BS EN 50215:2009 - Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service

BS EN 50215:2009

Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service

Status : Current, Under review   Published : August 2010

Format
PDF

Format
HARDCOPY



This European Standard specifies general criteria to demonstrate by testing that newly constructed complete railway vehicles conform with standards or other normative documents. This standard is intended to be used as technical instructions for the processing of tests which may be needed for demonstration of certain technical requirements where they are relevant. This standard is not intended to be used as a list of approval requirements without consideration of aforementioned technical requirements. This standard, as a whole or in part, applies to all railway vehicles except special purpose vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of application of the standard for particular vehicles will be specifically mentioned in the contract. NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight, powered, trailer, etc.). NOTE 2 The scope of this standard excludes railbound and road/rail vehicles for construction and maintenance of railway infrastructure. NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to the vehicle. In so far as this standard is applicable it may be used for the following: - generator sets mounted on a vehicle provided for auxiliary purposes; - the electrical transmission used on trolley buses or similar vehicles; - control and auxiliary equipment of vehicles with non-electrical propulsion systems; - vehicles guided, supported or electrically propelled by systems which do not use the adhesion between wheel and rail.




Standard NumberBS EN 50215:2009
TitleRailway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
StatusCurrent, Under review
Publication Date31 August 2010
Normative References(Required to achieve compliance to this standard)ISO 3095:2005, EN 60349-2:2001, EN 60077-2:2002, EN 50121-3-1:2006, IEC 60077-1:1999, EN 50343:2003, EN 50155:2007, EN 50317:2002, EN 14531-1:2005, EN 50153:2002, IEC 60349-2:1993, EN 14813-2:2006, EN 13775-3:2003, EN 13129-2:2004, EN 50388:2005, IEC 60077-2:1999, EN 50238:2003, EN 14752:2005, EN 14363:2005, EN 13775-4:2004, EN 12663:2000, EN 13775-1:2003, EN 50206-2:1999, EN 14067-4:2005, EN 50206-1:1998, EN 13775-6:2004, EN 60529:1991, EN 50163:2004, EN 13272:2001, EN 50121-3-2:2006, EN 14750-2:2006, EN 13452-2:2003, EN 13775-2:2003, EN 14067-5:2006, EN 50317:2002/AMD 1:2004, EN 60077-5:2003, EN 61377-3:2002, EN 60349-1:2000/AMD 1:2002, EN 60322:2001, IEC 61377-2:2002, EN 60077-3:2003, EN 60077-4:2003, ISO 3381:2005, EN 50126-1:1999, IEC 60349-1:1999, IEC 61377-3:2002, EN 60310:2004, IEC 61287-1:2005, IEC 60529:1989, IEC 60077-5:2003, EN 60077-1:2002, IEC 61377-1:2006, EN 60529:1991/AMD 1:2000, EN 61287-1:2006, EN 15806, IEC 60310:2004, EN 61377-2:2002, IEC 60322:2001, EN 60349-1:2000, EN 50317:2002/AMD 2:2007, EN 61377-1:2006, IEC 60349-1:1999/AMD 1:2002, IEC 60077-3
Informative References(Provided for Information)UIC 544-1:2004, UIC 541-03:1984, ISO/IEC 17025:2005, UIC 540:2006, EN ISO 9001:2000, UIC 547:1989, UIC 623-1:2006, UIC 505-1:2006, UIC 623-2:2006, UIC 541-3:2006, UIC 546:1967, UIC 541-05:2005, UIC 541-4:2007,

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


BSOL

The faster, easier way to work with standards