BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes. Coarse thread and fine pitch thread

BS EN ISO 898-2:2012

Mechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes. Coarse thread and fine pitch thread

Status : Current, Under review   Published : April 2012

Format
PDF

Format
HARDCOPY



What is this standard about?

This is the second part in the BS EN ISO 898 series of standards on the mechanical properties of fasteners made of carbon steel and alloy steel. “Fasteners” is the term used when bolts, screws and studs are considered all together. This part looks at coarse and fine pitch threads.

Who is this standard for?

  • Manufacturers and designers of fasteners
  • Testers of fasteners
  • Health and safety/quality industries

Why should you use this standard?

It specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C.

Nuts conforming to the requirements of this part of ISO 898 are evaluated at that ambient temperature range. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures.

Nuts conforming to these requirements have been used in applications ranging from –50 °C to +150 °C. It is the responsibility of users to consult an experienced fastener materials expert for temperatures outside the range of –50 °C to +150 °C and up to a maximum temperature of +300°C to determine appropriate choices for a given application.

Information for the selection and application of steels for use at lower and elevated temperatures is given for instance in BS EN 10269, ASTM F2281 and in ASTM A320/A320M.

This part of ISO 898 applies to nuts:

  • Made of carbon steel or alloy steel
  • With coarse thread M5 ≤ D ≤ M39, and fine pitch thread M8×1 ≤ D ≤ M39×3
  • With triangular ISO metric thread according to ISO 68-1
  • With diameter/pitch combinations according to ISO 261 and ISO 262
  • With specified property classes, including proof load
  • With different nut styles: thin nuts, regular nuts and high nuts
  • With minimum height m ≥ 0,45D
  • With a minimum outside diameter or width across flats s ≥ 1,45D
  • Able to mate with bolts, screws and studs with property classes according to ISO 898-1.

For hot dip galvanized nuts, see ISO 10684.

NOTE: This part of ISO 898 does not specify requirements for properties such as:

  • Prevailing torque properties (see ISO 2320)
  • Torque/clamp force properties (see ISO 16047 for test method)
  • Weldability
  • Corrosion resistance

What’s changed since the last update?

This third edition is a technical revision which replaces the second edition (BS EN ISO 898-2:1992) and BS EN ISO 898-6:1994.




Standard NumberBS EN ISO 898-2:2012
TitleMechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes. Coarse thread and fine pitch thread
StatusCurrent, Under review
Publication Date30 April 2012
Normative References(Required to achieve compliance to this standard)ISO 6507-1, ISO 6157-2, ISO 7500-1, ISO 6508-1, ISO 6892-1, ISO 16426, ISO 6506-1
Informative References(Provided for Information)ISO 16047, ISO 4033, ASTM F2281, ISO 68-1, ISO 10684, ISO/TR 16224, ISO 898-6, ASTM A320/A320M, EN 10269, ISO 286-2, ISO 261, ISO 4032, ISO 2320, ISO 898-2, ISO 262
ReplacesBS EN 20898-2:1994, ISO 898-2:1992, BS EN ISO 898-6:1996
International RelationshipsEN ISO 898-2:2012,ISO 898-2:2012
Draft Superseded By10/30165712 DC
DescriptorsLow-alloy steels, Alloy steels, Hardness testing, Thread pitch, Mechanical testing, Testing conditions, Hexagonal-head fasteners, Threaded fasteners, Proof stress, Diameter, Unalloyed steels, Proof loading, Grades (quality), Fasteners, Internal-thread fasteners, Nuts, Mechanical properties of materials, Chemical composition, Tensile strength, Failure (mechanical), Bolted joints, Hardness, Designations, Steels, Screwed joints, Threads
ICS21.060.20
Title in FrenchCaractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié. Écrous de classes de qualité specifies. Filetages à pas gros et filetages à pas fin
Title in GermanMechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl. Muttern mit festgelegten Festigkeitsklassen. Regelgewinde und Feingewinde
CommitteeFME/9
ISBN978 0 580 70362 1
PublisherBSI
FormatA4
DeliveryYes
Pages30
File Size1.161 MB
Price£186.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Customers who bought this product also bought

  • BS EN ISO 898-1:2013
    Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
  • BS EN ISO 898-5:2012
    Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
  • BS 3692:2014
    ISO metric precision hexagon bolts, screws and nuts. Specification
  • BS EN ISO 4014:2011
    Hexagon head bolts. Product grades A and B