BS EN 13074-1:2011, BS 2000-493:2011 - Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation

BS EN 13074-1:2011, BS 2000-493:2011

Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation

Status : Superseded, Withdrawn   Published : May 2011 Replaced By : BS EN 13074-1:2019, BS 2000-493:2019

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


This European Standard specifies a method for the recovery of binder from a bituminous emulsion or from a cut-back or fluxed bitumen after conditioning at ambient temperature for 24 h followed by 24 h at 50 °C, in such a way that will enable further testing with minimum changes of the binder characteristics. It applies to all types of bituminous emulsions, modified with polymers or non-modified, as well as to all types of cut-back and fluxed bitumens, both modified with polymers and non-modified. For cut-back and fluxed bituminous binders, this test method is only an intermediate step and should be followed by the stabilisation procedure specified by EN 13074-2. Direct testing of the recovered binder is however used to evaluate the setting ability of fluxed bituminous binders made with vegetal fluxes. NOTE The recovered binder is not necessarily identical to the initial binder. WARNING — The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found low enough to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.




Standard NumberBS EN 13074-1:2011, BS 2000-493:2011
TitleBitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders. Recovery by evaporation
StatusSuperseded, Withdrawn
Publication Date31 May 2011
Withdrawn Date18 February 2019
Normative References(Required to achieve compliance to this standard)EN 13074-2, EN 13808, EN 1428, EN 58, EN 1431, EN 12594:2007
Informative References(Provided for Information)EN 15322
Replaced ByBS EN 13074-1:2019, BS 2000-493:2019
ReplacesBS EN 13074:2002, BS 2000-493:2002
International RelationshipsEN 13074-1:2011
Draft Superseded By08/30189590 DC
DescriptorsBituminous products, Evaporation, Determination of content, Fluxed bitumens, Cut-back bitumens, Bitumens, Construction materials, Binding agents, Petroleum products, Extraction methods of analysis, Emulsions
ICS91.100.50
Title in FrenchBitumes et liants bitumineux. Récupération du liant d'une émulsion de bitume ou d'un bitume fluidifié ou fluxé par évaporation. Récupération par évaporation
Title in GermanBitumen und bitumenhaltige Bindemittel. Rückgewinnung des Bindemittels aus Bitumenemulsion oder verschnittenen oder gefluxten Bitumen. Rückgewinnung durch Verdunstung
CommitteePTI/13
ISBN978 0 580 64494 8
PublisherBSI
FormatA4
DeliveryYes
Pages16
File Size360 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought