DD CEN/TS 1992-4-1:2009 - Design of fastenings for use in concrete. General

DD CEN/TS 1992-4-1:2009

Design of fastenings for use in concrete. General

Status : Superseded, Withdrawn   Published : June 2009 Replaced By : BS EN 1992-4:2018

*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001

1.1 General 1.1.1 This CEN/TS provides a design method for fasteners for structural purposes, which are used to transmit actions to the concrete. Inserts embedded in precast concrete elements during production, under FPC conditions and with the due reinforcement, intended for use only during transient situations for lifting and handling, are covered by the CEN/TR “Design and Use of Inserts for Lifting and Handling Precast Concrete Elements”, by CEN TC 229. 1.1.2 This CEN/TS is intended for applications in which the failure of fastenings will: 1) result in collapse or partial collapse of the structure, or 2) cause risk to human life, or 3) lead to significant economic loss. 1.1.3 The support of the fixture may be either statically determinate or statically indeterminate, defined as multiple anchor use in some European Technical Approvals (ETAs). Each support may consist of one fastener or a group of fasteners. 1.1.4 This CEN/TS is valid for applications which fall within the scope of the series EN 1992. In applications where special considerations apply, e.g. nuclear power plants or civil defence structures, modifications may be necessary. 1.1.5 This CEN/TS does not cover the design of the fixture. The design of the fixture shall be carried out to comply with the appropriate Standards. Requirements for stiffness and ductility of the fixture are given in clauses 5 and 8. 1.2 Type of fasteners and fastening groups 1.2.1 This CEN/TS applies to: a) cast-in fasteners such as headed fasteners, anchor channels with rigid connection between fastener and channel; b) post-installed anchors such as expansion anchors, undercut anchors, concrete screws, bonded anchors, bonded expansion anchors and bonded undercut anchors. For other types of fasteners modifications of the design provisions may be necessary. (...)

Standard NumberDD CEN/TS 1992-4-1:2009
TitleDesign of fastenings for use in concrete. General
StatusSuperseded, Withdrawn
Publication Date30 June 2009
Withdrawn Date19 October 2018
Normative References(Required to achieve compliance to this standard)EN 13501-2, EN 12390-7, EN 10002-1, EN 10088-2, EN 10088-3, ISO 273, EN 12390-3, EN 12390-2, ISO 13918:2008, ISO 1803:1997, ISO 5922:1981, EN 206-1, EN ISO 13918, EN 12504-1, ISO 898-2, EN 1998-1:2004, ISO 5922, EN 1990:2002, ISO 898-1, ISO 3506, EN 10080, EN 1993-1-8:2005, EN 1994-1-1:2004, EN 1992-1-1:2004, EN 1993-1-1:2005
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN 1992-4:2018
International RelationshipsCEN/TS 1992-4-1:2009
DescriptorsFire resistance, Durability, Loading, Fatigue, Failure (mechanical), Verification, Earthquake-resistant design, Concretes, Plastic analysis, Seismic loading, Structures, Structural systems, Strength of materials, Structural design, Fasteners
Title in FrenchConception-calcul des éléments de fixation pour béton. Généralités
Title in GermanBemessung von Befestigungen in Beton. Allgemeines
ISBN978 0 580 62635 7
File Size1.679 MB

*To ask about withdrawn titles contact the
Customer Relations
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents

Develop a PAS

Develop a fast-track standardization document in 9-12 months

Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version

Worldwide Standards
We can source any standard from anywhere in the world

Customers who bought this product also bought