BS ISO 815-1:2008 - Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures – BSI British Standards

BS ISO 815-1:2008

Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures

Status : Revised, Superseded, Withdrawn   Published : January 2009 Replaced By : BS ISO 815-1:2014

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures

Together with BSISO 815-2, BS ISO 815-1 cancels and replaces ISO 815:1991, as well as Technical Corrigendum ISO 815:1991/Cor.1:1993, which have been technically revised.
The main modifications concern changes in tolerances and the inclusion of the ageing ovens specified in ISO 188, with a view to improving the precision of the method.

ISO 815 consists of the following parts, under the general title Rubber, vulcanized or thermoplastic — Determination of compression set:
Part 1: At ambient or elevated temperatures
Part 2: At low temperatures.

BS ISO 815-1 specifies methods for the determination of the compression set characteristics of vulcanized and thermoplastic rubbers at ambient or elevated temperatures.

The methods are intended to measure the ability of rubbers of hardness within the range 10 IRHD to 95 IRHD to retain their elastic properties at specified temperatures after prolonged compression at constant strain (normally ) under one of the alternative sets of conditions described. For rubber of nominal hardness 80 IRHD and above, a lower compression strain is used: for a nominal hardness from 80 IRHD to 89 IRHD and for a nominal hardness from 90 IRHD to 95 IRHD.

When rubber is held under compression, physical or chemical changes can occur that prevent the rubber returning to its original dimensions after release of the deforming force. The result is a set, the magnitude of which depends on the time and temperature of compression as well as on the time and temperature of recovery. At elevated temperatures, chemical changes become increasingly more important and lead to a permanent set.

Short-time compression set tests, typically for , at elevated temperatures are commonly used as a measure of the state of cure, a means of material classification and a specification to ensure the quality of a compound. Longer tests, typically for , at elevated temperatures take account of the effect of ageing and are often used to predict service performance, including that of sealing materials. Short-time tests at ambient temperature show mainly the effect of physical changes (re-orientation of the molecular chains and the fillers).

Contents of BS ISO 815-1 contain:

  • Scope
  • Normative references
  • Principle
  • Apparatus
  • Test pieces
  • Test conditions
  • Procedure
  • Expression of results
  • Precision
  • Test report
  • Precision
  • Guidance for using precision results

BS ISO 815-1:2008 replaces BS 903-A6:1992 which remains current.




Standard NumberBS ISO 815-1:2008
TitleRubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
StatusRevised, Superseded, Withdrawn
Publication Date31 January 2009
Withdrawn Date31 August 2014
Normative References(Required to achieve compliance to this standard)ISO 188:2007, ISO 4287, ISO/TR 9272, ISO 23529:2004
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS ISO 815-1:2014
ReplacesBS 903-A6:1992, ISO 815:1991
International RelationshipsISO 815-1:2008
Amended ByCorrigendum, March 2009.
Draft Superseded By06/30136465 DC
DescriptorsRubber, Vulcanized rubber, Thermoplastic polymers, Compression set, Elasticity, Compression testing, Mechanical testing, Test equipment, Specimen preparation, Test specimens, Temperature
ICS83.060
Title in FrenchCaoutchouc vulcanisé ou thermoplastique. Détermination de la déformation rémanente après compression. À températures ambiantes ou élevées
Title in GermanElastomere oder thermoplastische Elastomere. Bestimmung des Druckverformungsrestes. Umgebungs- oder erhöhte Temperaturen
CommitteePRI/22
ISBN978 0 580 67265 1
PublisherBSI
FormatA4
DeliveryNo
Pages20
File Size1.89 MB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS ISO 188:2011
    Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
  • BS EN 1011-1:2009
    Welding. Recommendations for welding of metallic materials General guidance for arc welding