BS EN 14010:2003+A1:2009 - Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages – BSI British Standards

BS EN 14010:2003+A1:2009

Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages

Status : Current, Under review   Published : February 2004

Format
PDF

Format
HARDCOPY



BS EN 14010:2003 + A1:2009 Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages

BS EN 14010 deals with the technical requirements to minimise risks related to the power driven parking of motor vehicles.

Requirements are given for the provision of information, which includes requirements for instructions. Electromagnetic compatibility requirements are also covered.

BS EN 14010 applies to equipment and systems for the power driven parking of motor vehicles
which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.

Contents of BS EN 14010:

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety and EMC requirements and/or safety measures
5.1 General
5.2 Control devices and equipment used for safety purposes
5.3 Electrical equipment
5.4 Hydraulic systems and hydraulic equipment
5.5 Load carrier
5.6 Lifting elements
5.7 Transmission elements
5.8 Non-automatic horizontally moving parking equipment in areas accessible to the user
5.9 Safety devices for non-automatic horizontally moving parking equipment
5.10 Non-automatic vertically moving parking equipment in areas accessible to the user
5.11 Automatic parking equipment
5.12 Design of the transfer area
6 Verification of safety and EMC requirements and/or measures
6.2 Special verification
6.3 Type testing
7 Information for use
7.1 Instruction handbook
7.2 Marking
Annex A (normative) Design criteria
Annex B (informative) Automatic parking equipment
Annex C (normative) Design criteria
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Annex ZC (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2004/108/EC
Bibliography




Standard NumberBS EN 14010:2003+A1:2009
TitleSafety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages
StatusCurrent, Under review
Publication Date11 February 2004
Normative References(Required to achieve compliance to this standard)EN 12385-4, EN ISO 12100-1:2003, EN 61310-1, EN 60947-5-1:1997, EN 1005-2, EN ISO 12543-2, ISO 12543-2:1998, ISO 12100-1:2003, EN 61496-1, EN 12433-1, ISO 14122-1:2001, EN 457, prEN 13241, prEN 12624, EN 1088, EN 12978, EN 1837, EN 811, prEN 13411-6, ISO 7731:1986, EN 418:1992, EN 12453:2017, EN 1037:1995, IEC 61000-6-3:1996, IEC 61000-6-2:1999, EN 954-1:1996, IEC 60204-1:1997, EN 294:1992, EN 12604:2017, IEC 61310-1:1995, EN 982:1996, ISO 13050:1999, EN 1050:1996, ISO 7000, IEC 61310-2:1995, IEC 60947-5-1:1997, EN 12635, EN 953, EN ISO 12100-2:2003, EN 61000-6-3, EN 13411-2, EN 61310-2, EN 12385-5, EN ISO 14122-2, ISO/FDIS 14122-4:2002, EN ISO 14122-1, ISO 14122-3:2001, ISO 12100-2:2003, IEC 61496:1997, EN 12150-1, IEC 61496-2, EN 60529, EN 842, prEN ISO 14122-4, EN 1005-3, EN 894-2, EN 1760-2, EN 60204-1:1997, ISO 3864, EN 61000-6-2, IEC 60529:1989, EN 349:1993, ISO 14122-2:2001, prEN 13411-3, EN ISO 14122-3
Informative References(Provided for Information)2004/108/EC, DIN 15350, FEM 9.661, ASS 134, FEM 9.755, ZH1/361, FEM 9.754, 2006/42/EC, FEM 9.831, EN 894-1, EN 894-3, EN 1493, EN 1005-1, ENV 1993, CLC Report R044-001:1995, FEM 9.311, FEM 9.753, EN 547-3, ISO 2408:1985, ENV 1991, AMHSA SC 2, EN 81-1:1998, ISO 606:1994, EN 81-2:1998, ISO 14:1982, ISO 12543-1:1998, EN 528:1996, ISO 4308-1:1986, EN 280, 98/79/EC, ENV 1992, EN 547-1, ISO 4301-2:1985, EN ISO 12543-1, ON M 9610, 98/37/EC
International RelationshipsEN 14010:2003+A1:2009
Amended ByAmendment, October 2009
Draft Superseded By08/30176097 DC
DescriptorsSafety devices, Verification, Instructions for use, Occupational safety, Marking, Installation, Materials handling, Equipment safety, Production, Bulk materials, Commissioning, Materials handling equipment, Hazards, Design, Unit loads, Safety measures
ICS33.100.01
53.020.99
53.080
Title in FrenchSécurité des machines. Dispositif de stationnement motorisé des véhicules automobiles. Exigences concernant la sécurité et la CEM pour les phases de conception, construction, montage et mise en service
Title in GermanSicherheit von Maschinen. Kraftbetriebene Parkeinrichtungen für Kraftfahrzeuge. Sicherheits- und EMV-Anforderungen an Gestaltung, Herstellung, Aufstellung und Inbetriebnahme
CommitteeMHE/12
ISBN978 0 580 61617 4
PublisherBSI
FormatA4
DeliveryYes
Pages62
File Size0.9883 MB
Price£254.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.


Worldwide Standards
We can source any standard from anywhere in the world