BS EN ISO 14341:2008 - Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification – BSI British Standards

BS EN ISO 14341:2008

Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification

Status : Revised, Withdrawn   Published : June 2008 Replaced By : BS EN ISO 14341:2011

WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001


BS EN ISO 14341:2008 recognizes that there are two somewhat different approaches in the global market to classifying a given wire electrode, and allows for either or both to be used, to suit a particular market need. Application of either type of classification designation (or both where suitable) identifies a product as classified according to this Standard.

BS EN ISO 14341:2008 specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum tensile strength of up to 570 N/mm2. One wire electrode can be tested and classified with different shielding gases.

This document constitutes a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.

It should be noted that the mechanical properties of all-weld metal test specimens used to classify the electrodes will vary from those obtained in production joints because of differences in welding procedure such as electrode size, width of weave, welding position and material composition.




Standard NumberBS EN ISO 14341:2008
TitleWelding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
StatusRevised, Withdrawn
Publication Date30 June 2008
Withdrawn Date28 February 2011
Normative References(Required to achieve compliance to this standard)ISO 31-0:1992, ISO 544, ISO 13916, ISO 14175:1997, ISO 14344, ISO 15792-1:2000
Informative References(Provided for Information)No other standards are informatively referenced
Replaced ByBS EN ISO 14341:2011
ReplacesBS EN 440:1995
International RelationshipsEN ISO 14341:2008,ISO 14341:2002
DescriptorsConsumable electrodes, Welding electrodes, Filler metal, Arc-welding equipment, Wires, Gas-shielded welding, Gas metal-arc welding, Welding equipment, Unalloyed steels, Steels, Classification systems, Yield strength, Elongation, Tensile strength, Impact strength, Chemical composition, Designations
ICS25.160.20
Title in FrenchProduits consommables pour le soudage. Fils-électrodes et dépôts pour le soudage à l'arc sous protection gazeuse des aciers non alliés et à grains fins. Classification
Title in GermanSchweißzusätze. Drahtelektroden und Schweißgut zum Metall-Schutzgasschweißen von unlegierten Stählen und Feinkornstählen. Einteilung
CommitteeWEE/39
ISBN978 0 580 59121 1
PublisherBSI
FormatA4
DeliveryNo
Pages20
File Size474.6 KB
Price£130.00


WITHDRAWN TITLE
*To ask about withdrawn titles contact the
BSI Customer Services
cservices@bsigroup.com, +44 345 086 9001
 Your basket
Your basket is empty

Multi-user access to over 3,500 medical device standards, regulations, expert commentaries and other documents


BSOL

The faster, easier way to work with standards


Develop a PAS

Develop a fast-track standardization document in 9-12 months


Worldwide Standards
We can source any standard from anywhere in the world


Customers who bought this product also bought