BS EN ISO 1456:2009 - Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium – BSI British Standards

Find Similar Items

This product falls into the following categories.

You may find similar items within these categories by selecting from the choices below:

BS EN ISO 1456:2009

Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium

Status : Confirmed, Current   Published : August 2009

Format
PDF

Format
HARDCOPY



BS EN ISO 1456:2009 Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium

BS EN ISO 1456 specifies the requirements for decorative nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium coatings that are applied to iron, steel, zinc alloys, copper and copper alloys, and to aluminium and aluminium alloys, to provide an attractive appearance and enhanced corrosion resistance.

Coating designations are specified that differ in thickness and type, and guidance is given on selecting the coating designation appropriate for the service conditions to which the coated product will be exposed.

BS EN ISO 1456 does not specify the surface condition required by the basis metal prior to the coating process, and is not applicable to coatings on sheet, strip or wire in the non-fabricated form nor to threaded fasteners or coil springs.

Requirements for decorative, electroplated copper plus nickel plus chromium coatings on plastic materials are specified in ISO 4525. ISO 4526 and ISO 6158 specify requirements for coatings of nickel and chromium, respectively, for engineering purposes.


Contents of BS EN ISO 1456 include:

Scope
Normative references
Terms and definitions
Information to be supplied by the purchaser to the processor
Essential information
Additional information
Designation specifications
Service-condition number
Type of copper coating
Types of nickel coating
Types and thicknesses of chromium
Requirements
Appearance
Coating thickness
Double- and triple-layer nickel coatings
Adhesion.
Corrosion resistance in CASS, Corrodkote and salt spray tests
STEP test requirements
Ductility
Stress-relief heat treatments before coating
Hydrogen-embrittlement-relief treatment
Sampling
Determination of cracks and pores in chromium coatings
Methods of test for the determination of thickness
Ductility test
Determination of the sulfur content of electrodeposited nickel
Step test method
Bibliography

BS EN ISO 1456 may not be compliant with some countries’ health and safety legislations. It calls for the use of substances and/or procedures that may be injurious to health if adequate safety measures are not taken.

BS EN ISO 1456 does not address any health hazards, safety or environmental matters and legislations associated with its use. It is the responsibility of the user of the standard to establish appropriate health, safety and environmentally acceptable practices, and take suitable actions to comply with any national and international regulations.

Compliance with this BS EN ISO 1456 does not automatically confer immunity from legal obligations.




Standard NumberBS EN ISO 1456:2009
TitleMetallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
StatusConfirmed, Current
Publication Date31 August 2009
Confirm Date27 December 2017
Cross ReferencesISO 1463, ISO 2064, ISO 2080, ISO 2177, ISO 2361, ISO 2819, ISO 3497, ISO 3543, ISO 3882, ISO 4519, ISO 4541:1978, ISO 9220, ISO 9587, ISO 9588, ISO 10289, ISO 10587, ISO 15724, ISO 16348, ISO 27831-2, ISO 2859, ISO 4525, ISO 4526, ISO 6158, ISO 9227, ISO 27830, ISO 27831-1, ASTM B117, ASTM B368, ASTM B764, ASTM E527, DIN 50022
ReplacesBS EN 12540:2000
International RelationshipsEN ISO 1456:2009,ISO 1456:2009
Draft Superseded By08/30173695 DC
DescriptorsSteels, Corrosion resistance, Corrosion protection, Chromium, Coatings, Decorative coatings, Copper, Metal coatings, Thickness, Copper alloys, Heat treatment, Nickel, Aluminium alloys, Aluminium, Designations, Iron, Electroplating, Zinc alloys, Electrodeposition
ICS25.220.40
Title in FrenchRevêtements métalliques et autres revêtements inorganiques. Dépôts électrolytiques de nickel, de nickel plus chrome, de cuivre plus nickel et de cuivre plus nickel plus chrome
Title in GermanMetallische und andere anorganische Überzüge. Galvanische Überzüge aus Nickel, Chrom-Nickel und Kupfer-Chrom-Nickel
CommitteeSTI/33
ISBN978 0 580 60954 1
PublisherBSI
FormatA4
DeliveryYes
Pages34
File Size596 KB
Price£206.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


27 November

Organizational Resilience Annual Conference 2019


BSOL

The faster, easier way to work with standards


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought

  • BS 7371-3:2009
    Coatings on metal fasteners Specifications for electroplated zinc coatings
  • BS 3643-1:2007
    ISO metric screw threads Principles and basic data
  • BS ISO 4525:2003
    Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
  • BS 7371-1:2009
    Coatings on metal fasteners Specification for general requirements and selection guidelines