BS EN 1218-1:1999+A1:2009 - Safety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table

BS EN 1218-1:1999+A1:2009

Safety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table

Status : Current, Under review   Published : November 1999

Price
£218.00
Member Price
£109.00
Become a member and SAVE 50%
on British Standards. Click to learn more
Format
PDF

Format
HARDCOPY



This document specifies all the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to single end tenoning machines with sliding table, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings. This standard does not apply to: a) machines where the tenon is produced only by means of saw blades; b) machines where the design speed of any tool spindle exceeds 6000 min-1; c) machines where the average sliding table feed speed in either direction exceeds 25 m min-1 + 5%; d) combined machines used for tenoning (see EN 940:1997); e) tenoning attachments on a vertical spindle moulding machine (see EN 848-1:2007). NOTE Single and double end tenoning machines fed by chain or chains are dealt with in EN 1218-2. Single end tenoning machines where the tenon is produced only by means of saw blades are dealt with in EN 1218-3. This European Standard is primarily applicable to machines which are manufactured after the date of issue of his standard.




Standard NumberBS EN 1218-1:1999+A1:2009
TitleSafety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table
StatusCurrent, Under review
Publication Date15 November 1999
Confirm Date25 September 2013
Normative References(Required to achieve compliance to this standard)IEC 60947-4-1:2000, IEC 60204-1:2005, EN 60947-4-1:2001, EN ISO 12100-2:2003, EN ISO 3745:2003, EN ISO 9614-1:1995, EN 61310-1:2008, ISO 13857:2008, HD 21.1 S4:2002, IEC 60947-5-1:2003, EN ISO 4871:1997, ISO 3743-1:1994, EN 848-1:2007, EN 1005-3:2002, ISO 3743-2:1994, EN 894-2:1997, EN 60529:1991, EN 1005-2:2003, ISO/TR 11688-1:1995, ISO 7960:1995, EN 1088:1995, EN 894-3:2000, EN 1005-4:2005, ISO 9614-1:1993, ISO 11202:1995, EN 894-1:1997, EN 983:1996, EN 1005-1:2001, ISO 11204:1995, ISO 7988:1988, EN 940:2009, EN 953:1997, ISO 4871:1996, EN 982:1996, EN 1037:1995, ISO 13850:2006, ISO 12100-2:2003, EN ISO 11688-1:1998, EN 60947-5-1:2004, EN ISO 13857:2008, EN ISO 3743-1:1995, ISO 3744:1994, ISO 3746:1995, ISO 3745:2003, EN ISO 3746:1995, IEC 60529:1989, EN 60204-1:2006, EN ISO 3744:1995, EN 349:1993, HD 22.1 S4:2002, ISO 230:1996, EN ISO 12100-1:2003, EN ISO 3743-2:1996, EN ISO 11202:1995, EN ISO 13850:2006, IEC 61310-1:2007, ISO 12100-1:2003, EN ISO 11204:1995, EN 614-1:2006, EN 847-1:2005
Informative References(Provided for Information)EN 1218-2:2004, 98/37/EC, 98/79/EC, EN 1218-3:2004, EN 614-2, 2006/42/EC
International RelationshipsEN 1218-1:1999+A1:2009
Amended ByAmendment, November 2009
Draft Superseded By09/30178372 DC
DescriptorsIsolator switches, Instructions for use, Position, Dust control, Woodworking machines, Electrical safety, Starting, Tables, Tool-holding devices, Handbooks, Cut-out devices, Machine tool components, Time, Hazards, Reliability, Velocity, Machine tools, Tenons, Single, Slideways, Stopping, Interlocks, Stability, Control devices, Machines working by stock removal, Machine guards, Safety devices, Spindles, Control systems, Occupational safety, Safety measures, Mechanical properties of materials, Performance, Equipment safety
ICS79.120.10
Title in FrenchSécurité des machines pour le travail du bois. Tenonneuses. Tenonneuses simples alimentées par table à rouleaux
Title in GermanSicherheit von Holzbearbeitungsmaschinen. Zapfenschneid- und Schlitzmaschinen. Einseitige Zapfenschneid- und Schlitzmaschinen mit Schiebetisch
CommitteeMTE/23
ISBN978 0 580 62151 2
PublisherBSI
FormatA4
DeliveryYes
Pages42
File Size733 KB
Price£218.00


Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world