BS EN 1982:2008 - Copper and copper alloys. Ingots and castings – BSI British Standards

BS EN 1982:2008

Copper and copper alloys. Ingots and castings

Status : Superseded, Withdrawn   Published : May 2008 Replaced By : BS EN 1982:2017

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


If your foundry produces copper and copper alloy ingots, or you use copper in castings for mechanical applications, then you’d want to ensure that the copper products you produce conform to the specifications required by the industry.

Likewise if you are purchasing copper and copper alloy ingots or use copper castings, you’d want to be sure the raw materials used are of the quality that your customers demand.

BS EN 1982 is the European standard that specifies the composition, mechanical properties and other relevant characteristics of different castings and ingots of copper and its alloys.

Using technical specifications and common parameters to check technical delivery conditions, product specifications and test methods can benefit your organization to ensure you consistently deliver the exact product and exceed quality assurance targets; help streamline manufacturing processes to gain efficiencies; make time and cost savings; and increase focus on company long-term growth.

BS EN 1982’s purpose is to assist the purchaser in providing full information to the supplier to ensure that he supplies castings to the purchaser's intended requirements. It is recommended that full consultation takes place between the purchaser and the supplier at the stages of enquiry and ordering.

The sampling procedures and test methods for the verification of conformity to the requirements of this standard are also specified.

This standard is applicable to:

  •  Copper alloy ingots intended to be remelted for the production of castings
  • Copper and copper alloy castings which are intended for use without subsequent working other than machining. The castings may be manufactured by the sand, permanent mould, centrifugal, continuous or pressure die casting process.

Recommended practice for the ordering and supply of castings is included in an annex to the standard. Optional supplementary inspection procedures for ingots and castings are included in a second annex.

Contents of BS EN 1982 includes:

  • Foreword
  • Scope
  • Normative references
  • Terms and definitions
  • Designations
  • Ordering information
  • Requirements
  • Sampling and testing rates
  • Test methods
  • Declaration of conformity and inspection documentation
  • Marking, labelling, packaging
  • Recommended code of practice for the ordering and supply of copper and copper alloy castings
  • Optional supplementary inspection procedures for ingots and castings
  • Relationship between this European Standard and the Essential
  • Requirements of the EU Pressure Equipment Directive (PED) 97/23/EC
  • Bibliography

This European standard for copper alloy ingots, and copper and copper alloy castings is based on previous national standards and harmonizes the compositions and mechanical properties required.

BS EN 1982 does not include copper refinery shapes which are intended for working into wrought products. These are covered in  BS EN 1976 Copper and copper alloys. Cast unwrought copper products. Master alloys intended for the manufacture of copper alloys are covered in  BS EN 1981 Copper and copper alloys. Master alloys.

The essential information relevant to correct ordering, given in Clause 5 of the standard, is supplemented by Annex A, which is based upon the recommended practice for the ordering and supply of castings given in EN 1559-1.

Sampling and testing rates, where applicable, are specified. For certain applications, more rigorous inspection procedures may be required. A range of supplementary inspection procedures that may be invoked, at the option of the purchaser are also covered.

BS EN 1982:2008 replaces BS EN 1982:1999 which has been withdrawn




Standard NumberBS EN 1982:2008
TitleCopper and copper alloys. Ingots and castings
StatusSuperseded, Withdrawn
Publication Date30 May 2008
Withdrawn Date10 October 2017
Normative References(Required to achieve compliance to this standard)ISO 2624:1990, EN ISO 2624, EN ISO 6506-1, EN 1655, ISO 6506-1:2005, ISO 6509:1981, EN 10002-1, EN 10204, EN ISO 6509
Informative References(Provided for Information)ISO 31-0:1992, EN 1371-2, 97/23/EC, EN 1559-1, EN 1370, EN 1412, EN 1981, EN 1371-1, EN 1976, EN ISO 9001, ISO 8062, ISO 1190-1, ISO 9001:2000
Replaced ByBS EN 1982:2017
ReplacesBS EN 1982:1999
International RelationshipsEN 1982:2008
Draft Superseded By07/30168419 DC
DescriptorsCopper alloys, Electrical conductivity, Grain size, Mechanical testing, Grades (quality), Designations, Electrical properties of materials, Leak tests, Ordering, Ingots, Inspection, Elongation, Castings, Hardness measurement, Tensile testing, Chemical composition, Casting (process), Mechanical properties of materials, Copper, Electrical testing, Crystal microstructure, Proof stress, Certificates of conformity, Compositional tolerances, Marking
ICS77.150.30
Title in FrenchCuivre et alliages de cuivre. Lingots et pièces moulées
Title in GermanKupfer und Kupferlegierungen. Blockmetalle und Gussstücke
CommitteeNFE/34
ISBN978 0 580 59454 0
PublisherBSI
FormatA4
DeliveryYes
Pages50
File Size427 KB
Price£240.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


Collaborate, Innovate, Accelerate.


BSOL

The faster, easier way to work with standards


Tracked Changes

Understand the changes made to a standard with our new Tracked Changes version


Customers who bought this product also bought

  • BS EN 10277-2:2008
    Bright steel products. Technical delivery conditions Steels for general engineering purposes
  • BS EN 1706:2010
    Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
  • BS EN 1286:1999
    Sanitary tapware. Low pressure mechanical mixing valves. General technical specification
  • BS EN 10277-5:2008
    Bright steel products. Technical delivery conditions Steels for quenching and tempering