BS EN 60317-43:1997+A1:2010 - Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copperwire, class 240 – BSI British Standards

BS EN 60317-43:1997+A1:2010

Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copperwire, class 240

Status : Current   Published : August 1997

Format
PDF

Format
HARDCOPY



BS EN 60317-43:1997+A1:2010 Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copperwire, class 240

BS EN 60317-43 specifies requirements of tape wrapped round copper winding wire of class 240.

The insulation consists of one or two wrappings of aromatic polyimide tape.

Class 240 is a thermal class that requires a temperature index of at least 240, and a heat shock temperature of at least 260 °C.

The tape is coated on one or both sides with a suitable adhesive, for instance, fluorinated ethylene propylene. After wrapping, the tape is heat-sealed to form a continuous and adherent sheath. Specific requirements may be subject to contract.

The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which the wire is recommended to be used and this will depend on many factors, including the types of equipment involved.

The range of nominal conductor diameters covered by this standard is: 1,600 mm up to and including 5,000 mm.

The nominal conductor diameters are given in Table 1.

When reference is made to winding wire according to this standard, the following information should be given:

— Reference to IEC 60317-43
— Diameter of the conductor
— Grade.

Example: 60317-43 IEC 2,000 mm grade A2

Contents of BS EN 60317-43:

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and general notes
on methods of test
4 Dimensions
5 Electrical resistance
6 Elongation
7 Springiness
8 Flexibility and adherence
9 Heat shock
10 Cut-through
11 Resistance to abrasion
12 Resistance to solvents
13 Breakdown voltage
14 Continuity of insulation
15 Temperature index
16 Resistance to refrigerants
17 Solderability
18 Heat or solvent bonding
19 Dielectric dissipation factor
20 Resistance to transformer oil
21 Loss of mass 6
30 Packaging 6

 




Standard NumberBS EN 60317-43:1997+A1:2010
TitleSpecifications for particular types of winding wires. Aromatic polyimide tape wrapped round copperwire, class 240
StatusCurrent
Publication Date15 August 1997
Normative References(Required to achieve compliance to this standard)EN 60851, ISO 603:1973, IEC 60172, IEC 60851, EN 60172
Informative References(Provided for Information)No other standards are informatively referenced
International RelationshipsIEC 60317-43:1997/AMD1:2010,EN 60317-43:1997/A1:2010
Amended ByAmendment, June 2010
Draft Superseded By09/30200593 DC
DescriptorsGrades (quality), Copper, Aromatic compounds, Polyimides, Electrical insulation, Wrapping, Electric conductors, Temperature ratio, Tape, Windings, Dimensional tolerances, Bend testing, Electric wires, Elongation, Wires, Breakdown voltage, Diameter, Electrical resistance, Packaging, Testing conditions, Adhesion, Circular shape, Classification systems, Dimensions, Adhesion tests, Electrical components, Thermal-shock resistance, Insulated wires
ICS25.040.40
29.060.10
35.100.01
Title in FrenchSpécifications pour types particuliers de fils de bobinage. Fil de section circulaire en cuivre recouvert d'un ruban de polyimide aromatique, classe 240
Title in GermanTechnische Lieferbedingungen für bestimmte Typen von Wickeldrähten. Runddrähte aus Kupfer, mit Band aus aromatischem Polyimid umwickelt, Klasse 240
CommitteeL/-/99
ISBN978 0 580 67188 3
PublisherBSI
FormatA4
DeliveryYes
Pages12
File Size502 KB
Price£110.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards