

 




Standard NumberBS EN 50065-1:2001+A1:2010
TitleSignalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances
StatusRevised, Withdrawn
Publication Date05 November 2001
Withdrawn Date30 June 2011
Normative References(Required to achieve compliance to this standard)IEC 60050-161, EN 55016-1-1:2007, EN 55016-1-1:2007/AMD 1:2007, EN 55016-1-1:2007/AMD 2:2008, CISPR 16-1-1:2006, CISPR 16-1-1:2006/AMD 1:2006, CISPR 16-1-1:2006/AMD 2:2007, EN 55016-1-2:2004, EN 55016-1-2:2004/AMD 1:2005, EN 55016-1-2:2004/AMD 2:2006, CISPR 16-1-2:2003, CISPR 16-1-2:2003/AMD 1:2004, CISPR 16-1-2:2003/AMD 2:2006, EN 55016-1-4:2007, EN 55016-1-4:2007/AMD 1:2008, CISPR 16-1-4:2007, CISPR 16-1-4:2007/AMD 1:2007, EN 55016-2-2:2004, EN 55016-2-2:2004/AMD 1:2005, EN 55016-2-2:2004/AMD 2:2005, CISPR 16-2-2:2003, CISPR 16-2-2:2003/AMD 1:2004, CISPR 16-2-2:2003/AMD 2:2005
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN 50065-1:2011
ReplacesBS EN 50065-1:1992
International RelationshipsEN 50065-1:2001
Amended ByAmendment, April 2010. Amends and replaces BS EN 50065-1:2001.
Draft Superseded By09/30202783 DC99/203889 DC
DescriptorsElectrical installations, Low-voltage installations, Electrical equipment, Signals, Signal transmission, Mains electricity supply, Communication equipment, Frequency bands, Electric power system disturbances, Noise (spurious signals), Radio disturbances, Frequency measurement, Electrical measurement, Electromagnetic radiation
ICS33.040.30
33.100.01
Title in FrenchTransmission de signaux sur les réseaux électriques basse-tension dans la bande de fréquences de 3 kHz à 148,5 kHz. Règles générales, bandes de fréquences et perturbations électromagnétiques
Title in GermanSignalübertragung auf elektrischen Niederspannungsnetzen im Frequenzbereich 3 kHz bis 148,5 kHz. Allgemeine Anforderungen, Frequenzbänder und elektromagnetische Störungen
CommitteePEL/205
ISBN978 0 580 67669 7
PublisherBSI
FormatA4
DeliveryNo
Pages30
File Size1.044 MB
Price£182.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards