BS EN ISO 10304-1:2009 - Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate – BSI British Standards

BS EN ISO 10304-1:2009

Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate

Status : Confirmed, Current   Published : April 2009

Format
PDF

Format
HARDCOPY



BS EN ISO 10304-1:2009 Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulphate

BS EN ISO 10304-1 specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, e.g. drinking water, ground water, surface water, waste water, leachates and marine water by liquid chromatography of ions.

The lower limit to which BS EN ISO 10304-1 applies is W 0,05 mg/l for bromide and for nitrite, and W 0,1 mg/l for chloride, fluoride, nitrate, orthophosphate, and sulfate. The lower limit of to which BS EN ISO 10304-1 applies depends on the matrix and the interferences encountered.

The working range may be expanded to lower concentrations (e.g. W 0,01 mg/l) if an appropriate pre-treatment of the sample (e.g. conditions for trace analyses, pre-concentration technique) is applied, and/or if an ultraviolet (UV) detector (for bromide, nitrate and nitrite) is used.

Contents of BS EN ISO 10304-1:

  • Foreword
  • Introduction
  • Scope
  • Normative references
  • Interferences
  • Principle
  • Reagents
  • Apparatus
  • Sampling and sample pre-treatment
  • Procedure
  • Calculation
  • Expression of results
  • Test report
  • Performance data
  • Checked interferences
  • Bibliography



Standard NumberBS EN ISO 10304-1:2009
TitleWater quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
StatusConfirmed, Current
Publication Date30 April 2009
Confirm Date11 July 2016
Normative References(Required to achieve compliance to this standard)ISO 8466-1, ISO 8466-2, ISO 3696, ISO 5667-3, ISO 10304-2:1995, ISO 10304-1:1992
Informative References(Provided for Information)ISO 5725-2:2019, BS ISO 5725-2:2019, ISO 5667-1
ReplacesBS EN ISO 10304-1:1995, BS 6068-2.46:1995, BS EN ISO 10304-2:1997, BS 6068-2.53:1997
International RelationshipsISO 10304-1:2007,EN ISO 10304-1:2009
Draft Superseded By06/30126102 DC
DescriptorsSurface water, Chemical analysis and testing, Quality, Nitrites, Potable water, Determination of content, Bromides, Sulfates, Orthophosphates, Interferences (chemical), Ground water, Anions, Chlorides, Water, Chemical water pollutants, Water pollution, Nitrates, Water testing, Fluorides, Liquid chromatography
ICS13.060.50
Title in FrenchQualité de l'eau. Dosage des anions dissous par chromatographie des ions en phase liquide. Dosage du bromure, chlorure, fluorure, nitrate, nitrite, phosphate et sulfate
Title in GermanWasserbeschaffenheit. Bestimmung von gelösen Anionen mittels Flüssigkeits-Ionenchromatographie. Bestimmung von Bromid, Chlorid, Fluorid, Nitrat, Nitrit, Phosphat und Sulfat
CommitteeEH/3/2
ISBN978 0 580 65935 5
PublisherBSI
FormatA4
DeliveryYes
Pages24
File Size442 KB
Price£182.00


 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Worldwide Standards
We can source any standard from anywhere in the world


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Develop a PAS

Develop a fast-track standardization document in 9-12 months