BS EN 50121-5:2006 - Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus – BSI British Standards
As part of BSI's continuing improvements this website will be unavailable on Saturday 16th November. For more information or assistance please email or call 0345 086 9001

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN 50121-5:2006

Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus

Status : Revised, Superseded, Withdrawn   Published : September 2006 Replaced By : BS EN 50121-5:2015

*To ask about withdrawn titles contact the
BSI Customer Services, +44 345 086 9001

The requirements of BS EN 50121-5:2006 have been specified so as to ensure a level of electromagnetic emission which will cause minimal disturbance to other equipment. The levels, however, do not cover the following cases:

  • where the probability of an occurrence likely to produce emissions in excess of those which would normally be experienced is extremely low
  • where highly susceptible apparatus will be used in close proximity of the equipment covered by this standard, in which case further measures may have to be taken.

The emission limits given are on the basis that the equipment of the product family range is installed in railway substation areas.

BS EN 50121-5:2006 applies to emission and immunity aspects of EMC for electrical and electronic apparatus and systems intended for use in railway fixed installations associated with power supply.

This includes the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items such as switching stations, power autotransformers, booster transformers, substation power switchgear and power switchgear to other longitudinal and local supplies.

Filters operating at railway system voltage (for example, for harmonic suppression or power factor correction) are not included in this standard since each site has special requirements. Filters would normally have separate enclosures with separate rules for access. If electromagnetic limits are required, these will appear in the specification for the equipment.

The limits in this standard do not apply to intentional communication signals.

The frequency range considered is from d.c. to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified.

Emission and immunity limits are given for items of apparatus which are situated:

  • within the boundary of a substation which delivers electric power to a railway
  • beside the track for the purpose of controlling or regulating the railway power supply, including power factor correction and filtering
  • along the track for the purpose of supplying electrical power to the railway other than by means of the conductors used for contact current collection, and associated return conductors. Included are high voltage feeder systems within the boundary of the railway which supply substations at which the voltage is reduced to the railway system voltage
  • beside the track for controlling or regulating electric power supplies to ancillary railway uses. This category includes power supplies to marshalling yards, maintenance depots and stations
  • various other non-traction power supplies from railway sources which are shared with railway traction.

Apparatus and systems which are in an environment which can be described as residential, commercial or light industry, even when placed within the physical boundary of the railway substation, shall comply with the relevant generic European EMC standard.

Excluded from the immunity requirements of this standard is power supply apparatus which is intrinsically immune to the tests defined in Tables 1 to 6 of this standard.

These specific provisions are to be used in conjunction with the general provisions in BS EN 50121-1.

This part of the standard covers requirements for both apparatus and fixed installations. The sections for fixed installations are not relevant for CE marking.

BS EN 50121-5:2006 supersedes BS EN 50121-5:2000 which has been withdrawn.

ISBN 0 580 49111 0 

Standard NumberBS EN 50121-5:2006
TitleRailway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
StatusRevised, Superseded, Withdrawn
Publication Date29 September 2006
Withdrawn Date31 March 2015
Cross ReferencesEN 50121-1, EN 50121-2, EN 55016-1-1, CISPR 16-1-1, EN 55022, CISPR 22, EN 61000-3-2, IEC 61000-3-2, EN 61000-3-3, IEC 61000-3-3, EN 61000-4-2, IEC 61000-4-2, EN 61000-4-3, IEC 61000-4-3, EN 61000-4-4, IEC 61000-4-4, EN 61000-4-5, IEC 61000-4-5, EN 61000-4-6, IEC 61000-4-6, EN 61000-4-8, IEC 61000-4-8, EN 61000-4-12, IEC 61000-4-12, EN 61000-6-2, IEC 61000-6-2, EN 61000-6-4, IEC 61000-6-4, EN 50152-1, EN 60255, IEC 60255, EN 60694, IEC 60694, CISPR 18, 2004/108/EC
Replaced ByBS EN 50121-5:2015
ReplacesBS EN 50121-5:2000
International RelationshipsEN 50121-5:2006
Amended ByCorrigendum, October 2008.
Draft Superseded By04/30116608 DC
DescriptorsRailway equipment, Electromagnetic compatibility, Noise (spurious signals), Electromagnetic radiation, Electromagnetic fields, Electrical equipment, Electronic equipment and components, Radio disturbances, Railway fixed equipment, Railway electric traction equipment, Electric power systems, Electric power system disturbances, Electric substations, Emission, Performance, Electrical protection equipment, Switchgear, Switching substations, Autotransformers, Power transformers, Booster transformers, Frequencies Railway applications
Title in FrenchApplications ferroviaires. Compatibilité électromagnétique. Emission et immunité des installations fixes d'alimentation de puissance et des équipements associés
Title in GermanBahnanwendungen. Elektromagnetische Verträglichkeit. Störaussendungen und Störfestigkeit von ortsfesten Anlagen und Einrichtungen der Bahnenergieversorgung
ISBN978 0 580 63370 6
File Size1.13 MB

*To ask about withdrawn titles contact the
BSI Customer Services, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


The faster, easier way to work with standards

Collaborate, Innovate, Accelerate.

Worldwide Standards
We can source any standard from anywhere in the world

Customers who bought this product also bought

  • BS EN 50125-3:2003
    Railway applications. Environmental conditions for equipment Equipment for signalling and telecommunications