BS EN ISO 6145-6:2008 - Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices – BSI British Standards

BS EN ISO 6145-6:2008

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices

Status : Superseded, Withdrawn   Published : May 2003 Replaced By : BS EN ISO 6145-6:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN ISO 6145-6:2008 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices.

BS EN ISO 6145-6 specifies a method for the continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of critical orifice systems.

BS EN ISO 6145-6 also provides methods by which the volume fraction of the calibration component in the calibration gas mixture can be varied.

The merits of BS EN ISO 6145-6 are that multi-component mixtures can be prepared as readily as binary mixtures. Also, the range of flow rates can be from several millilitres per minute to approximately 10 l/min.

BS EN ISO 6145-6 applies to the preparation of gas mixtures at barometric pressure. It also provides a means of preparation of calibration gas mixtures at pressures above barometric pressure.

BS EN ISO 6145-6 also gives practical hints on the use of this method.

Contents of BS EN ISO 6145-6:

Scope
Normative references
Principle
Application to preparation of gas mixtures
Description of the orifice system and the experimental procedure
Area of validity
Operating conditions
Calculation of operating parameters and results
Selection of suitable orifice systems
Calculation of volume fraction
Sources of uncertainty
Uncertainty of volume fraction
Premixed gases for preparation of mixtures of high dilution
Practical hints
Bibliography

 




Standard NumberBS EN ISO 6145-6:2008
TitleGas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
StatusSuperseded, Withdrawn
Publication Date16 May 2003
Withdrawn Date04 September 2017
Normative References(Required to achieve compliance to this standard)ISO 6143, ISO 6145-1
Informative References(Provided for Information)VDI 3490-16, ISO 6145-7:2001, GUM:1993, ISO 7504
Replaced ByBS EN ISO 6145-6:2017
ReplacesBS 4559-5.6:1987, ISO 6145-6:1986
International RelationshipsISO 6145-6:2003,EN ISO 6145-6:2008
Amended ByCorrigendum, February 2009
DescriptorsOrifice flowmeters, Gas analysis, Flow measurement, Flow rates, Error analysis, Mixtures, Errors, Formulae (mathematics), Calibration, Volumetric analysis
ICS71.040.40
Title in FrenchAnalyse des gaz. Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques. Orifices critiques
Title in GermanGasanalyse. Herstellung von Kalibriergasgemischen mit Hilfe von dynamisch-volumetrischen Verfahren. Kritische Düsen
CommitteePTI/15
ISBN978 0 580 60360 0
PublisherBSI
FormatA4
DeliveryYes
Pages20
File Size716 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


BSOL

The faster, easier way to work with standards


Collaborate, Innovate, Accelerate.