BS EN 50377-4-2:2011 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

BS EN 50377-4-2:2011

Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

Status : Confirmed, Current   Published : April 2011

Format
PDF

Format
HARDCOPY



1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a connector terminated with cylindrical zirconia 8° angled PC ferrule and assembled singlemode resilient alignment sleeve SC-APC simplex connector set (plug/adaptor/plug), adaptor and patchcord must meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.6. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation cannot be assured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in an uncertain level of random attenuation performance. 1.3 Operating environment The tests selected combined with the severities and durations are representative of a category U environment described in EN 61753 1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.




Standard NumberBS EN 50377-4-2:2011
TitleConnector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
StatusConfirmed, Current
Publication Date30 April 2011
Confirm Date30 January 2019
Normative References(Required to achieve compliance to this standard)IEC 61300-2-42, EN 61300-2-1, IEC 61300-2-2, EN 61300-2-22, IEC 61300-3-23, EN 61300-2-18, IEC 61300-3-10, IEC 61300-3-16, IEC 61300-3-6, IEC 61300-2-22, IEC 61300-2-7, EN 61300-2-44, IEC 61300-2-18, ISO 8015, IEC 61300-2-17, EN 61300-2-6, IEC 61300-2-26, EN 61300-2-2, EN 61300-2-17, EN 61300-3-23, EN 61300-3-10, IEC 60793-2-50, EN 61300-3-34, EN 61300-2-27, IEC 61300-2-46, IEC 61753-1:2018, BS EN 61753-1, EN 61300-2-46, EN IEC 61753-1:2018, BS EN IEC 61753-1:2018, EN 61300-2-4, EN 61300-2-7, IEC 61300-2-6, EN 60793-2-50, EN 61300-2-5, EN 61300-3-42, IEC 61300-3-42, IEC 61300-2-27, EN 61300-3-6, IEC 61300-2-12, IEC 61300-3-34, IEC 61300-2-1, EN 61300-2-26, EN 61300-3-16, IEC 61300-2-4, EN 61300-2-12, IEC 61300-2-44, IEC 61300-2-5, IEC 61300-3-15, EN 61300-3-15, EN 61300-3-28, IEC 61300-3-28, EN 61300-2-42
Informative References(Provided for Information)EN 60794-2-50, IEC 61755-1, EN 61755-1, IEC 60794-2-50, EN 60794-2:2017, EN 61755-2-2, IEC 61755-2-2, IEC 60794-2:2017, EN 61300-3-4, IEC 61755-3-2:2006/Corrigendum:2009, EN 61754-4, ETSI EN 300 019, EN 61755-3-2:2009, IEC 61754-15, IEC 61755-3-2:2006, EN 61754-15, EN 61300, IEC 61300, IEC 61300-3-4, IEC 61300-3-35, EN 61300-3-35, IEC 61754-4, ETSI TS 100 671
International RelationshipsEN 50377-4-2:2011,IEC 60287-1-1:2006
Draft Superseded By08/30193101 DC
DescriptorsPerformance testing, Optical fibres, Marking, Dimensions, Performance, Fibre optic connectors, Simplex transmission, Environment (working), Communication networks, Optical properties of materials, Electronic equipment and components, Optical communication systems, Mechanical properties of materials, Attenuation, Environmental testing, Fibre optics, Fibre optic cables
ICS33.180.20
Title in FrenchJeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques. Spécifications de produits. Type simplex SC/APC à 8 degrés câblé sur une fibre unimodale de types B1.1 et B1.3 selon la CEI 60793-2- 50, avec férule en zircone plein de catégorie U
Title in GermanSteckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme. Produktnormen. Bauart SC-APC-Simplex, 8°, zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Zirkoniumdioxyd-Ferrule für die Kategorie U
CommitteeGEL/86/2
ISBN978 0 580 65345 2
PublisherBSI
FormatA4
DeliveryYes
Pages38
File Size1.202 MB
Price£214.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world